• #2 MUZZLE BRAKE 22 CALIBER SHREWD More Detail

    #2 MUZZLE BRAKE 22 CALIBER SHREWD

    Click here for price!$59.99Click here for price!$59.99

    Multi-port brake softens felt recoil and reduces muzzle rise. A single expansion chamber and 42 total ports, 21 on each side, angled 7° forward, provide maximum recoil control. Blast and sound are directed forward, away from the shooter. Non-vented top and bottom surfaces reduce muzzle rise while limiting dust signature. Gunsmithing required. Comes with a .220" (nominal) diameter exit hole that must be opened up to .020" larger than bullet diameter. Can be enlarged to allow bullets up to .44 caliber. Rear exterior of comp can be machined to conform to barrel. Big Book Catalog, Issue:69, Page:171

    HOT!
  • AR .308  M11 MUZZLE BRAKE 30 CALIBER PRECISION ARMAMENT More Detail

    AR .308 M11 MUZZLE BRAKE 30 CALIBER PRECISION ARMAMENT

    Click here for price!$109.99 - $119.99Click here for price!$109.99 - $119.99

    Superior Recoil Management With Minimal Dust Signature Designed for tactical applications that require minimal dust signature. A massive symmetrical blast baffle, combined with two compensated front baffles, redirect gas to the sides and upward delivering unparalleled recoil reduction while also minimizing muzzle rise and ground disturbance. High tolerance class-3 threads machined in same operation as bore aperture ensures perfect concentricity; this combined with a progressively decreasing baffle thickness minimizes bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy. Computer FEA optimized for maximum strength to weight ratio and impact survivability. Precision CNC machined from high strength HTSR 400-series stainless steel bar for superior heat and corrosion resistance. Available in either an ultra wear resistant DLC (Diamond-Like Carbon) matte black finish, or stainless steel in-the-white, satin finish. Wrench flats on top and bottom for easy installation and removal. Accu-Washer Muzzle Alignment System advised for installation. AR-15, Issue:11, Page:024 Big Book Catalog, Issue:69, Page:023 Sinclair, Issue:5B, Page:249

    HOT!
  • AR .308  M4-72 SEVERE-DUTY BRAKE 30 CALIBER PRECISION ARMAMENT More Detail

    AR .308 M4-72 SEVERE-DUTY BRAKE 30 CALIBER PRECISION ARMAMENT

    Click here for price!$99.99Click here for price!$99.99

    Compensator features a large initial expansion chamber which dissipates combustion gases at a lower pressure, then directs the gases to the side and rear through precisely canted vents. Innovative reverse venting design reduces recoil and blowback while eliminating muzzle rise. Closed bottom in compensator greatly diminishes dust signature. Machined from high strength stainless steel for corrosion resistance, compensator will not erode due to the extreme heat of automatic fire. Requires use of Accu-Washers sold seperately for proper installation.

    HOT!
  • AR-15  M4-72 SEVERE-DUTY COMPENSATOR DLC 22 CALIBER PRECISION ARMAMENT More Detail

    AR-15 M4-72 SEVERE-DUTY COMPENSATOR DLC 22 CALIBER PRECISION ARMAMENT

    Click here for price!$89.99Click here for price!$89.99

    Reduces Recoil & Withstands Heat From Automatic Fire Compensator features a large initial expansion chamber which dissipates combustion gases at a lower pressure, then directs the gases to the side and rear through precisely canted vents. Innovative reverse venting design reduces recoil and blowback while eliminating muzzle rise. Closed bottom in compensator greatly diminishes dust signature. Machined from high strength stainless steel for corrosion resistance, compensator will not erode due to the extreme heat of automatic fire. Requires use of Accu-Washers sold seperately for proper installation. AR-15, Issue:11, Page:024 Big Book Catalog, Issue:69, Page:023

    HOT!
  • AR-15  MICULEK COMPENSATOR 22 CALIBER DPMS More Detail

    AR-15 MICULEK COMPENSATOR 22 CALIBER DPMS

    Click here for price!$39.99Click here for price!$39.99

    Six-Port Design Directs Blast Away From Shooter BLMIC- Three large baffles with six side ports and no top vents direct muzzle gases to the side, away from the shooter. Effectively counters muzzle rise and recoil, minimizes felt muzzle blast. High volume shooters will appreciate reduced noise and ease of cleaning. Solid bottom minimizes dust printing when shooting prone. Easy installation, secured with the supplied lock-nut. Designed and used by Jerry Miculek.   AR-15, Issue:11, Page:024 Big Book Catalog, Issue:69, Page:022

    HOT!
  • AR-15 MUZZLE BRAKE Q-COMP WILSON COMBAT More Detail

    AR-15 MUZZLE BRAKE Q-COMP WILSON COMBAT

    Click here for price!$59.95Click here for price!$59.95

    The Wilson Combat Q-Comp has been designed by their compensator experts to greatly enhance recoil control in rapid fire without the harsh blast and flash that other AR-15 muzzle devices exhibit. The Q-Comp is a hybrid Ar-15 brake/compensator that has been tuned to minimize the side-blast and concussion compared to other muzzle devices on the market. The exclusive Wilson Combat design displays almost zero muzzle flash yet retains excellent vertical and rearward recoil reduction with all calibers. The slotted expansion chamber design of the Q-Comp has no prongs or tines to break off or snag and is Melonite QPQ coated alloy steel for maximum durability and corrosion resistance. The Q-Comp is easily installed on your AR rifle, and the included crush washer eliminates the need for a shim kit. ½-28 TPI threads with an internal bore diameter of .375” to work with most 5.56 (standard USGI thread pitch), some 300 BLK and calibers up to 9mm Luger. 5/8-24 TPI threads with an internal bore diameter of .375” for most 6.8, most .300 and .308 rifles, and some 9mm (Wilson AR-9). 11/16-24 TPI threads with an internal bore diameter of .485” for Wilson Combat SOCOM rilfes and some other aftermarket large caliber AR’s.

    HOT!
  • #3 MUZZLE BRAKE 22 CALIBER SHREWD More Detail

    #3 MUZZLE BRAKE 22 CALIBER SHREWD

    Click here for price!$59.99Click here for price!$59.99

    Multi-port brake softens felt recoil and reduces muzzle rise. A single expansion chamber and 42 total ports, 21 on each side, angled 7° forward, provide maximum recoil control. Blast and sound are directed forward, away from the shooter. Non-vented top and bottom surfaces reduce muzzle rise while limiting dust signature. Gunsmithing required. Comes with a .220" (nominal) diameter exit hole that must be opened up to .020" larger than bullet diameter. Can be enlarged to allow bullets up to .44 caliber. Rear exterior of comp can be machined to conform to barrel. Big Book Catalog, Issue:69, Page:171

    HOT!
  • AR-15  DRAGON MUZZLE BRAKE 22 CALIBER LANTAC More Detail

    AR-15 DRAGON MUZZLE BRAKE 22 CALIBER LANTAC

    Click here for price!$125.19Click here for price!$125.19

    Enhances Muzzle Control & Reduces Felt Recoil The LANTAC Dragon Muzzle Brake has vertical ports in the primary discharge chamber to counteract muzzle rise, while the Short Energy Pulse system decreases recoil length, preventing stacking of repeating shot energy and enabling fast, accurate follow-up shots. Even with fully automatic fire, the Dragon delivers significant reduced recoil and muzzle climb, so more shots land on target. Machined from ultra-hard steel, the Dragon is virtually impervious to heat, corrosion and wear. Flats on the side allow you to install it with any standard wrench. Includes crush washer for secure fit and proper indexing. AR-15, Issue:11, Page:024 Big Book Catalog, Issue:69, Page:023

    HOT!
  • #1 MUZZLE BRAKE 22 CALIBER SHREWD More Detail

    #1 MUZZLE BRAKE 22 CALIBER SHREWD

    Click here for price!$59.99Click here for price!$59.99

    Multi-port brake softens felt recoil and reduces muzzle rise. A single expansion chamber and 42 total ports, 21 on each side, angled 7° forward, provide maximum recoil control. Blast and sound are directed forward, away from the shooter. Non-vented top and bottom surfaces reduce muzzle rise while limiting dust signature. Gunsmithing required. Comes with a .220" (nominal) diameter exit hole that must be opened up to .020" larger than bullet diameter. Can be enlarged to allow bullets up to .44 caliber. Rear exterior of comp can be machined to conform to barrel. Big Book Catalog, Issue:69, Page:171

    HOT!
  • M11 SEVERE-DUTY MUZZLE BRAKE 6.5 CALIBER PRECISION ARMAMENT More Detail

    M11 SEVERE-DUTY MUZZLE BRAKE 6.5 CALIBER PRECISION ARMAMENT

    Click here for price!$113.99Click here for price!$113.99

    Superior Recoil Management With Minimal Dust Signature. Designed for tactical applications that require minimal dust signature. A massive symmetrical blast baffle, combined with two compensated front baffles, redirect gas to the sides and upward delivering unparalleled recoil reduction while also minimizing muzzle rise and ground disturbance. High tolerance class-3 threads machined in same operation as bore aperture ensures perfect concentricity; this combined with a progressively decreasing baffle thickness minimizes bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy. Computer FEA optimized for maximum strength to weight ratio and impact survivability. Precision CNC machined from high strength HTSR 400-series stainless steel bar for superior heat and corrosion resistance. Available in either an ultra wear resistant DLC (Diamond-Like Carbon) matte black finish, or stainless steel in-the-white, satin finish. Wrench flats on top and bottom for easy installation and removal. Accu-Washer Muzzle Alignment System advised for installation.

    HOT!
  • AR-15  M11-SPR MUZZLE BRAKE 22 CALIBER PRECISION ARMAMENT More Detail

    AR-15 M11-SPR MUZZLE BRAKE 22 CALIBER PRECISION ARMAMENT

    Click here for price!$104.99Click here for price!$104.99

    Designed for tactical applications that require minimal dust signature. A massive symmetrical blast baffle, combined with two compensated front baffles, redirect gas to the sides and upward delivering unparalleled recoil reduction while also minimizing muzzle rise and ground disturbance. High tolerance class-3 threads machined in same operation as bore aperture ensures perfect concentricity; this combined with a progressively decreasing baffle thickness minimizes bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy. Computer FEA optimized for maximum strength to weight ratio and impact survivability. Precision CNC machined from high strength HTSR 400-series stainless steel bar for superior heat and corrosion resistance. Available in either an ultra wear resistant DLC (Diamond-Like Carbon) matte black finish, or stainless steel in-the-white, satin finish. Wrench flats on top and bottom for easy installation and removal. Accu-Washer Muzzle Alignment System advised for installation. AR-15, Issue:11, Page:025 Big Book Catalog, Issue:69, Page:023

    HOT!
  • QUICK DISCHARGE BRAKE 30 CALIBER HOLLANDS GUNSMITHING More Detail

    QUICK DISCHARGE BRAKE 30 CALIBER HOLLANDS GUNSMITHING

    Click here for price!$119.99 - $124.99Click here for price!$119.99 - $124.99

    Three expansion chambers provide up to 45% measured reduction in felt recoil. Triple baffle, exhaust slots redirect noise and muzzle blast away from the shooter. Gives high volume shooters a quiet sounding brake that's easy to clean. Closed bottom keeps exiting gas from blowing up dirt and debris. Tapered shank for easier fitting to different barrel diameters. Adds 1-1/4" to barrel length. Comes with a thread protector.     NOTE: Calibers above 223 the muzzle brake must be drilled out. Big Book Catalog, Issue:69, Page:170

    HOT!
  • SANDMAN KEYMOUNT MUZZLE BRAKES DEAD AIR ARMAMENT More Detail

    SANDMAN KEYMOUNT MUZZLE BRAKES DEAD AIR ARMAMENT

    Click here for price!$76.99Click here for price!$76.99

    Available for standard 7.62x51mm and 5.56×45 threaded barrels, the Keymount Muzzle Brake is your gateway to silence. When you’re ready for peace and quiet use the Keymount brake to quickly attach your Sandman-L™ or Sandman-S™ to your rifle. If you’re not quite ready to turn up the silence, you can still employ the finest brake on the market and experience a flatter shooting rifle with minimal concussion compared to traditional muzzle brakes.

    HOT!
  • AR .308  M41 MUZZLE BRAKE 30 CALIBER PRECISION ARMAMENT More Detail

    AR .308 M41 MUZZLE BRAKE 30 CALIBER PRECISION ARMAMENT

    Click here for price!$109.99 - $119.99Click here for price!$109.99 - $119.99

    Maximum recoil reduction for Long Range Precision Rifles Three large axisymmetric baffles, each featuring five helical ports, redirect a massive volume of gas away from the bore axis in a counter-clockwise radial direction. This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates. High tolerance class-3 threads machined in same operation as bore aperture ensures perfect concentricity; this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy. Computer FEA optimized for maximum strength to weight ratio and impact survivability. Precision CNC machined from high strength HTSR 400-series stainless steel bar for superior heat and corrosion resistance. Can be modified by a qualified gunsmith to fit larger thread diameters (up to 3/4" or 18mm). Available in either an ultra wear resistant DLC (Diamond-Like Carbon) matte black finish, or stainless steel in-the-white, satin finish. M41 Spanner Wrench advised for installation and removal. AR-15, Issue:11, Page:024 Big Book Catalog, Issue:69, Page:023 Sinclair, Issue:5B, Page:249

    HOT!
  • AR-15  STANDARD TACTICAL COMPENSATOR .750 22 CAL J P ENTERPRISES More Detail

    AR-15 STANDARD TACTICAL COMPENSATOR .750 22 CAL J P ENTERPRISES

    Click here for price!$85.99Click here for price!$85.99

    Efficient Reduction Of Felt Recoil; Legal For Tactical Matches Low-profile steel compensator redirects and harnesses combustion gas energy to reduce felt recoil by as much as 70% compared to an uncompensated barrel. Helps the shooter stay on target for accurate follow-up shots and fast transition to the next target. Built to the exacting requirements of noted professional weapons instructor and tactical competition shooter Bennie Cooley to combine the recoil reduction of J.P.’s popular Recoil Eliminator muzzle brake in a slim, streamlined compensator that meets the 1" x 3" size requirements of SOF, WC 3-Gun, USPSA Limited, and other tactical rifle competitions. Large, flat interior baffle surfaces allow the bullet to pass through while redirecting the rapidly expanding gas to the sides and slightly forward through the square-cut side vents to create forward thrust that counteracts bullet recoil. The higher the pressure, the more counteracting force the comp actually provides. In addition, four tuned ports on top minimize muzzle rise, further helping the shooter keep the sights on target. Solid bottom prevents kicking up a dust signature when shooting prone. Precision-machined from high-grade carbon steel, with a tough matte black oxide finish, or stainless steel with a brightly polished surface. All models fit rifles chambered in .223/5.56mm; can be bored out for larger calibers. Standard Profile available for barrels with .750" or .875" O.D. at muzzle. AR-15, Issue:11, Page:024 Big Book Catalog, Issue:69, Page:022

    HOT!
  • AR .308  DRAGON MUZZLE BRAKE 30 CALIBER LANTAC More Detail

    AR .308 DRAGON MUZZLE BRAKE 30 CALIBER LANTAC

    Click here for price!$144.00Click here for price!$144.00

    The LANTAC Dragon Muzzle Brake has vertical ports in the primary discharge chamber to counteract muzzle rise, while the Short Energy Pulse system decreases recoil length, preventing stacking of repeating shot energy and enabling fast, accurate follow-up shots. Even with fully automatic fire, the Dragon delivers significant reduced recoil and muzzle climb, so more shots land on target. Machined from ultra-hard steel, the Dragon is virtually impervious to heat, corrosion and wear. Flats on the side allow you to install it with any standard wrench. Includes crush washer for secure fit and proper indexing. AR-15, Issue:11, Page:024 Big Book Catalog, Issue:69, Page:023

    HOT!
  • AR-15 BATTLECOMP 1.0 22 CALIBER BATTLE COMP ENTERPRISES, LLC. More Detail

    AR-15 BATTLECOMP 1.0 22 CALIBER BATTLE COMP ENTERPRISES, LLC.

    Click here for price!$139.99Click here for price!$139.99

    Multi-Mode Compensator Reduces Muzzle Climb without Creating Huge Flash Multi-purpose compensator reduces muzzle climb, so you stay on target between shots during rapid fire engagements. Produces less concussion than most muzzle brakes for a smaller dust signature when shooting prone. California Legal Compensator is legal in all 50 states. BC1.0fit .223/5.56 rifles with ½ x 28 tpi muzzle threads. AR-15, Issue:11, Page:023 Big Book Catalog, Issue:69, Page:021

    HOT!
  • AR-15 SPECWAR MUZZLE BRAKE 30 CALIBER SILENCERCO More Detail

    AR-15 SPECWAR MUZZLE BRAKE 30 CALIBER SILENCERCO

    Click here for price!$79.99Click here for price!$79.99

    This 3-port muzzle brake is compatible with the Specwar, Saker, Omega, Hybrid, and Harvester Big Bore ASR mounting system. They offer one hand on, one hand off attachment/detachment. The 3-port design effectively reduces felt recoil and muzzle climb.

    HOT!
  • AR-15  BRAKEOUT 2.0 COMPENSATOR 51T 22 CALIBER ADVANCED ARMAMENT More Detail

    AR-15 BRAKEOUT 2.0 COMPENSATOR 51T 22 CALIBER ADVANCED ARMAMENT

    Click here for price!$109.99Click here for price!$109.99

    The BRAKEOUT® 2.0 is a silencer mounting muzzle device that is both a flash suppressor and muzzle brake in one. The BRAKEOUT® 2.0 offers the best of both worlds in a truly compromise-free design. The BRAKEOUT® 2.0 offers outstanding recoil reduction tested to be fully equal to the best conventional muzzle brakes, along with excellent flash reduction performance. The new symmetrical design of the BRAKEOUT® 2.0 does not need to be timed with shims like a conventional muzzle brake, simplifying installation. The BRAKEOUT® 2.0 is offered as a 51T Taper variants with 1⁄2-28 threads. AR-15, Issue:11, Page:023 Big Book Catalog, Issue:69, Page:021

    HOT!
  • MICRO-BRAKE 30 CALIBER VAIS More Detail

    MICRO-BRAKE 30 CALIBER VAIS

    Click here for price!$94.99 - $109.99Click here for price!$94.99 - $109.99

    Same performance in a short, compact brake that looks “right” and saves weight on carbines or lighter rifles. .750" (19mm) O.D. can be turned down to .650" (16mm) to match thinner barrel contours. Big Book Catalog, Issue:69, Page:172

    HOT!
  • AR .308  MICULEK COMPENSATOR 30 CALIBER DPMS More Detail

    AR .308 MICULEK COMPENSATOR 30 CALIBER DPMS

    Click here for price!$59.99Click here for price!$59.99

    308BLMIC- Modeled after the Miculek Compensator for the AR, six opposing side ports direct gasses outward reducing muzzle jump and giving the LR-308's a reduced felt recoil similar to that of an AP4 Carbine. Made of 4140 steel with a manganese phosphated finish, this new compensator measures 15/16" diameter and 2 3/8" length. Thread pitch 5/8-24. AR-15, Issue:11, Page:024 Big Book Catalog, Issue:69, Page:022

    HOT!
  • MUZZLE BRAKE 30 CALIBER VAIS More Detail

    MUZZLE BRAKE 30 CALIBER VAIS

    Click here for price!$94.99 - $109.99Click here for price!$94.99 - $109.99

    An incredible maze of gas dispersing holes limits muzzle rise with no increase in muzzle blast. Multiple venturi expansion chambers disperse and redirect gases for effective recoil control, while limiting blast effects. Unique design features attenuating holes that are both horizontal and perpendicular to the centerline of the bore to disperse gas and sound equally to all sides. Available in steel with Parkerized finish or stainless steel with matte finish. Big Book Catalog, Issue:69, Page:172

    HOT!
  • AR-15 PRECISION EPSILON MUZZLE BRAKE, 5.56 VG6 PRECISION More Detail

    AR-15 PRECISION EPSILON MUZZLE BRAKE, 5.56 VG6 PRECISION

    Click here for price!$79.99Click here for price!$79.99

    Designed for the discriminating shooter and professional end-users, VG6 Precision's EPSILON 556 affords you the best muzzle control and recoil mitigation the industry has to offer. This is a true combination muzzle brake / compensator / flash hider. Its performance is matched only by the amazing look of this device. The VG6 Epsilon556 carries many of the same characteristics as the Gamma556 with a few exceptions. Extended flash hiding prongs and no ports at the 12 o’clock positions allow uninhibited view from flash through optics or sights. The difference in porting is also noticed on the underside of the device where it has 6 valve holes to allow the fastest gasses reaching the second chamber to exit. This creates very soft low energy recoil that allows for absolute control. The VG6 Epsilon556 carries all these specs and is priced well below our competitors.     Includes pre-drilled hole for pinning to a 14.5” barrel for an overall length of 16.1”.

    HOT!
  • AR-15  AFAB HYBRID MUZZLE BRAKE 22 CALIBER PRECISION ARMAMENT More Detail

    AR-15 AFAB HYBRID MUZZLE BRAKE 22 CALIBER PRECISION ARMAMENT

    Click here for price!$109.99Click here for price!$109.99

    Battlefield Performance Without Compromise Combines the performance of both a dedicated flash hider and a dedicated compensator. Patent-pending AFAB™ technology employs a complex matrix of tiny passageways that slowly diffuse and cool combustion gases so you can stay on target during rapid fire engagements while effectively suppressing muzzle flash and side concussion. Closed bottom design reduces dust signature when shooting prone. Precision machined from heat treated stainless steel with an advanced Ionbond® high temperature CrCN coating for extreme durability. Fits .223/5.56mm rifles with 1/2-28 muzzle threads. Features pilot hole for permanent pinning to bring 14.5" barrels to legal length. Accu-Washer™ Muzzle Alignment System required for installation. Big Book Catalog, Issue:69, Page:023

    HOT!

Subscribe our newsletter

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Ex, velit!