• 1911 AUTO OVERSIZED STOCK BUSHINGS & TAP BROWNELLS More Detail

    1911 AUTO OVERSIZED STOCK BUSHINGS & TAP BROWNELLS

    Click here for price!$12.99 - $99.99Click here for price!$12.99 - $99.99

    Professionally And Easily Replace Stripped-Out Bushing Holes-No Welding Or DrillingEasily and professionally solves the problem of stripped out stock bushing holes. Special tap cleans out stripped frame threads, cuts new ones without pre-drilling. Matching bushing screws right in, uses original grip screw. Will save your life when polishing/bluing, accurizing .45's! 1911, Issue:11, Page:041 Big Book Catalog, Issue:69, Page:133 Sinclair, Issue:1A, Page:038

    HOT!
  • 1911 STOCK BUSHINGS BROWNELLS More Detail

    1911 STOCK BUSHINGS BROWNELLS

    Click here for price!$6.99 - $69.99Click here for price!$6.99 - $69.99

    Made to Original Factory Specs For Easy ReplacementThe 1911 Government model auto is about as rugged as a mountain mule, but when you take the grips off to polish and reblue the critter or put on another set of grips, chances are that the stock frame bushing will be stripped. And, when you remove the frame bushings to get the best polishing job on the frame, you’ll find yourself looking for new bushings. Standard Stock Bushing - Nicely made and finished, these special-sized, bushings are packed in sets of 4 Bushings. Stainless Steel (S/S) Stock Bushing - Look “right” on stainless steel and nickel-plated guns. 1911, Issue:11, Page:042 Big Book Catalog, Issue:69, Page:133 Sinclair, Issue:1A, Page:038

    HOT!
  • SLIM GRIP SCREWS & BUSHINGS BROWNELLS More Detail

    SLIM GRIP SCREWS & BUSHINGS BROWNELLS

    Click here for price!$12.99 - $13.99Click here for price!$12.99 - $13.99

    The Right Fit For Thin GripsReplacement package of four, short socket-head screws and bushings for use with Slim Grips. Hex head looks great and prevents ragged looking screws. 1911, Issue:11, Page:041 Big Book Catalog, Issue:69, Page:132 Sinclair, Issue:1A, Page:038

    HOT!
  • 1911 GRIP SCREW BUSHING WILSON COMBAT More Detail

    1911 GRIP SCREW BUSHING WILSON COMBAT

    Click here for price!$6.99Click here for price!$6.99

    Standard thickness grip screw bushings are a direct replacement for one that is damaged or stripped during use. Note: Most factory installed bushings require removal of rear staking for new bushing installation. Re-staking or loctite 271 are acceptable ways to secure your new bushing in the frame. Sold as a set of 4. 1911, Issue:11, Page:041 Big Book Catalog, Issue:69, Page:132

    HOT!
  • HEX DRIVE BUSHINGS CHALLIS GRIPS More Detail

    HEX DRIVE BUSHINGS CHALLIS GRIPS

    Click here for price!$12.99 - $84.99Click here for price!$12.99 - $84.99

    Challis hex drive bushings are a breakthrough design, perfect for a custom build, replacing damaged bushings or changing between standard and slim grips. Uses a 7/32” nut driver which allows you to feel thread engagement and avoid damaging cross threading, and the robust hex head will handle the torque needed for proper seating, without concern for distorting the bushing or slipping and scratching your gun. Using the same driver, they are easily removed with no risk to frame or bushing. Unlike the old style, Challis bushings can be reused multiple times. Hex drive bushings can be fit with an optional O-ring which keeps grips snugly in place and minimizes shock to the grips and bushings during discharge. Use of O-rings will reduce scuffing of the frame by G10 and other abrasive grips, protect fragile and expensive grips such as ivory and mammoth tooth, and minimize loosening of bushings caused by heavy grip materials such as G10, carbon fiber and aluminum. Using Challis grip screw O-rings with hex head bushings will provide additional shock absorbing protection for gun, grips and bushings. Big Book Catalog, Issue:69, Page:132

    HOT!
  • 1911 GRIP SCREW BUSHINGS EGW More Detail

    1911 GRIP SCREW BUSHINGS EGW

    Click here for price!$7.99 - $8.99Click here for price!$7.99 - $8.99

    Hex Head Prevents Slot Stripping & ScratchingWhether you’re building a custom 1911 or just upgrading grips, these high-quality, economical replacement grip bushings will provide a secure, neat-looking installation. 1911, Issue:11, Page:041 Big Book Catalog, Issue:69, Page:132 Sinclair, Issue:1A, Page:038

    HOT!
  • SLIM GRIP SCREW BUSHINGS ED BROWN More Detail

    SLIM GRIP SCREW BUSHINGS ED BROWN

    Click here for price!$13.99 - $14.99Click here for price!$13.99 - $14.99

    Give Your 1911 Auto That High Tech LookAllen head screws are contoured to fit flush in your 1911 slim grips. Low-profile bushings replace your 1911’s factory originals, letting you install slim grips for a minimal grip profile on concealed-carry guns or for shooters with small hands. Bushings are sold separately, in paks of 4. 1911, Issue:11, Page:041 Big Book Catalog, Issue:69, Page:132 Sinclair, Issue:1A, Page:038

    HOT!
  • GRIP SCREW & BUSHING O-RINGS CHALLIS GRIPS More Detail

    GRIP SCREW & BUSHING O-RINGS CHALLIS GRIPS

    Click here for price!$1.99 - $9.99Click here for price!$1.99 - $9.99

    These custom O-rings are for use only with Challis hex drive bushings. As the grip screws are tightened, the O-ring is forced down a conical seat and outward against the counterbore in the bottom of the grip. When the grip is fully seated, the compressed O-ring holds the grip firmly in place and isolates it from the bushing. Use of O-rings will reduce scuffing of the frame by G10 and other abrasive grips, protect fragile and expensive grips such as ivory and mammoth tooth, and minimize loosening of bushings caused by heavy grip materials such as G10, carbon fiber and aluminum. The custom size Challis grip screw O-rings provide additional shock absorption and prevent grip screws from backing out. They can be used with any 1911 grip screws and any bushings, but are most effective when used with Challis hex drive grip bushings. Use of both the bushing O-ring and the grip screw O-ring will deliver maximum protection for your gun and your grips.   Big Book Catalog, Issue:69, Page:132

    HOT!
  • BUSHING, GRIP 8000/84F/92SER BERETTA USA More Detail

    BUSHING, GRIP 8000/84F/92SER BERETTA USA

    Click here for price!$3.99Click here for price!$3.99

    FITS: M9A1, 9mm; Model 92; Model 92/96 FS Compact L, 9mm, .40; Model 92/96 INOX, 9mm Big Book Catalog, Issue:68, Page:573 Big Book Catalog, Issue:68, Page:575 Big Book Catalog, Issue:68, Page:576

    HOT!
  • 1911 HEX DRIVE OVERSIZE BUSHINGS CHALLIS GRIPS More Detail

    1911 HEX DRIVE OVERSIZE BUSHINGS CHALLIS GRIPS

    Click here for price!$19.99 - $23.99Click here for price!$19.99 - $23.99

    Challis hex drive bushings are a breakthrough design, perfect for a custom build, replacing damaged bushings or changing between standard and slim grips. Uses a 7/32” nut driver which allows you to feel thread engagement and avoid damaging cross threading, and the robust hex head will handle the torque needed for proper seating, without concern for distorting the bushing or slipping and scratching your gun. Using the same driver, they are easily removed with no risk to frame or bushing. Unlike the old style, Challis bushings can be reused multiple times. Hex drive bushings can be fit with an optional O-ring which keeps grips snugly in place and minimizes shock to the grips and bushings during discharge. Use of O-rings will reduce scuffing of the frame by G10 and other abrasive grips, protect fragile and expensive grips such as ivory and mammoth tooth, and minimize loosening of bushings caused by heavy grip materials such as G10, carbon fiber and aluminum. Using Challis grip screw O-rings with hex head bushings will provide additional shock absorbing protection for gun, grips and bushings.   Big Book Catalog, Issue:69, Page:132

    HOT!
  • HEX DRIVE SLIM BUSHINGS CHALLIS GRIPS More Detail

    HEX DRIVE SLIM BUSHINGS CHALLIS GRIPS

    Click here for price!$12.99 - $84.99Click here for price!$12.99 - $84.99

    Hex Drive Bushings are easy to install and remove with a 7/32" hex driver. Patent Pending O-rings do not come with bushings; please order separately Big Book Catalog, Issue:69, Page:132

    HOT!
  • HEX DRIVE OVERSIZE SLIM BUSHINGS CHALLIS GRIPS More Detail

    HEX DRIVE OVERSIZE SLIM BUSHINGS CHALLIS GRIPS

    Click here for price!$19.99 - $23.99Click here for price!$19.99 - $23.99

    Challis hex drive bushings are a breakthrough design, perfect for a custom build, replacing damaged bushings or changing between standard and slim grips. Uses a 7/32” nut driver which allows you to feel thread engagement and avoid damaging cross threading, and the robust hex head will handle the torque needed for proper seating, without concern for distorting the bushing or slipping and scratching your gun. Using the same driver, they are easily removed with no risk to frame or bushing. Unlike the old style, Challis bushings can be reused multiple times. Hex drive bushings can be fit with an optional O-ring which keeps grips snugly in place and minimizes shock to the grips and bushings during discharge. Use of O-rings will reduce scuffing of the frame by G10 and other abrasive grips, protect fragile and expensive grips such as ivory and mammoth tooth, and minimize loosening of bushings caused by heavy grip materials such as G10, carbon fiber and aluminum. Using Challis grip screw O-rings with hex head bushings will provide additional shock absorbing protection for gun, grips and bushings. Big Book Catalog, Issue:69, Page:132

    HOT!
  • 1911 9MM GOVERNMENT SS STOCK SCREW BUSHING COLT More Detail

    1911 9MM GOVERNMENT SS STOCK SCREW BUSHING COLT

    Click here for price!$3.99Click here for price!$3.99

    FITS: 1911 - Common Parts 1911, Issue:09, Page:069 Big Book Catalog, Issue:68, Page:599

    HOT!
  • 1911 GRIP SCREW ESCUTCHEON SPRINGFIELD ARMORY More Detail

    1911 GRIP SCREW ESCUTCHEON SPRINGFIELD ARMORY

    Click here for price!$2.99Click here for price!$2.99

    FITS: Loaded Models 1911, 45; Mil Spec 1911, 45

    HOT!
  • BUSHING, GRIP, 92/96 STOCK & COMBAT BERETTA USA More Detail

    BUSHING, GRIP, 92/96 STOCK & COMBAT BERETTA USA

    Click here for price!$3.99Click here for price!$3.99

    FITS: Model 92 Big Book Catalog, Issue:68, Page:575

    HOT!
  • P9S 210337 BUSHING, BOTTOM HECKLER & KOCH More Detail

    P9S 210337 BUSHING, BOTTOM HECKLER & KOCH

    Click here for price!$4.99Click here for price!$4.99

    FITS: P9S Big Book Catalog, Issue:68, Page:611

    HOT!
  • GRIP PANEL BUSHING (PKG OF 4) RUGER More Detail

    GRIP PANEL BUSHING (PKG OF 4) RUGER

    Click here for price!$12.99Click here for price!$12.99

    FITS: SR1911®, 45 ACP Big Book Catalog, Issue:68, Page:646

    HOT!
  • BUSHING, GRIP 85F/86/87/85B/BB BERETTA USA More Detail

    BUSHING, GRIP 85F/86/87/85B/BB BERETTA USA

    Click here for price!$3.51Click here for price!$3.51

    FITS: Model 85, .380 Auto Big Book Catalog, Issue:68, Page:574

    HOT!
  • P30, P2000 BUSHING, DAO, P2000/P30 HECKLER & KOCH More Detail

    P30, P2000 BUSHING, DAO, P2000/P30 HECKLER & KOCH

    Click here for price!$5.99Click here for price!$5.99

    FITS: P30, P2000 Big Book Catalog, Issue:68, Page:611

    HOT!
  • P9S SUPPORT, P9S HECKLER & KOCH More Detail

    P9S SUPPORT, P9S HECKLER & KOCH

    Click here for price!$14.99Click here for price!$14.99

    FITS: P9S

    HOT!
  • 1911 T.L. GRP SCRW ESCUTCH. SPRINGFIELD ARMORY More Detail

    1911 T.L. GRP SCRW ESCUTCH. SPRINGFIELD ARMORY

    Click here for price!$1.99Click here for price!$1.99

    FITS: Micro Compact Models 1911, 45

    HOT!

Subscribe our newsletter

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Ex, velit!