• THREADED BARRELS FOR GLOCKS® SILENCERCO More Detail

    THREADED BARRELS FOR GLOCKS® SILENCERCO

    Click here for price!$189.99 - $229.99Click here for price!$189.99 - $229.99

    Silencerco’s threaded barrels for Glock® handguns are made from 416R stainless steel with a black nitride finish. These fit both Gen 3 and Gen 4 Glocks®. 9mm barrels have 1/2x28 threads, while the .45 ACP barrel has .578x28. Includes thread protector. “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.

    HOT!
  • SIG P226 THREADED BARREL 9MM 1/2X28 SILENCERCO More Detail

    SIG P226 THREADED BARREL 9MM 1/2X28 SILENCERCO

    Click here for price!$189.99Click here for price!$189.99

    The only thing better than a normal pistol barrel is a threaded pistol barrel. All pistol silencers require one. This Silencerco barrel allows for your Sig Sauer P226 to adapt to suppressor use.  Threaded in ½-28, it is compatible with most 9mm suppressors on the market.  Matte black nitride finish provides superior durability & reliability.  Barrel is precision machined to ensure the perfect fit. ½-28 threads 416R Stainless Steel 1-10RH twist 9x19mm Holding to the same commitment to quality as all our products, our threaded barrels are tough enough to hold up under the harshest conditions.

    HOT!
  • 1911 DROP-IN MATCH BARRELS ED BROWN More Detail

    1911 DROP-IN MATCH BARRELS ED BROWN

    Click here for price!$179.99Click here for price!$179.99

    No Fitting Required For Match Grade AccuracyCNC machined with slightly oversized dimensions for tighter barrel lockup and a Match Quality, drop-in fit. Premium stainless steel bar stock is machined, heat treated and cryo stress relieved before final rifling to improve accuracy and barrel life. Precision, broach cut rifling gives outstanding accuracy with all bullet types, including lead. Complete kit includes pre-fit, match-grade barrel, bushing, link and pin for faster installation. May require minor fitting. 1911, Issue:11, Page:005 Big Book Catalog, Issue:69, Page:099 Sinclair, Issue:1A, Page:004 Sinclair, Issue:1A, Page:005

    HOT!
  • 1911 45 ACP SUPPRESSOR READY THREADED BARRELS ED BROWN More Detail

    1911 45 ACP SUPPRESSOR READY THREADED BARRELS ED BROWN

    Click here for price!$249.99Click here for price!$249.99

    Identical to the standard drop-in Ed Brown barrel, but longer length and threaded for use with suppressors. Thread size is 0.578 x 28 tpi RH. Includes link, link pin, bushing and thread protector. Barrel accuracy comes from using the highest quality materials and manufacturing methods. Ed Brown Products is committed to both.  The barrels are made from T-416 modified, gun barrel quality stainless steel bar stock, just like a benchrest rifle barrel.  T-416 is certified pure, there are no foreign materials, and no hard or soft spots to worry about. It is stress-relieved and heat-treated prior to final rifling and refinishing. Ed Brown barrels are precision machine cut from a 3 pound chunk bar of this top quality steel. Ed Brown barrels are rifled by precision broach in the original six lands and grooves, one turn in sixteen, left hand twist as originally designed by John Browning. This deep cut, broached rifling gives superior accuracy with all types of bullets, including lead.  Ed Brown barrels are heat-treated by an aerospace certified heat treat facility, and sub-zero frozen for maximum strength and stress relief. This means more accuracy and longer barrel life to the shooter. Ed Brown has also cut the dimensions to max tolerance on the outside of the barrel. This means less fitting work for you, and more accuracy. A suppressor equipped with a Nielsen device (such as 276-000-055) is REQUIRED for reliability in a 1911. This is also referred to as a booster, kicker, or Linear Inertial Decoupler. Big Book Catalog, Issue:69, Page:099

    HOT!
  • MATCH BARRELS FOR G17 & G19 THREADED ZEV TECHNOLOGIES More Detail

    MATCH BARRELS FOR G17 & G19 THREADED ZEV TECHNOLOGIES

    Click here for price!$285.00Click here for price!$285.00

    Zev Technologies™ Match Grade drop-in Glock® replacement barrels feature extremely tight tolerances and are manufactured with pre-hardened chromium stainless steel (416R) that was originally designed for use in Match Grade rifle barrels. This material provides high tensile strength and toughness to withstand typical chamber pressures while still being highly corrosion resistant. ZEV Match Grade barrel bores are some of the most precise in the industry. Every barrel is double honed (rough and finish) until a minimum surface finish of 16 RA is reached. During this process the barrels are held to a final dimension of +/- 0.0002" for consistency and accuracy. The barrels are cut rifled and 100% inspected for groove dimensions and broach finish. Available finishes: Raw Stainless Steel Black DLC (Diamond-Like Carbon) Burnt Bronze

    HOT!
  • ULTRA MATCH BARRELS BLACKLIST INDUSTRIES LLC More Detail

    ULTRA MATCH BARRELS BLACKLIST INDUSTRIES LLC

    Click here for price!$204.99 - $209.99Click here for price!$204.99 - $209.99

    Blacklist Industries Ultra Match barrels are some of the most precise match grade barrels in the industry. Precision Machined from certified 416R stainless steel bar stock for superior strength and durability. Critical manufacturing tolerances, multiple quality-control checks, and an advanced broach rifling process allows us to guarantee the exact same accuracy from each and every barrel while also achieving greater accuracy over a stock barrel. Eight column flutes are added at safe depths which provide a custom look and finish to the barrels. Their barrels also feature a recess crown at the muzzle. The recess crown preserves the barrels accuracy by preventing the very edge of the rifling from being exposed or damaged in any way that can affect the dynamics of the bullet. Their fully supported match chamber is compatible with all bullet materials and reduces the risk of dangerous pressure spikes that are common in most stock barrels.

    HOT!
  • MATCH BARRELS FOR G17 & G19 ZEV TECHNOLOGIES More Detail

    MATCH BARRELS FOR G17 & G19 ZEV TECHNOLOGIES

    Click here for price!$237.50Click here for price!$237.50

    Zev Technologies™ Match Grade drop-in Glock® replacement barrels feature extremely tight tolerances and are manufactured with pre-hardened chromium stainless steel (416R) that was originally designed for use in Match Grade rifle barrels. This material provides high tensile strength and toughness to withstand typical chamber pressures while still being highly corrosion resistant. ZEV Match Grade barrel bores are some of the most precise in the industry. Every barrel is double honed (rough and finish) until a minimum surface finish of 16 RA is reached. During this process the barrels are held to a final dimension of +/- 0.0002" for consistency and accuracy. The barrels are cut rifled and 100% inspected for groove dimensions and broach finish. Available finishes: Raw Stainless Steel Black DLC (Diamond-Like Carbon) Burnt Bronze

    HOT!
  • 1911 PRECISION QUALITY BARREL KART PRECISION BARREL More Detail

    1911 PRECISION QUALITY BARREL KART PRECISION BARREL

    Click here for price!$159.99 - $199.99Click here for price!$159.99 - $199.99

    Uncompromising Quality For Added Performance & Better AccuracyForged from ordnance steel to strict, national match specs; rifled by a proprietary technique that holds lands and grooves to exceptionally close tolerances and leaves the surface finish mirror smooth. Air gauged to maintain .0002" tolerance through the bore. Feed ramps are throated for wadcutter ammo. Standard Barrel - Non-ramped, oversize hood, top and bottom lugs to achieve an exact fit for optimum match accuracy. Ramped Barrel - Fully supports the case head; gives direct feeding from magazine to chamber. 1911, Issue:11, Page:005 Big Book Catalog, Issue:69, Page:099 Sinclair, Issue:1A, Page:005

    HOT!
  • ALPHAWOLF THREADED BARRELS FOR GLOCK® LONE WOLF DIST. More Detail

    ALPHAWOLF THREADED BARRELS FOR GLOCK® LONE WOLF DIST.

    Click here for price!$169.95Click here for price!$169.95

    Alpha Wolf barrels establish the benchmark for absolute accuracy and combat reliability. It is the pinnacle of what every other barrel manufacturer strives to be. Exaction tolerances allow for a drop in installation. Designed for lead, plated, or jacketed ammunition. Heat treated to RC 40-42, then Salt Bath Nitride coated. Threaded models fome with appropriate thread protector.

    HOT!
  • ALPHAWOLF CONVERSION BARRELS FOR GLOCK® LONE WOLF DIST. More Detail

    ALPHAWOLF CONVERSION BARRELS FOR GLOCK® LONE WOLF DIST.

    Click here for price!$149.95 - $169.95Click here for price!$149.95 - $169.95

    Alpha Wolf barrels establish the benchmark for absolute accuracy and combat reliability. It is the pinnacle of what every other barrel manufacturer strives to be. Exaction tolerances allow for a drop in installation. Designed for lead, plated, or jacketed ammunition. Converts .40 S&W and  .357 Sig to 9mm. Heat treated to RC 40-42, then Salt Bath Nitride coated.

    HOT!
  • S&W M&P THREADED BARRELS SILENCERCO More Detail

    S&W M&P THREADED BARRELS SILENCERCO

    Click here for price!$189.99Click here for price!$189.99

    This Silencerco barrel allows for your Smith & Wesson M&P to adapt to suppressor use.  Threaded in ½-28 or .578x28, it is compatible with most suppressors on the market.  Matte black nitride finish provides superior durability & reliability.  Barrel is precision machined to ensure the perfect fit. ½-28 or .578x28 threads 416R Stainless Steel 1-10RH twist for 9mm 1-16LH twist for 45ACP 9x19mm or 45ACP Holding to the same commitment to quality as all our products, our threaded barrels are tough enough to hold up under the harshest conditions. NOTE: For the Full Size M&P pistols with 4.25" (9mm) and 4.6" (.45 ACP) barrels. Will NOT fit the Pro or "L" Series with 5" or longer barrels.

    HOT!
  • BERETTA 92FS/M9 THREADED BARREL SILENCERCO More Detail

    BERETTA 92FS/M9 THREADED BARREL SILENCERCO

    Click here for price!$199.99Click here for price!$199.99

    Sets You Up To Shoot Your Beretta With a Sound Suppressor The Silencerco Beretta 92F / 92FS / M9 Threaded Pistol Barrel turns your “Plain-Jane” Beretta into a suppressor ready host. The Silencerco Beretta 92F / 92FS / M9 Threaded Pistol Barrel does not require an XL piston. A normal ½"-28 tpi piston will provide reliable function. Threaded 1/2"-28 to accept a wide variety of pistol suppressors 1-10" twist rate Machined from 416R stainless steel Nonreflective black nitride finish Silencerco's Beretta 92F / 92FS / M9 Threaded Pistol Barrel comes ready drop-in into your pistol, and each ships with a thread protector to guard against damage to the threads when you're shooting unsuppressed.

    HOT!
  • 1911 XACT FIT BARREL KIT KART PRECISION BARREL More Detail

    1911 XACT FIT BARREL KIT KART PRECISION BARREL

    Click here for price!$199.99 - $244.99Click here for price!$199.99 - $244.99

    Achieve A Match Quality Barrel Installation Using Only Hand Tools Install a precision quality barrel using just four small hand tools. The only fitting required is to adjust lockup with the two raised pads located on either side of the rear locking groove, cut the barrel hood to correct length and fit the bushing to the slide. A national match bushing is pre-fit to the barrel; has oversize O.D. for precise fitting to slide. Bottom lugs are fully finished and the correct length link installed to save hours of work. 1911, Issue:11, Page:005 Big Book Catalog, Issue:69, Page:099 Sinclair, Issue:1A, Page:005

    HOT!
  • SEMI-FIT BARRELS FOR SIG SAUER BAR-STO PRECISION MACHINE More Detail

    SEMI-FIT BARRELS FOR SIG SAUER BAR-STO PRECISION MACHINE

    Click here for price!$225.00Click here for price!$225.00

    These Sig Sauer barrels are "Semi Fit", meaning they general require little to no fitting.  Barrels may drop-in, but expect some fitting to be necessary.  Barrels are stock length for either the 226 or 229.  229 barrels are available in .357 Sig or .40 S&W. Bar-Sto Precision Machine has been making some of the finest auto-pistol barrels since 1971. Bar-Sto barrels have been used by the U.S. Marine Corps Marksman Unit since 1977. All Bar-Sto Pistol barrels are machined from solid 416 stainless steel bar stock which has been heat treated 39 to 43 RC and 180,000 PSI tensile strength. Barrels are machined, bored, and rifled completely in Bar-Sto's own shop. All barrels have a rate of twist of 1 turn in 16".

    HOT!
  • ALPHAWOLF BARRELS FOR GLOCK® LONE WOLF DIST. More Detail

    ALPHAWOLF BARRELS FOR GLOCK® LONE WOLF DIST.

    Click here for price!$149.95Click here for price!$149.95

    Alpha Wolf barrels establish the benchmark for absolute accuracy and combat reliability. It is the pinnacle of what every other barrel manufacturer strives to be. Exact tolerances allow for a drop in installation. Designed for lead, plated, or jacketed ammunition. Heat treated to RC 40-42, then Salt Bath Nitride coated.

    HOT!
  • SEMI DROP-IN BARRELS FOR S&W M&P APEX TACTICAL SPECIALTIES INC. More Detail

    SEMI DROP-IN BARRELS FOR S&W M&P APEX TACTICAL SPECIALTIES INC.

    Click here for price!$199.95Click here for price!$199.95

    The Apex Grade Semi Drop-In Barrel for the S&W M&P is available in either a 5.00" or 4.25" option. The stainless steel barrel features a 1:10" twist rate. The design increases accuracy performance, making the M&P capable of shooting as small as a 1-1/2 inch grouping at 25 yards. Accuracy test results based on using a mechanical rest. Final results may vary based on shooter ability, ammunition selection, and variations in factory firearm tolerances. Direct drop-in replacement of factory barrel. Improves accuracy and optimal performance is seen with bullet weights of 115 gr. Through 147gr. Using 9mm jacketed ammunition. Due to variations in factory slide tolerances, slight fitting may be required and is easily performed by the end user.We recommend the use of the 6" #0 Narrow Pillar File, 191-400-760, for installation of the barrels. Patent Pending. Big Book Catalog, Issue:69, Page:209

    HOT!
  • 1911 DROP-IN MATCH BARRELS 9MM ED BROWN More Detail

    1911 DROP-IN MATCH BARRELS 9MM ED BROWN

    Click here for price!$185.00Click here for price!$185.00

    CNC machined with slightly oversized dimensions for tighter barrel lockup and a “Match Quality”, drop-in fit. Premium stainless steel bar stock is machined, heat treated and cryo stress relieved before final rifling to improve accuracy and barrel life. Precision, broach cut rifling gives outstanding accuracy with all bullet types, including lead. Complete kit includes pre-fit, match-grade barrel, bushing, link and pin for faster installation. May require minor fitting.

    HOT!
  • BARRELS for GLOCK® STORM LAKE More Detail

    BARRELS for GLOCK® STORM LAKE

    Click here for price!$148.99 - $172.99Click here for price!$148.99 - $172.99

    Provides Easy Installation & Superb Accuracy; Stainless Steel Give Unique Contrast To Black Slide Machined, 416 stainless steel barrels are held to tolerances of .001" to ensure maximum accuracy and a precision fit. Features cut-broach rifling with 1-16 twist that’s great for cast bullets. May require minor fitting. All barrels are chambered for full case support “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products. Big Book Catalog, Issue:69, Page:211

    HOT!
  • THREADED PISTOL BARRELS ADVANCED ARMAMENT More Detail

    THREADED PISTOL BARRELS ADVANCED ARMAMENT

    Click here for price!$214.99Click here for price!$214.99

    Threaded pistol barrels chambered in 9mm and 45 Auto.  Precision CNC machined from 416R stainless steel with a black Isonite QPQ finish, all AAC silencer ready barrels feature cut broach rifling for compatibility with jacketed and lead ammunition. AAC silencer ready barrels are designed to drop in and function with no fitting required, and feature chamber dimensions that will accept all commercial, SAAMI specification ammunition.  Available with unified threads (1/2x28 for 9mm & .578x28 for 45 Auto) and left hand metric muzzle thread profiles (M13.5x1LH for 9mm & M16x1LH for 45 Auto) where applicable.  Each threaded barrel comes with a knurled thread protector cap. Big Book Catalog, Issue:69, Page:209

    HOT!
  • 1911 .460R CONVERSION KIT CLARK CUSTOM More Detail

    1911 .460R CONVERSION KIT CLARK CUSTOM

    Click here for price!$295.99Click here for price!$295.99

    Button rifled, drop-in barrel chambered for the .460 Rowland cartridge, turns the 1911 into a high performance, hunting pistol. Fitted with a match grade bushing that fits most slides tightly for excellent accuracy. Dual port comp controls recoil and muzzle flip. Includes Wolff 24 lb. recoil spring, extra power firing pin spring, full-length guide rod and recoil plug. 1911, Issue:11, Page:004 Big Book Catalog, Issue:69, Page:098 Sinclair, Issue:1A, Page:005

    HOT!
  • 1911 PRE-FIT BARREL KIT STORM LAKE More Detail

    1911 PRE-FIT BARREL KIT STORM LAKE

    Click here for price!$180.99 - $259.99Click here for price!$180.99 - $259.99

    Complete, Ready-To-Install With Little To No Fitting Required Save time and gain accuracy when re-barreling your 1911 Auto. Includes stainless steel or black isonite, match-grade barrel complete with prefitted bushing, link and pin that makes building an accurate pistol faster and easier. Locking lugs and barrel hood are sized to require little to no gunsmithing to fit most slides. .45ACP threaded models have .578-28 threads and 9mm models have 1/2"-28 threads. Government and Commander Model in .45 ACP and 9mm.  Officer available in .45 ACP only. Has Standard(non-ramped) barrel.   1911, Issue:11, Page:006 Big Book Catalog, Issue:69, Page:100 Sinclair, Issue:1A, Page:007

    HOT!
  • THREADED BARREL FOR GLOCK 43 ATI More Detail

    THREADED BARREL FOR GLOCK 43 ATI

    Click here for price!$159.99Click here for price!$159.99

    Match grade drop in threaded barrel with thread protector. Precision engineered CNC cut 416R stainless steel. Broach cut and finish honed. Drop in fit, no gunsmithing required. Billet thread protector included. Threaded 1/2-28, 1:10 right hand twist. Compatible with lead bullets. Match grade accuracy. “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.

    HOT!
  • S&W M&P PRE-FIT MATCH GRADE BARRELS STORM LAKE More Detail

    S&W M&P PRE-FIT MATCH GRADE BARRELS STORM LAKE

    Click here for price!$151.99 - $213.99Click here for price!$151.99 - $213.99

    Broach Cut Rifling For Optimum Accuracy With All Bullet TypesReady-to-install, match grade 416R stainless steel barrels with broach-cut rifling provide outstanding accuracy with both copper jacketed and lead bullets. CNC machined to precise tolerances, then hardened to Rc 40-42 for superior strength and durability. Chambered for maximum case support. Drop-in installation, may require minor modifications to fit certain models. Ported models are longer than factory barrel and have two ports on top, at the muzzle, to vent blast upward and counteract muzzle flip to help you get back on target faster. Threaded models are also longer than factory barrel and come pre-threaded to accept screw-on aftermarket compensators. Thread pitch is indicated in table; comes with a thread protector. .40 S&W-To-9mm Conversion barrel converts M&P Compact .40 S&W caliber pistols to shoot 9mm ammunition; 9mm extractor and ejector must be installed to ensure reliable shell ejection. .40 S&W-To-.357 SIG Conversion converts a full-size M&P .40 S&W pistol to shoot .357 SIG. Big Book Catalog, Issue:69, Page:211

    HOT!
  • BROWNING BUCK MARK TRAIL-LITE BARRELS TACTICAL SOLUTIONS, LLC More Detail

    BROWNING BUCK MARK TRAIL-LITE BARRELS TACTICAL SOLUTIONS, LLC

    Click here for price!$199.99 - $229.99Click here for price!$199.99 - $229.99

    Gives The Benefits Of A Bull Barrel Without The Extra WeightMachined aluminum replacement for factory barrel gives your Buck Mark the rigidity and thickness of a bull barrel for improved accuracy without the weight penalty. A button-rifled, chrome-moly steel liner helps ensure precise accuracy. Comes with target front sight installed, and pre-threaded muzzle to accept the Tactical Solutions compensator listed below or another ½"-28 tpi threaded muzzle accessory. Included thread protector gives the muzzle a clean, finished look when a compensator isn’t installed. Compensator - A large internal expansion chamber and 48 vent holes redirect muzzle blast to help control muzzle jump and recoil, so you can keep your Buck Mark’s sights on the target for fast follow up shots. Simply screws the Trail-Lite barrels and has the same O.D. as the barrel for a neat look.  Big Book Catalog, Issue:69, Page:211

    HOT!

Subscribe our newsletter

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Ex, velit!