• SBC SUPPRESSED BOLT CARRIER 5.56MM GEMTECH More Detail

    SBC SUPPRESSED BOLT CARRIER 5.56MM GEMTECH

    Click here for price!$239.99Click here for price!$239.99

    The GEMTECH Suppressed Bolt Carrier is a drop-in replacement and will allow the shooter to choose between suppressed (S) and unsuppressed (U) settings without any permanent modifications to the firearm. No longer will you need to change gas blocks, buffers, or any other components. Not only that, but with the GEMTECH Suppressed Bolt Carrier, there is a reduction in carrier speed and less felt recoil, bringing the cyclic rate of the suppressed rifle down to unsuppressed levels. And in some systems, testing has shown that it can actually bring it LOWER than unsuppressed levels. Reduce Bolt/Carrier speed while suppressed (S - setting) Unsuppressed velocity is unchanged (U - setting) from that of a normal bolt carrier Reduces Felt Recoil Reduces Blowback to shooters face Less wear and tear on weapon system 14.5in Colt M4 – 25% decrease in carrier velocity while suppressed. 10.5in Daniel Defense MK18 – 16% decrease in carrier velocity while suppressed.

    HOT!
  • 308 AR LOW MASS BOLT CARRIERS J P ENTERPRISES More Detail

    308 AR LOW MASS BOLT CARRIERS J P ENTERPRISES

    Click here for price!$256.99Click here for price!$256.99

    Reduced-weight bolt/carrier assembly helps tame felt recoil on a JP or DPMS or Remington AR-style .308 rifle (LR-308 pattern only). Carrier features the same type of weight-reducing cuts found on the original JPBC-3 AR-15 bolt carrier to give the same benefits your .308. Wide carrier rails have extra bearing surface to improve bolt alignment and reduce wear. Carrier key is already installed and staked. Available with QPQ or polished stainless finish. See SPECS for the Compatibility Notice. AR-15, Issue:11, Page:012 AR-15, Issue:11, Page:013 Big Book Catalog, Issue:69, Page:012

    HOT!
  • AR-15 STAINLESS STEEL LOW MASS BOLT CARRIER J P ENTERPRISES More Detail

    AR-15 STAINLESS STEEL LOW MASS BOLT CARRIER J P ENTERPRISES

    Click here for price!$214.99Click here for price!$214.99

    Custom, stainless steel bolt carrier features a 100% increase in bearing surface for smooth cycling and outstanding reliability. Includes forward assist serration and dust cover notch for tactical duty or any application requiring absolute “no-fail” operation. Expanded, exterior, bearing surfaces are hand polished and ensure precise alignment in upper receiver for less wear. Non-plated carrier bore is roller burnished for low-drag movement. Rear of carrier is designed in the AR-15, semi-auto configuration with longer, mil-spec cocking pad in the front. Five-step QPQ process produces an exceptionally hard, wear-resistant high-lubricity black finish. Comes with steel gas key installed. JP LMOS™ Bolt Carrier Small-Frame (.223) Stainless Steel Polished Finish Not for use in .308 AR-type rifles. AR-15, Issue:11, Page:013 Big Book Catalog, Issue:69, Page:012

    HOT!
  • AR-15/M16 ADJUSTABLE GAS KEY RUBBER CITY ARMORY More Detail

    AR-15/M16 ADJUSTABLE GAS KEY RUBBER CITY ARMORY

    Click here for price!$39.99Click here for price!$39.99

    The Rubber City Armory Adjustable Gas Key enhances performance of low mass and standard mass GI systems without unnecessary disassembly. Gas flow is adjusted and maintained at the carrier with 2 set screws, one to adjust gas flow and one to lock it in place.  Made from Pre-Hardened 4140: 28-32RC with radiused corners reducing sharp edges. 2 mounting bolts included.

    HOT!
  • AR-15 FULL MASS BOLT CARRIER ASSEMBLY J P ENTERPRISES More Detail

    AR-15 FULL MASS BOLT CARRIER ASSEMBLY J P ENTERPRISES

    Click here for price!$214.99Click here for price!$214.99

    HOT!
  • AR-15/M16 CARRIER GAS KEY DPMS More Detail

    AR-15/M16 CARRIER GAS KEY DPMS

    Click here for price!$13.99Click here for price!$13.99

    FITS: AR-15 - Common Parts, .223 AR-15, Issue:06, Page:095 Big Book Catalog, Issue:68, Page:604

    HOT!
  • AR-15 BOLT CARRIER ASSEMBLY HIGH STANDARD More Detail

    AR-15 BOLT CARRIER ASSEMBLY HIGH STANDARD

    Click here for price!$89.99Click here for price!$89.99

    FITS: AR-15, .223 AR-15 style with attached key, hard-chrome lined. AR-15, Issue:06, Page:096 Big Book Catalog, Issue:68, Page:620

    HOT!
  • AR-15/M16 ALUMINUM ULTRA LOW MASS CARRIER J P ENTERPRISES More Detail

    AR-15/M16 ALUMINUM ULTRA LOW MASS CARRIER J P ENTERPRISES

    Click here for price!$322.99Click here for price!$322.99

    Re-engineered for improved reliability and performance with lower maintenance requirements, the new JPBC-1 is the ultimate in improved reliability and performance, especially when combined with a high-efficiency JP muzzle brake, adjustable gas system and Silent Captured Spring. The end result is a carrier that leaves your .223 shooting like a rimfire .22. The JPBC-1 checks in at 2.9 ounces less than the 416 LMOS™ carrier and 0.7 ounces less than even the titanium carriers offered on the market today. Each unit comes as a complete kit including our JP precision-ground, one-piece gas ring as well as a titanium firing pin. Run in concert, this gas ring ensures perfect bore-to-gas seal fitment in the JPBC-1 and minimized friction to enhance reliability when fouled while the titanium firing pin eliminates any possibility of slamfire at the higher bolt velocities.

    HOT!
  • CARRIER ASSEMBLY, NEW STYLE MARLIN More Detail

    CARRIER ASSEMBLY, NEW STYLE MARLIN

    Click here for price!$74.99Click here for price!$74.99

    FITS: 1894, .44 Mag; 1894CB, .44 Mag, .45 LC; 1894P, .44 Mag Big Book Catalog, Issue:68, Page:622 Big Book Catalog, Issue:68, Page:623

    HOT!
  • AR-15 .22LR BOLT CARRIER GROUP STAINLESS STEEL CMMG More Detail

    AR-15 .22LR BOLT CARRIER GROUP STAINLESS STEEL CMMG

    Click here for price!$216.80Click here for price!$216.80

    Designed to work with all CMMG .22LR barrels. Made from Stainless Steel.

    HOT!
  • AR-15 STRIPPED BOLT CARRIER DPMS More Detail

    AR-15 STRIPPED BOLT CARRIER DPMS

    Click here for price!$57.99Click here for price!$57.99

    FITS: AR-15 - Common Parts, .223 AR-15, Issue:06, Page:095 Big Book Catalog, Issue:68, Page:604 Sinclair, Issue:4B, Page:223

    HOT!
  • M16 CHROME MATCH BOLT CARRIER ASSEMBLY SMITH ENTERPRISE More Detail

    M16 CHROME MATCH BOLT CARRIER ASSEMBLY SMITH ENTERPRISE

    Click here for price!$174.99Click here for price!$174.99

    True, match-spec bolt carriers increase cycling efficiency for greater dependability and less chance of malfunction. Machined to military specs, hardened and heat treated, then hard-chrome plated for a much lower co-efficient of friction between the upper receiver and carrier. Inside surfaces of bolt recess are polished and also hard-chromed for a better gas seal and less carbon build-up. Includes hard-chromed gas key and stainless steel screws. AR-15, Issue:09, Page:011 Big Book Catalog, Issue:67, Page:012

    HOT!
  • AR 308 VMOS BOLT CARRIERS BLACK J P ENTERPRISES More Detail

    AR 308 VMOS BOLT CARRIERS BLACK J P ENTERPRISES

    Click here for price!$303.95 - $351.45Click here for price!$303.95 - $351.45

    Features: Enhanced tunability of operating system Guaranteed reliability of difficult configurations Overcomes all fouling build-up Roller-burnished bore for frictionless operation Rock-hard QPQ finish provides remarkable natural lubricity Extremely smooth cycling with proper lubrication Increased bearing surfaces for slower wear and longer component life Longer cocking pad for optimal reliability American made Compatibility: The large-frame VMOS™ carrier uses the same steel and tungsten weights as GEN 2 Silent Captured Spring units. Only the forward two masses are reconfigurable. The rear-most steel mass cannot be exchanged. This carrier will not cycle with a standard buffer retainer plunger installed. Standard buffer/spring components must be installed “loose” or replaced with a Silent Captured Spring. This notice pertains to any rifle based on the large-format AR-10-type or LR-308 platform typically chambered in .308 Winchester, 7.62x51 NATO or other cartridges requiring the longer magazine format. Be aware that these receiver platforms are not standardized like the AR-15/M16 platform for which most parts are cross-compatible. Before ordering accessories and parts for your large-format rifle, make sure the parts are compatible with your particular platform. This bolt carrier is compatible only with the DPMS family of AR-10 products. With the Armalite/Rock River family of large-frame receivers, this carrier can only be used as a complete bolt carrier assembly group with a DPMS-pattern bolt such as our .308 JP EnhancedBolt. Interchanging individual components will result in an unsafe configuration. Do Not under any circumstances mix and match components between the platforms.

    HOT!
  • AR-15/M16 BOLT CARRIER KEY SCREW DPMS More Detail

    AR-15/M16 BOLT CARRIER KEY SCREW DPMS

    Click here for price!$1.99Click here for price!$1.99

    FITS: AR-15 - Common Parts, .223 AR-15, Issue:06, Page:095 Big Book Catalog, Issue:68, Page:604

    HOT!
  • BOLT CARRIER COLT More Detail

    BOLT CARRIER COLT

    Click here for price!$135.99Click here for price!$135.99

    Factory Replacement Parts For Military & Law Enforcement Applications Factory original, fire control parts keep your select-fire Colt M16/M4 shooting reliably, so you’ll be prepared to face intensive tactical operations with the confidence of knowing your weapon won’t let you down. These parts are precision engineered and manufactured to strict quality control standards from the finest materials for correct fit in your gun. AR-15, Issue:11, Page:041 Big Book Catalog, Issue:69, Page:039

    HOT!
  • AR-15 LOW MASS BOLT CARRIER ASSEMBLY J P ENTERPRISES More Detail

    AR-15 LOW MASS BOLT CARRIER ASSEMBLY J P ENTERPRISES

    Click here for price!$214.99Click here for price!$214.99

    Reduces Reciprocating Mass To Soften RecoilLightweight, stainless steel bolt carrier has significantly lower reciprocating mass than a standard mil-spec carrier for softer recoil impulse on competition rifles. Helps limit felt recoil to get you back on target for fast follow-up shots. Lightening cuts reduce weight without sacrificing strength, and the forward assist serrations have been omitted for competition use. Extra-wide carrier rails have extra bearing surface to improve bolt alignment and reduce wear. Comes with carrier key installed and staked, and features a dust cover notch. For best performance and to minimize impact wear, use only in rifles with J.P. Low-Mass Recoil Buffer, Speed Hammer, and Reduced-Power Spring Kit, all available separately AR-15, Issue:11, Page:013 Big Book Catalog, Issue:69, Page:012

    HOT!
  • MP5 LOCKING PIECE, 100DEG., MP5, HECKLER & KOCH More Detail

    MP5 LOCKING PIECE, 100DEG., MP5, HECKLER & KOCH

    Click here for price!$73.99Click here for price!$73.99

    FITS: MP5

    HOT!
  • M16 LOW MASS BOLT CARRIER WITH INTEGRAL GAS KEY VOODOO INNOVATIONS More Detail

    M16 LOW MASS BOLT CARRIER WITH INTEGRAL GAS KEY VOODOO INNOVATIONS

    Click here for price!$131.70Click here for price!$131.70

    Weighs 20% Less Than A Standard Bolt Carrier Designed to help keep the weight of your rifle down, this direct impingent bolt carrier is compatible with both Mil-Spec and non Mil-Spec upper receivers. Whether you are shooting light or heavy ammo, carrier can be adjusted to give you the best performance possible. Integrally machined gas key removes any chance of key loosening during firing. Improved gas flow eliminates carbon build up which can cause your carrier to freeze. Maximized carrier key dimension reduces gas tube contact wear. Carrier offers reduced recoil, allowing you quicker target acquisition and follow up shots. Durable LifeCoat finish delivers superior lubricity, with resistance to both corrosion and carbon. AR-15, Issue:11, Page:013 Big Book Catalog, Issue:69, Page:012

    HOT!
  • CARRIER SCREW MARLIN More Detail

    CARRIER SCREW MARLIN

    Click here for price!$3.99Click here for price!$3.99

    FITS: 1894, .44 Mag; 1894C, .38/.357; 1894CB, .45 LC, .357 Mag, .44 Mag; 1894CBC, .38 Spl; 1894CP, .357 Mag; 1894P, .44 Mag; 1895, .45-70; 1895CB, .45-70; 1895G, .45-70; 1895M, .450; 1895MR, .450; 30AS/AW, .30-30; 336A, .30-30; 336C, .35 Re Big Book Catalog, Issue:68, Page:622 Big Book Catalog, Issue:68, Page:623 Big Book Catalog, Issue:68, Page:624 Big Book Catalog, Issue:68, Page:625 Big Book Catalog, Issue:68, Page:626 Big Book Catalog, Issue:68, Page:627

    HOT!
  • CARRIER ASSEMBLY MARLIN More Detail

    CARRIER ASSEMBLY MARLIN

    Click here for price!$72.99Click here for price!$72.99

    FITS: 30AS/AW, .30-30; 336A, .30-30; 336C, .35 Rem, .30-30; 336CB, .38-55; 336CC, .30-30; 336W, .30-30; 336Y, .30-30 Big Book Catalog, Issue:68, Page:625 Big Book Catalog, Issue:68, Page:626 Big Book Catalog, Issue:68, Page:627

    HOT!
  • BOLT CARRIER KEY SCREW HIGH STANDARD More Detail

    BOLT CARRIER KEY SCREW HIGH STANDARD

    Click here for price!$1.58Click here for price!$1.58

    FITS: AR-15 - Common Parts, .223 AR-15, Issue:06, Page:096 Big Book Catalog, Issue:68, Page:620

    HOT!
  • MP5 CARRIER, BOLTHEAD, MP5K, 9MM HECKLER & KOCH More Detail

    MP5 CARRIER, BOLTHEAD, MP5K, 9MM HECKLER & KOCH

    Click here for price!$334.99Click here for price!$334.99

    FITS: MP5 Big Book Catalog, Issue:68, Page:616

    HOT!
  • M16 LIFECOAT INTEGRAL BOLT CARRIER VOODOO INNOVATIONS More Detail

    M16 LIFECOAT INTEGRAL BOLT CARRIER VOODOO INNOVATIONS

    Click here for price!$108.99Click here for price!$108.99

    VDI direct impingement full auto rated bolt carriers are compatible with mil-spec and non mil-sped upper receivers and associated components. This bolt carrier is machined to meet all MIL TDP specifications and is enhanced using LifeCoat treatment providing superior: Durability Lubricity Corrosive Resistance Carbon Resistance Our new Integral D.I. Carrier was designed from conception to improve the service life and durability of the direct impingement carrier. The VDI Integral DI Carrier eliminates the potential for carrier to key separation due to carrier key screws stripping, fracturing, or becoming un-staked. The new Integral carrier has a improved gas flow path with no obstructions or shelves for carbon to deposit and build on eliminating the potential for gas obstruction to seize the operation of your carrier.

    HOT!
  • AR6951 BOLT KEY COLT More Detail

    AR6951 BOLT KEY COLT

    Click here for price!$21.99Click here for price!$21.99

    FITS: AR-15 Carbine, 9mm; AR-15 Match Target Lightweight, 9mm AR-15, Issue:06, Page:092 AR-15, Issue:06, Page:094 Big Book Catalog, Issue:68, Page:602 Big Book Catalog, Issue:68, Page:604

    HOT!

Subscribe our newsletter

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Ex, velit!