• AR-15 STOCK ASSY COLLAPSIBLE MIL-SPEC BROWNELLS More Detail

    AR-15 STOCK ASSY COLLAPSIBLE MIL-SPEC BROWNELLS

    Click here for price!$59.99Click here for price!$59.99

    Collapsible buttstock similar to the current US GI M4 carbine stock provides convenient six-position length-of-pull adjustment to fit different-size shooters, including those wearing body armor. Ready to install on any standard AR-15 rifle or carbine lower receiver; includes buffer tube, receiver lock plate, lock nut, toe-mounted steel sling loop, carbine recoil spring and buffer. Buttstock is made from extremely tough, fiberglass-reinforced, injection-molded nylon to resist impact, heat, moisture, extreme cold, and most cleaning solvents. Steel lock nut has four square notches and pre-cut detents for staking to lock plate. Available with Mil-Spec (nominal 1.14" O.D.) receiver extension tube. Stock interior diameter is matched to buffer tube O.D. for a snug fit that eliminates un wanted play and rattles. AR-15, Issue:11, Page:042 Big Book Catalog, Issue:69, Page:041

    HOT!
  • AR-15 PRS GEN3 PRECISION STOCK ADJUSTABLE RIFLE LENGTH MAGPUL More Detail

    AR-15 PRS GEN3 PRECISION STOCK ADJUSTABLE RIFLE LENGTH MAGPUL

    Click here for price!$242.20Click here for price!$242.20

    The PRS GEN3 is a field precision stock for AR15/M16 and AR10/SR25 platforms, featuring tool-less length of pull and cheek piece height adjustment. Adjustable for length of pull and cheek piece height via aluminum detent knobs, the PRS GEN3 (Precision Rifle/Sniper) stock is intended for semi automatic sniper or varmint type rifles. It installs on rifle-length receiver extensions as well as mil-spec and A5 length carbine receiver extensions and includes a cant/height-adjustable rubber butt-pad and rotation-limiting QD sling cups as well as M-LOK slots on the bottom for rear monopod mounting.   Big Book Catalog, Issue:69, Page:045

    HOT!
  • AR-15 CTR STOCK COLLAPSIBLE MIL-SPEC MAGPUL More Detail

    AR-15 CTR STOCK COLLAPSIBLE MIL-SPEC MAGPUL

    Click here for price!$56.95Click here for price!$56.95

    Locking System Eliminates "Play" Features a friction locking mechanism that eliminates movement between the buffer tube and buttstock for a solid “feel” when mounting rifle to shoulder. Heavy duty, spring-loaded hand lever allows fast length-of-pull adjustments. Nylon polymer body provides maximum impact and heat resistance, with molded-in reinforcements at stress points. Accepts a variety of ambidextrous sling attachment options, including web slings and single-point, push-button sling mounts. Comb contour is wider than standard issue M4 stock to help shooter maintain a solid cheekweld. Synthetic rubber buttpad increases comfort and helps prevent slippage. Fits buffer tubes that accept both four- and six-position collapsible stocks. Buffer tube, carbine buffer, receiver extension nut, and carbine-length action spring not included. Available in Black, Dark Earth, and O.D. Green, so you can match the color of your stock to your tactical rifle's color scheme. Mil-Spec fits smaller 1.14" O.D. buffer tubes on Colt-manufactured M4 and similar mil-spec carbines. AR-15, Issue:11, Page:045 Big Book Catalog, Issue:69, Page:044

    HOT!
  • AR-15 BATTLELINK MINIMALIST STOCK COLLAPSIBLE MIL-SPEC MISSION FIRST TACTICAL, LLC More Detail

    AR-15 BATTLELINK MINIMALIST STOCK COLLAPSIBLE MIL-SPEC MISSION FIRST TACTICAL, LLC

    Click here for price!$49.99Click here for price!$49.99

    Battlelink Stocks are the evolution of battlefield technology manufactured using a specially developed Military Grade reinforced, super tough polyamide.  The Battlelink Minimalist has been designed to be one of the lightest on the market, coming in at right around 6oz. Holding true to the basics, while adding functionality with the minimal amount of material possible was our goal. This stock adapts and changes to your environment or operational needs by utilizing custom accessory mounts and is able to accept an optimized sling configuration. This ultimately makes our stock the lightest in today's AR accessories market.

    HOT!
  • KAK SHOCKWAVE PISTOL BRACE & LAW TACTICAL FOLDING STOCK ADAPTER BROWNELLS More Detail

    KAK SHOCKWAVE PISTOL BRACE & LAW TACTICAL FOLDING STOCK ADAPTER BROWNELLS

    Click here for price!$364.99Click here for price!$364.99

    Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). No special receiver extension needed. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation. Law Tactical's steel adapter enables installation of a folding stock on any AR-15 to create a smaller-profile rifle for easy deployment from a vehicle or transport in non-permissive environments. Works with standard gas impingement OR gas piston system. Accepts A2, mil-spec M4-style, and commercial carbine receiver extension tube and almost any stock that fits them. Compatible with all standard bolt carrier groups, including full-auto and .308 size. Single-button operation for quick folding and unfolding and steel locking latch keeps stock securely in place when extended. Gen3-M has a lowered hinge to avoid interference when charging the weapon, and a setscrew keeps the adapter securely affixed to the receiver. Hinge tension is adjustable so you can choose how stiff the folding mechanism is. Includes special bolt carrier extension (no tools to install/remove). Current version utilizes standard buffer retaining pin and spring. Stock adapter features DLC coating. INCLUDES Shockwave Blade Pistol Stabilizer-Black KAK Shockwave Tube Castle Nut MIL-Spec Endplate Carbine Buffer Spring Standard Carbine Buffer Law Tactical Folding Stock Adapter  

    HOT!
  • AR-15 MODULAR STOCK ASSY FIXED RIFLE LENGTH BROWNELLS More Detail

    AR-15 MODULAR STOCK ASSY FIXED RIFLE LENGTH BROWNELLS

    Click here for price!$149.99Click here for price!$149.99

    The Luth-AR Stock Kits from Brownells combine your choice of the modular or skeleton buttstocks with all necessary hardware to mount to your lower receiver. In addition to the stock this kit includes the buttstock extension tube, rifle buffer spring, and a standard buffer body assembly. The Luth-AR Buttsock Assemblies fit all AR-15 rifles.  These stocks easily replace existing A2 or A1 stock assemblies, and attach to a rifle length buffer extension tube.  The MBA-1 (Modular Buttstock Assembly) is fully adjustable for length of pull via its butt plate.  Cheek rest allows for an extra 1" of height and the rear allows for 1-1/16" of length of pull adjustment.  Total weight of the MBA is 1.26 lbs, while the Skeleton Stock weighs in at 0.7 lbs.  Both stocks are constructed from glass filled nylon, for superior durability.  Overall length for each stock is 10-3/8" and the MBA can extend out to 11.5".  Sold Separately: Uncle Mike's QD Sockets can be epoxied into socket on the side of each stock, use part# 593-000-038.

    HOT!
  • AR-15 FINGER GROOVER GRIP W/COLLIPSIBLE MIL-SPEC BUTTSTOCK HOGUE More Detail

    AR-15 FINGER GROOVER GRIP W/COLLIPSIBLE MIL-SPEC BUTTSTOCK HOGUE

    Click here for price!$59.46 - $67.96Click here for price!$59.46 - $67.96

    Hogue’s 2 Piece Kit contains a finger grooved beavertail rubber grip and a collapsible buttstock. The beavertail grip is specifically designed to retain the important lines and aesthetics of tactical rifles. It provides a comfortable grip with palm swells and and features Hogue’s exclusive Cobblestone™ pattern. Hogue’s OverMolded® collapsible buttstock features reinforced polymer construction with a rubber cheek rest and a rubber/polymer hybrid butt pad that provides snag-free shouldering. This unique design creates a snug anti-rattle friction fit that prevents unwanted movement along the buffer tube. The buttstock provides multiple swivel sleeve and sling mounting locations. Fits Mil-Spec buffer tubes.

    HOT!
  • AR-15 MOE STOCK COLLAPSIBLE MIL-SPEC MAGPUL More Detail

    AR-15 MOE STOCK COLLAPSIBLE MIL-SPEC MAGPUL

    Click here for price!$37.95Click here for price!$37.95

    Economical, Drop-In Upgrade For Carbine Collapsible Stock Magpul Original Equipment (MOE) carbine buttstock provides the quality, durability, and ergonomic benefits of Magpul’s CTR stock in a rugged, economical, drop-in package. Strong, A-frame design is lightweight and comfortable, yet provides operator with plenty of support. Comb contour is wider than standard issue M4 stock to help shooter maintain a solid, consistent cheekweld. Streamlined exterior and protected release lever won’t snag on clothing, gear, vehicle interior, or vegetation. Heavy duty, spring-loaded release lever allows fast length-of-pull adjustments and won’t dig into your hand. Impact- and heat-resistant, polymer construction includes molded-in reinforcements at stress points, plus two slots for web slings and a hole for a toe-mounted sling swivel or clip-on sling. Soft, synthetic rubber buttpad increases comfort and helps prevent slippage. Mil-Spec fits 1.14" O.D. buffer tubes on Colt-manufactured M4 and similar mil-spec tubes that accept both four- and six-position collapsible stocks. AR-15, Issue:11, Page:044 Big Book Catalog, Issue:69, Page:042

    HOT!
  • AR-15 MODULAR STOCK ASSY FIXED RIFLE LENGTH LUTH-AR LLC More Detail

    AR-15 MODULAR STOCK ASSY FIXED RIFLE LENGTH LUTH-AR LLC

    Click here for price!$139.99 - $149.99Click here for price!$139.99 - $149.99

    Stocks Add Adjustment & Extra Features To Rifles Glass-filled nylon rifle stocks fit onto standard A1/A2 buffer tubes and add adjustments and extra features to AR-15 rifles, including most .308 models. Stocks feature textured rubber recoil pads and 2 QD sling sockets for fast sling mounting and dismounting. Modular Stock gives an adjustable cheek rest, and adjustable length of pull. Weighs less compared to other adjustable stocks. Skeleton Stock has futuristic appearance, and helps reduce weight. Will not fit on carbine buffer tubes. Includes Allen wrench for mounting. Sold Separately: Uncle Mike's QD Sockets can be epoxied into socket on the side of each stock, use part# 593-000-038. AR-15, Issue:11, Page:043 Big Book Catalog, Issue:69, Page:043

    HOT!
  • AR-15 ACS STOCK COLLAPSIBLE MIL-SPEC MAGPUL More Detail

    AR-15 ACS STOCK COLLAPSIBLE MIL-SPEC MAGPUL

    Click here for price!$85.45Click here for price!$85.45

    Drop-In Replacement For M4 Stock With Storage & Enhanced Comfort Features Adaptable Carbine/Storage (ACS) stock is a drop-in replacement for standard USGI M4 collapsible stock that gives the tactical operator extra storage options, a secure, comfortable cheekweld, and an advanced dual-locking lever. Smooth, streamlined exterior contours prevent snagging on clothing, sling, or vegetation, and help ensure fast exits from vehicles without snagging on gear. Removable battery storage compartments run the full length of the extra-wide comb and hold 2 AA or 3 CR-123 batteries, while providing a wide, contoured area for an exceptionally solid, comfortable cheekweld. Secure molded rubber caps keep water and dust out of compartments and face the rear of the stock for easy removal; cap exterior is beveled to resist snagging when shouldering weapon. Positive-locking trapdoor on right side of the stock reveals a roomy storage compartment for additional batteries, coiled up cleaning cable and other cleaning supplies, ear plugs, spare parts, or other small items. Magpul’s dual locking system uses an additional cam lever to protect the release lever from accidental operation, yet still allows you to adjust length of pull by simply pushing on the release lever. Slot molded in the toe provides an attachment point for a 1¼" wide sling. Also includes the same detachable rubber buttpad found on Magpul CTR and UBR buttstocks to help keep stock firmly mounted on shoulder. Mil-Spec fits 1.14" O.D. buffer tubes on Colt-manufactured M4 and similar mil-spec tubes that accept both four- and six-position collapsible stocks. AR-15, Issue:11, Page:045 Big Book Catalog, Issue:69, Page:045

    HOT!
  • AR-15 MOE STOCK ASSY  FIXED RIFLE LENGTH BROWNELLS More Detail

    AR-15 MOE STOCK ASSY FIXED RIFLE LENGTH BROWNELLS

    Click here for price!$109.99Click here for price!$109.99

    MOE Rifle Stock and Components needed to get your lower receiver up and running  with the new stock. Kit includes MOE Rifle Stock, rifle buffer, buffer spring and rifle extension tube. The MOE Rifle Stock is a simple, lightweight, cost-effective stock for the AR-15/M16 platforms, with an enhanced cheekweld, rubberized butt-pad, and internal storage compartment. The MOE Rifle Stock is a drop-in replacement for A1 and A2 rifle stocks utilizing the standard rifle-length receiver extension (buffer tube) without the A2 spacer. Designed as a basic rifle upgrade, the stock features an integral 1.25” sling loop, optional dual-side front and rear QD mounting points, replaceable anti-slip rubberized butt-pad, and internal storage compartment accessible through the rear storage door. Fixed Length for Rifle length buffer tubes Shorter LOP than A2 Stock Durable polymer construction Integrated storage compartment Integrated Footman’s Loop and QD Cup attachment points Hand Hook for off-hand stabilization when shooting prone Compatible with Magpul PRS Butt Pads & Polymer Rail Sections for Monopod mounting AR-15, Issue:11, Page:044 Big Book Catalog, Issue:69, Page:042

    HOT!
  • AR-15 ARFX SKELETON STOCK DOUBLE STAR More Detail

    AR-15 ARFX SKELETON STOCK DOUBLE STAR

    Click here for price!$89.99 - $106.99Click here for price!$89.99 - $106.99

    Light & Strong For Fast Handling In Extreme Environments Multiple sling points are but one of the many features that make this lightweight, aluminum stock ideal for competition and tactical use. Supplied with an Uncle Mike’s 1.25" sling swivel and stud. A lightweight, fast handling stock for sporting, tactical and competition use. Gives three sling attachment points. Uses your existing A-2 fixed stock buffer tube as the top tube to keep weight to a minimum. Closed-cell, foam over-tube provides a soft, comfortable cheek weld, plus insulates your face from vibration and inclement weather. Over-tube is formulated to withstand cleaning solvents and gun oils, UV radiation, freezing temperatures, salt water and rough handling. Machined aluminum buttplate is drilled and tapped for rubber Butt Pad (included). Installation requires A-2 buffer tube, rifle buffer, and rifle buffer spring. AR-15, Issue:11, Page:043 Big Book Catalog, Issue:69, Page:041

    HOT!
  • AR-15 STR STOCK COLLAPSIBLE MIL-SPEC MAGPUL More Detail

    AR-15 STR STOCK COLLAPSIBLE MIL-SPEC MAGPUL

    Click here for price!$75.95Click here for price!$75.95

    Adjustable Carbine Stock With Internal Battery Storage An enhanced version of the Magpul CTR® stock, the STR (“Storage/Type Restricted”) buttstock features two 4¼" left- and right-side positioned battery storage tubes and a wider cheekweld for extra comfort. Rubber caps at the rear keep the storage compartments resistant to water incursion, yet pop off easily for access to two AA or two CR-123 batteries inside. Features two integral 1¼" sling loops. Includes reversible QD swivel socket. Friction locking mechanism minimizes wobble between the buffer tube and the buttstock for a solid, secure "feel", which is enhanced by the detachable .30" thick rubber rubber that adds plenty of "grab" to prevent shoulder slippage. AR-15, Issue:11, Page:046 Big Book Catalog, Issue:69, Page:044

    HOT!
  • AR-15 FRS-15 STOCK ASSY FIXED CARBINE LENGTH THORDSEN CUSTOMS LLC More Detail

    AR-15 FRS-15 STOCK ASSY FIXED CARBINE LENGTH THORDSEN CUSTOMS LLC

    Click here for price!$139.99Click here for price!$139.99

    The FRS-15 Stock and Buffer Tube Covers allow for the AR-15 enthusiast to comply with State regulations, while still maintaining a functional rifle.  The tradtiional stock contour will suit most shooters, and the checkered grip will ensure a consistent hold.  The FRS-15 stock also features multiple sling hardpoints and compatibility with stanard M4 recoil pads.  The stockcomes with a buffer tube cover.   Which has the option for the inclusion of QD sling mounts.  The cover also accepts some M4 cheek risers, such as 100-012-476.  For residents of States with restrictions, replacement of the pistol grip and stock with these parts eliminates two prohibited characteristics or features that define an "Assault Weapon".  Other restricitons may apply in your area, so please check with local laws prior to installation.  Some regulations may require permanent attachment of the stock. Laws and regulations can change at any time; the user is responsible for making sure his rifle stays compliant.

    HOT!
  • AK-47 ZHUKOV-S STOCK FOLDING MAGPUL More Detail

    AK-47 ZHUKOV-S STOCK FOLDING MAGPUL

    Click here for price!$94.95Click here for price!$94.95

    The Magpul Zhukov-S Stock is a no-compromise folding stock for the modern AK. The Zhukov-S Stock casts aside traditional AK stock shortcomings and offers a folding, collapsible stock with QD sling mounts, modular Cheek Risers (sold separately), 5-position telescoping and a shock-absorbing rubber butt-pad for superior traction. The Zhukov has right-side folding for compatibility with side-mounted optics. Designed to fit most common stamped AK receivers without modification via a unique wedge block, the durable injection molded polymer Zhukov-S Stock redefines the human interface with the AK platform. Does not fit milled or Yugo AK's. Big Book Catalog, Issue:69, Page:188

    HOT!
  • AR-15 ENHANCED SOPMOD STOCK COLLAPSIBLE MIL-SPEC B5 SYSTEMS More Detail

    AR-15 ENHANCED SOPMOD STOCK COLLAPSIBLE MIL-SPEC B5 SYSTEMS

    Click here for price!$95.00 - $110.00Click here for price!$95.00 - $110.00

    Improves Cheekweld & Provides Waterproof Storage For Small Items Currently employed by the U.S. military, this reinforced polymer stock fits M4-type receiver extensions and offers an improved cheekweld designed for increased comfort and consistency. Two waterproof storage compartments running the length of the stock hold 2 AA or 3 CR-123 batteries. Streamlined contours resist snagging on clothing, equipment, or vegetation to aid in safe and stealthy operation. Sure-Grip stock latch ensures convenient and intuitive length-of-pull adjustment, while the anti-slip rubber recoil pad secures the weapon to the operator’s shoulder. Features a black, stainless steel QD swivel mount and two molded 1¼" wide sling slots.   AR-15, Issue:11, Page:047 Big Book Catalog, Issue:69, Page:046

    HOT!
  • AR-15 MOE-SL STOCK COLLAPSIBLE MIL-SPEC MAGPUL More Detail

    AR-15 MOE-SL STOCK COLLAPSIBLE MIL-SPEC MAGPUL

    Click here for price!$56.95Click here for price!$56.95

    Optimized For Use With Body Armor & Modular Gear Direct replacement buttstock for AR-15/M16 carbines is designed to withstand the rigors of the modern battlefield. Slim stock features a sloping cheek weld for a firm fit and improved user comfort. The dual side latch release provides easy adjustments and is set up out of the way to remain snag free. Premium chrome-silicon locking spring ensures a positive long on the receiver extension tube and long service life for the stock. Internal anti-rattle feature provides a snug fit to minimize wobble on the receiver extension tube. Rolled toe and angular butt plate allows for easier shoulder transitions and better fit when using body armor. Non-slip rubber butt-pad helps keep the carbine on your shoulder and increases recoil absorption. Two sling mounts allow you to utilize different mounting options. AR-15, Issue:11, Page:044 Big Book Catalog, Issue:69, Page:043

    HOT!
  • AR-15 ACS-L STOCK COLLAPSIBLE MIL-SPEC MAGPUL More Detail

    AR-15 ACS-L STOCK COLLAPSIBLE MIL-SPEC MAGPUL

    Click here for price!$75.95Click here for price!$75.95

    Extra-Slim Profile For Added Maneuverability The Adaptable Carbine Stock-Light (ACS-L) is a slimmed-down, lightweight, version of Magpul’s popular ACS stock. The ACS-L provides extra maneuverability by eliminating the ACS’s side storage compartments, while retaining the wide, sloping top for a secure, comfortable cheekweld. Also retained is the storage compartment in the tail of the stock, and the friction locking system that prevents unwanted wobble after extending the stock. Includes a reversible socket for QD pushbutton sling swivels and a 1" sling loop molded in the toe of the stock. The .3" thick rubber recoil pad can be replaced by Magpul Tactical Recoil Pads (sold separately). Models available to fit Mil-Spec (1.14" O.D.) carbine buffer tubes. Buffer tube, carbine buffer, receiver extension nut, and carbine-length action spring not included. AR-15, Issue:11, Page:045 Big Book Catalog, Issue:69, Page:044

    HOT!
  • AR-15 MOE STOCK ASSY  COLLAPSIBLE MIL-SPEC BROWNELLS More Detail

    AR-15 MOE STOCK ASSY COLLAPSIBLE MIL-SPEC BROWNELLS

    Click here for price!$69.99Click here for price!$69.99

    Magpul Original Equipment (MOE) carbine buttstock provides the quality, durability, and ergonomic benefits of Magpul’s CTR stock in a rugged, economical, drop-in package. Strong, A-frame design is lightweight and comfortable, yet provides operator with plenty of support. Comb contour is wider than standard issue M4 stock to help shooter maintain a solid, consistent cheekweld. Streamlined exterior and protected release lever won’t snag on clothing, gear, vehicle interior, or vegetation. Heavy duty, spring-loaded release lever allows fast length-of-pull adjustments and won’t dig into your hand. Impact- and heat-resistant, polymer construction includes molded-in reinforcements at stress points, plus two slots for web slings and a hole for a toe-mounted sling swivel or clip-on sling. Soft, synthetic rubber buttpad increases comfort and helps prevent slippage. Available in Black, Dark Earth, and O.D. Green. The MOE Carbine Buttstock Kit includes the following items: Mil-Spec Buffer Tube Carbine Buffer Chrome Silicone M-4 Recoil Spring Receiver End Plate Receiver Extension Castle Nut AR-15, Issue:11, Page:044 Big Book Catalog, Issue:69, Page:043

    HOT!
  • AR-15 CTR STOCK ASSY COLLAPSIBLE MIL-SPEC BROWNELLS More Detail

    AR-15 CTR STOCK ASSY COLLAPSIBLE MIL-SPEC BROWNELLS

    Click here for price!$94.99 - $109.99Click here for price!$94.99 - $109.99

    Brownells offers this kit that contains both the Magpul CTR buttstock and all mounting hardwear needed for an easy installation. Includes CTR buttstock, Mil-Spec buffer tube, carbine buffer, chrome silicon recoil spring, receiver end plate and castle nut. Features a friction locking mechanism that eliminates movement between the buffer tube and buttstock for a solid “feel” when mounting rifle to shoulder. Heavy duty, spring-loaded hand lever allows fast length-of-pull adjustments. Nylon polymer body provides maximum impact and heat resistance, with molded-in reinforcements at stress points. Accepts a variety of ambidextrous sling attachment options, including web slings and single-point, push-button sling mounts. Comb contour is wider than standard issue M4 stock to help shooter maintain a solid cheekweld. Synthetic rubber buttpad increases comfort and helps prevent slippage. Fits buffer tubes that accept both four- and six-position collapsible stocks. Available in Black, Dark Earth, Gray and O.D. Green, so you can match the color of your stock to your tactical rifle's color scheme. Mil-Spec fits smaller 1.14" O.D. buffer tubes on Colt-manufactured M4 and similar mil-spec carbines. AR-15, Issue:11, Page:045 Big Book Catalog, Issue:69, Page:044

    HOT!
  • AR-15 FRS-15 STOCK ASSY QUICK DETACH CARBINE LENGTH THORDSEN CUSTOMS LLC More Detail

    AR-15 FRS-15 STOCK ASSY QUICK DETACH CARBINE LENGTH THORDSEN CUSTOMS LLC

    Click here for price!$149.99Click here for price!$149.99

    The FRS-15 Stock and Buffer Tube Covers allow for the AR-15 enthusiast to comply with State regulations, while still maintaining a functional rifle.  The tradtiional stock contour will suit most shooters, and the checkered grip will ensure a consistent hold.  The FRS-15 stock also features multiple sling hardpoints and compatibility with stanard M4 recoil pads.  The stockcomes with a buffer tube cover.   Which has the option for the inclusion of QD sling mounts.  The cover also accepts some M4 cheek risers, such as 100-012-476.  For residents of States with restrictions, replacement of the pistol grip and stock with these parts eliminates two prohibited characteristics or features that define an "Assault Weapon".  Other restricitons may apply in your area, so please check with local laws prior to installation.  Some regulations may require permanent attachment of the stock. Laws and regulations can change at any time; the user is responsible for making sure his rifle stays compliant.

    HOT!
  • AR-15 STOCK COLLAPSIBLE MIL-SPEC DANIEL DEFENSE More Detail

    AR-15 STOCK COLLAPSIBLE MIL-SPEC DANIEL DEFENSE

    Click here for price!$66.00Click here for price!$66.00

    The Daniel Defense Collapsible Buttstocks feature an enhanced cheekweld with a soft rubber overmolding.  Limited rotation QD sockets on each side of the stock, allow for fast attachment of slings.  Stock are available in black or Daniel Defense’s Milspec+ Brown.  Stocks fit Mil-Spec buffer tubes and are adjustable. AR-15, Issue:11, Page:043 Big Book Catalog, Issue:69, Page:041

    HOT!
  • AR-15 CTR STOCK COLLAPSIBLE COMMERCIAL MAGPUL More Detail

    AR-15 CTR STOCK COLLAPSIBLE COMMERCIAL MAGPUL

    Click here for price!$56.95Click here for price!$56.95

    Features a friction locking mechanism that eliminates movement between the buffer tube and buttstock for a solid “feel” when mounting rifle to shoulder. Heavy duty, spring-loaded hand lever allows fast length-of-pull adjustments. Nylon polymer body provides maximum impact and heat resistance, with molded-in reinforcements at stress points. Accepts a variety of ambidextrous sling attachment options, including web slings and single-point, push-button sling mounts. Comb contour is wider than standard issue M4 stock to help shooter maintain a solid cheekweld. Synthetic rubber buttpad increases comfort and helps prevent slippage. Fits buffer tubes that accept both four- and six-position collapsible stocks. Buffer tube, carbine buffer, receiver extension nut, and carbine-length action spring not included. Available in Black, O.D. Green or Gray, so you can match the color of your stock to your tactical rifle's color scheme. Commercial fits larger diameter 1.17" O.D. commercial buffer tubes. AR-15, Issue:11, Page:045 Big Book Catalog, Issue:69, Page:044

    HOT!
  • ZK-22 10/22® BULLPUP STOCK AKLYS DEFENSE, LLC More Detail

    ZK-22 10/22® BULLPUP STOCK AKLYS DEFENSE, LLC

    Click here for price!$279.99Click here for price!$279.99

    The Aklys Defense ZK-22 drop-in stock kit will accept any standard Ruger® 10/22® receiver with carbine barrel, or .920" Bull barrel ,18.5" or longer. This turns your tired Ruger carbine into a lightweight zombie killing machine or the coolest .22 rifle on the block or range. Features: Engineered, designed, built and assembled in the USA! Easy install. No gunsmith needed. Install at home. Accepts 18.5" inch or longer Ruger or aftermarket barrels up .920 in diameter. The stock comes with adapters that will let you use standard or heavy barrels. Accepts most full capacity magazines including the MWG 50 round coffin magazine and the Ruger® BX-25®. Provides rail mount system for mounting optics or other accessories. Ambidextrous charging handle, Sling point mounts, safety and mag release. Integral trigger safety. Adjustable trigger interface to tune to your preference of triggers. Shell deflector included allowing for full ambidextrous use. This stock requires an 18.5" inch or longer barrel length Ruger® 10/22® in order to not violate NFA overall length requirements.

    HOT!

Subscribe our newsletter

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Ex, velit!