• AR-15 MOE+ GRIP MAGPUL More Detail

    AR-15 MOE+ GRIP MAGPUL

    Click here for price!$22.75Click here for price!$22.75

    Rubber-Coated Surface Provides Maximum Control In Adverse EnvironmentsSame contours and hard-molded polymer construction as the original MOE Grip. Durable, economical, easy-to-install replacement for factory pistol grip that gives the shooter a solid, secure grasp. Rigid, fully supported one-piece construction from the same reinforced, high-impact polymer as the MIAD grip, with crackle texture on the sides and deep horizontal grooves on frontstrap and backstrap. Curved beavertail similar to the MIAD B2 insert fills the grip-to-receiver junction to help you maintain a comfortable hold and protect the web of your hand during sustained firing.The MOE+ Grip has the addition of an anti-slip overmolded rubber coating for enhanced weapon control in wet conditions or when hand is sweaty. A polymer cap storage secures small items inside the internal compartment, and the MOE+ accepts Magpul MIAD grip cores (sold separately). AR-15, Issue:11, Page:057 Big Book Catalog, Issue:69, Page:057

    HOT!
  • PICATINNY AFG2 ANGLED FORE GRIP MAGPUL More Detail

    PICATINNY AFG2 ANGLED FORE GRIP MAGPUL

    Click here for price!$33.20Click here for price!$33.20

    Low-profile forward grip/hand stop takes advantage of natural body mechanics to give the shooter more precise control, faster pointing, and less operator fatigue. The Magpul AFG™ (Angled Fore Grip) positions the support hand close to the centerline of the bore for maximum recoil control to aid in fast, accurate follow-up shots. Provides a consistent reference point for finding the correct hand position quickly when mounting the weapon under stress. The natural, ergonomic hand position with the palm facing up results in better blood flow than the “clenched fist” stance often used with vertical grips that leads to fatigue and loss of sensation during long periods in the ready position. Improves on the “thumb break” hold often used with standard vertical grips by allowing the thumb to rest comfortably alongside the top rail, pointing forward, with the rest of the hand in full contact with the forend. Heavy-duty reinforced molded polymer construction stands up to the hard knocks of tactical operations, and deep, molded-in grooves help you maintain a firm grip even with wet hands. Interchangeable inserts give the choice of a straight, uninterrupted gripping surface or one with a convenient ledge to support the index finger. Slides over any Picatinny-style rail and locks securely in place with a hardened steel crossbolt. The more compact AFG2™ is shorter and narrower to take up even less rail space, with enough clearance to fit a larger variety of weapons. Both models may be installed on tactical shotguns and other rifles with railed forends; won’t interfere with insertion and removal of magazines on AK-47s. AR-15, Issue:11, Page:057 Big Book Catalog, Issue:69, Page:059

    HOT!
  • AR-15 MOE K2+ GRIP MAGPUL More Detail

    AR-15 MOE K2+ GRIP MAGPUL

    Click here for price!$23.70Click here for price!$23.70

    The MOE-K2+ combines reinforced polymer body construction with comfortable, wrap around rubber over molding for maximum weapon control in adverse conditions. The steeper vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter’s body. The MOE K2+ accepts optional storage cores for gear stowage and includes a basic cap. AR-15, Issue:11, Page:057 Big Book Catalog, Issue:69, Page:057

    HOT!
  • AR-15 OVERMOLDED BEAVERTAIL GRIP HOGUE More Detail

    AR-15 OVERMOLDED BEAVERTAIL GRIP HOGUE

    Click here for price!$21.99 - $23.99Click here for price!$21.99 - $23.99

     Ergonomically correct finger grooves  Includes trigger guard filler  Cobblestone ™ texture provides  an efficient non-slip stippling pattern  Beavertail  provides extended length of pull  Integrated rear upper extension supports the web of your hand  Virtually impervious to oils and solvents  Accommodates the Samson field survival kit (100-004-235)  Available in Black and Desert Tan AR-15, Issue:11, Page:055 Big Book Catalog, Issue:69, Page:055

    HOT!
  • PICATINNY AFG1 ANGLED FORE GRIP MAGPUL More Detail

    PICATINNY AFG1 ANGLED FORE GRIP MAGPUL

    Click here for price!$33.20Click here for price!$33.20

    Enhances Control & Pointability While Minimizing Fatigue In The "Ready" Position Low-profile forward grip/hand stop takes advantage of natural body mechanics to give the shooter more precise control, faster pointing, and less operator fatigue. The Magpul AFG™ (Angled Fore-Grip) positions the support hand close to the centerline of the bore for maximum recoil control to aid in fast, accurate follow-up shots. Provides a consistent reference point for finding the correct hand position quickly when mounting the weapon under stress. The natural, ergonomic hand position with the palm facing up results in better blood flow than the “clenched fist” stance often used with vertical grips that leads to fatigue and loss of sensation during long periods in the ready position. Improves on the “thumb break” hold often used with standard vertical grips by allowing the thumb to rest comfortably alongside the top rail, pointing forward, with the rest of the hand in full contact with the forend. Heavy-duty reinforced molded polymer construction stands up to the hard knocks of tactical operations, and deep, molded-in grooves help you maintain a firm grip even with wet hands. Interchangeable inserts give the choice of a straight, uninterrupted gripping surface or one with a convenient ledge to support the index finger. Slides over any Picatinny-style rail and locks securely in place with a hardened steel crossbolt. The original AFG1™ provides a large grasping surface and covers approximately 5½" of rail. AR-15, Issue:11, Page:057 Big Book Catalog, Issue:69, Page:059

    HOT!
  • AR-15 PISTOL GRIP HOGUE More Detail

    AR-15 PISTOL GRIP HOGUE

    Click here for price!$21.99 - $35.96Click here for price!$21.99 - $35.96

    Non-Slip Grip Surface; Increases ComfortStrong, fiberglass insert fits solidly against the frame, resists wear, won’t loosen. Orthopedic design with palm swells and finger grooves reduces shock, increases shooting comfort; maintains a stock appearance. AR-15, Issue:11, Page:051 AR-15, Issue:11, Page:055 Big Book Catalog, Issue:69, Page:055

    HOT!
  • AR-15 MOE GRIP MAGPUL More Detail

    AR-15 MOE GRIP MAGPUL

    Click here for price!$18.95Click here for price!$18.95

    Improves Comfort For Better Weapon Handling & Control Magpul Original Equipment (MOE) grip is a durable, economical, easy-to-install replacement for factory pistol grip that gives the shooter a solid, secure grasp. Rigid, fully supported one-piece construction from the same reinforced, high-impact polymer as the MIAD grip, with crackle texture on the sides and deep horizontal grooves on frontstrap and backstrap. Curved beavertail similar to the MIAD B2 insert fills the grip-to-receiver junction to help you maintain a comfortable hold and protect the web of your hand during sustained firing. Compatible with Magpul MIAD Grip Cores and Enhanced Aluminum Triggerguard, available separately. AR-15, Issue:11, Page:057 Big Book Catalog, Issue:69, Page:057 Sinclair, Issue:5B, Page:251

    HOT!
  • AR-15 MIAD GEN 1.1 GRIP KIT MAGPUL More Detail

    AR-15 MIAD GEN 1.1 GRIP KIT MAGPUL

    Click here for price!$34.15Click here for price!$34.15

    Interchangeable Inserts Let You Configure To Fit Your Hand Mission Adaptable (MIAD) modular grip system with interchangeable inserts lets you find the grip configuration that fits your hand size and mission requirements. All models come with main grip body and detachable rubber core that holds a ½ oz. lubrication bottle in the cap. Additional cores for storing batteries and other items are available separately. Front- and backstrap inserts slide on easily, yet snap firmly into place and require no glue or screws to stay put. Comes with one straight and two different beavertail backstrap inserts, plus one straight and one finger-ledge front strap insert. Reinforced molded polymer construction. AR-15, Issue:11, Page:057 Big Book Catalog, Issue:69, Page:057

    HOT!
  • PICATINNY RVG RAILED VERTICAL GRIP MAGPUL More Detail

    PICATINNY RVG RAILED VERTICAL GRIP MAGPUL

    Click here for price!$23.70Click here for price!$23.70

    Lightweight vertical grips position your support hand close to the barrel to help you maintain maximum weapon control at all times. Ergonomically shaped design is optimized for use with the “thumb break” method of grasping the weapon, yet works just as well with a traditional vertical grip stance. Aggressive horizontal serrations on the front and back, plus crackle texturing on the sides ensure a secure grasp in all weather conditions. RVG™ (Rail Vertical Grip) combines the MVG’s ergonomic features with a conventional Picatinny attachment system for use on standard railed handguards. Includes an adapter that enables installation on many non-railed forends, too. AR-15, Issue:11, Page:058 Big Book Catalog, Issue:69, Page:058

    HOT!
  • AR-15 MONSTERMAN GRIP MONSTERMAN GRIPS More Detail

    AR-15 MONSTERMAN GRIP MONSTERMAN GRIPS

    Click here for price!$44.99Click here for price!$44.99

    Eliminates The Pistol Grip To Comply With California LawReplaces the pistol grip to make an AR-15 fitting with an A2-type, non-adjustable buttstock meet the requirements of California Penal Code 12276.1(a)(1)(A). Gives the rifle a "sporter" look and feel. Rounded edges and aggressive surface texturing give your hand a comfortable yet secure grasp. Uses existing grip screw. AR-15, Issue:11, Page:056 Big Book Catalog, Issue:69, Page:056

    HOT!
  • M-LOK VERTICAL GRIP MAGPUL More Detail

    M-LOK VERTICAL GRIP MAGPUL

    Click here for price!$21.80Click here for price!$21.80

    The M-LOK MVG is a light weight vertical foregrip that attaches directly to M-LOK compatible hand guards and forends. The M-LOK MVG is made from the same high quality polymer as other Magpul products, and uses the new Magpul TSP texture for positive control in all environments. With rounded contours and a shorter length, the M-LOK MVG has been optimized for use with the “thumb break method” of shooting and can also be used as a traditional vertical foregrip. AR-15, Issue:11, Page:058 Big Book Catalog, Issue:69, Page:058

    HOT!
  • AR-15 MOD-0 GUNFIGHTER GRIP BRAVO COMPANY More Detail

    AR-15 MOD-0 GUNFIGHTER GRIP BRAVO COMPANY

    Click here for price!$25.99Click here for price!$25.99

    For Maximum Control In Modern Gunfighting Stances Reduced angle, ergonomically enhanced grips are designed to improve rifle control for shooters preferring the modern, “squared off” stance. Constructed of durable, impact-resistant polymer, they feature a texturized surface for a sure-hold and a water-resistant, hinged door that opens to reveal a small compartment capable of storing batteries or other small items. Two included modular triggerguard inserts (smooth and extended) may be used to close the gap between the triggerguard and grip depending on your preference; inserts also work well on rifles with larger triggerguards. MOD-0 model is similar in size to the standard A1/A2-style grip. AR-15, Issue:11, Page:055 Big Book Catalog, Issue:69, Page:055

    HOT!
  • AR-15 SUREGRIP TACTICAL DELUXE GRIP ERGO GRIPS More Detail

    AR-15 SUREGRIP TACTICAL DELUXE GRIP ERGO GRIPS

    Click here for price!$39.00Click here for price!$39.00

    The Tactical Deluxe is a larger, heavier AR grip with a more pronounced palm swell than the standard Ergo grip. The finger grooves and backstrap areas of this grip are smooth SureGrip, and the side panels have a finely textured, sticky SureGrip finish. Grip is impervious to oils and solvents, provides a superior gripping surface when wet or with gloves on, and is ambidextrous. Outstanding grip for shooters with larger hands. Does not include mounting hardware. Sinclair, Issue:5B, Page:251

    HOT!
  • M-LOK ANGLED FORE GRIP MAGPUL More Detail

    M-LOK ANGLED FORE GRIP MAGPUL

    Click here for price!$25.60Click here for price!$25.60

    The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware. Allowing for a wider range of mounting location options, the M-LOK AFG is ¾" shorter than the AFG-2 while maintaining a similar gripping surface area. Even though the M-LOK AFG is more compact than its predecessors it continues to take into account natural body mechanics to provide a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the M-LOK AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. AR-15, Issue:11, Page:059 Big Book Catalog, Issue:69, Page:059

    HOT!
  • AR-15 SUREGRIP TACTICAL DELUXE GRIP ERGO GRIPS More Detail

    AR-15 SUREGRIP TACTICAL DELUXE GRIP ERGO GRIPS

    Click here for price!$58.00Click here for price!$58.00

    Hand-filling, ergonomic profile with finger grooves, palm swells, and many other features improves shooting comfort and accuracy. Upward-curved, grip extension fills the web of the shooting hand, spreads recoil over a large area for excellent feel and comfort. Tactical Deluxe w/Palm Shelf features palm shelf that adjusts vertically ½" providing a custom fit for maximum recoil control. All models feature textured finish. SureGrip adds an overmolded, rubberized covering to the polymer body for a superior grip and added cushion. AR-15, Issue:11, Page:056 Big Book Catalog, Issue:69, Page:056 Sinclair, Issue:5B, Page:251

    HOT!
  • AR-15 SUREGRIP ERGO GRIP ERGO GRIPS More Detail

    AR-15 SUREGRIP ERGO GRIP ERGO GRIPS

    Click here for price!$25.50Click here for price!$25.50

    Hand-filling, ergonomic profile with finger grooves, palm swells, and many other features improves shooting comfort and accuracy. Tactical grips feature either Suregrip or Rigid grip for a non-slip, textured finish. Suregrip adds an overmolded, rubberized covering to the polymer body for a superior grip and added cushion. Rigid grip features Rhino Hide™, a hard textured finish molded directly into the polymer. Right-Hand models have a distinct thumb shelf. Models available with Suregrip or Rigid textured finish. AR-15, Issue:11, Page:056 Big Book Catalog, Issue:69, Page:056

    HOT!
  • AR-15 MOE K2 GRIP MAGPUL More Detail

    AR-15 MOE K2 GRIP MAGPUL

    Click here for price!$19.90Click here for price!$19.90

    The MOE-K2 is a drop in upgrade for AR15/M4 pistol grips with a more vertical grip angle optimized for short LOP weapons, such as PDW (Personal Defense Weapons) configurations. It has an aggressive texture for positive weapon control and is compatible with Magpul Grip Cores for storage customization. This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the 'beaver tail' and the receiver. This gap is purely aesthetic and will not affect function. AR-15, Issue:11, Page:057 Big Book Catalog, Issue:69, Page:057

    HOT!
  • PICATINNY MODULAR COMBAT GRIP TROY INDUSTRIES, INC. More Detail

    PICATINNY MODULAR COMBAT GRIP TROY INDUSTRIES, INC.

    Click here for price!$64.99 - $69.99Click here for price!$64.99 - $69.99

    Easily Converts From Full-Length To Stubby ConfigurationDeeply knurled vertical forend grip provides a comfortable, secure grasp for outstanding recoil control and ultra-fast pointability. Modular design lets you choose a secure, full-palm configuration, or by unscrewing and removing the center section, a low-profile “stubby” grip. Full-length, spring-loaded locking bar, plus front and rear rail lugs ensure a rock-solid installation on any Picatinny rail. Flush-fit crossbolt to minimize risk of snagging on other gear. Rugged, all-aluminum construction with waterproof O-ring seals to keep contents of the roomy internal storage compartment dry. AR-15, Issue:11, Page:058 Big Book Catalog, Issue:69, Page:057

    HOT!
  • AR-15 MOD-3 GUNFIGHTER GRIP BRAVO COMPANY More Detail

    AR-15 MOD-3 GUNFIGHTER GRIP BRAVO COMPANY

    Click here for price!$17.99Click here for price!$17.99

    Reduced angle, ergonomically enhanced grips are designed to improve rifle control for shooters preferring the modern, “squared off” stance. Constructed of durable, impact-resistant polymer, they feature a texturized surface for a sure-hold and a water-resistant, hinged door that opens to reveal a small compartment capable of storing batteries or other small items. Two included modular triggerguard inserts (smooth and extended) may be used to close the gap between the triggerguard and grip depending on your preference; inserts also work well on rifles with larger triggerguards.  AR-15, Issue:11, Page:055 Big Book Catalog, Issue:69, Page:055

    HOT!
  • KEYMOD BCMGUNFIGHTER SHORT VERTICAL GRIP BRAVO COMPANY More Detail

    KEYMOD BCMGUNFIGHTER SHORT VERTICAL GRIP BRAVO COMPANY

    Click here for price!$39.99Click here for price!$39.99

    Quick detachable, Patent Pending, Tool-less, Direct Mount Keymod interface. Low-profile length for increased mobility and decreased “snag” factor. The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle. Can be mounted in reverse angle to increase control when grabbing handguard and grip. Flat sides give better yaw control during firing and non-firing manipulations. Aggressive texture. Storage inside the grip. Requires three Keymod attachment hole mounting points. Spring-loaded clamps make installation and removal easier. AR-15, Issue:11, Page:057 Big Book Catalog, Issue:69, Page:057

    HOT!
  • KEYMOD BCMGUNFIGHTER MOD 3 VERTICAL GRIP BRAVO COMPANY More Detail

    KEYMOD BCMGUNFIGHTER MOD 3 VERTICAL GRIP BRAVO COMPANY

    Click here for price!$18.99Click here for price!$18.99

    Low-profile length for increased mobility and decreased “snag” factor. The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle. Can be mounted in reverse angle to increase control when grabbing handguard and grip. Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations. Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces. AR-15, Issue:11, Page:057 Big Book Catalog, Issue:69, Page:057

    HOT!
  • CZ SCORPION EVO 3 S1 OPTIMIZED PISTOL GRIP APEX TACTICAL SPECIALTIES INC. More Detail

    CZ SCORPION EVO 3 S1 OPTIMIZED PISTOL GRIP APEX TACTICAL SPECIALTIES INC.

    Click here for price!$23.70Click here for price!$23.70

    The Apex Optimized Grip for the CZ Scorpion EVO 3 S1 changes the contour and angle from the standard factory grip.  The Apex Optimized Grip allows better control with a more comfortable angle for easier manipulation of the trigger and safety.  The grip is made from glass filled nylon, and comes with optional laser cut, self-adhesive grip tape.  Utilizes the factory grip screw for installation. Works with all CZ Scorpion EVO 3 S1 pistols and carbines.

    HOT!
  • KEYMOD BCMGUNFIGHTER KAG ANGLED GRIP BRAVO COMPANY More Detail

    KEYMOD BCMGUNFIGHTER KAG ANGLED GRIP BRAVO COMPANY

    Click here for price!$18.99Click here for price!$18.99

    Designed to complement modern shooting grips, the Kinesthetic Angled Grip (KAG) uses a biomechanically efficient forward rake to create an interface for positive retention and joint relief to the wrist, elbow, and shoulder, allowing for smooth weapon manipulation without substantial increase to the girth of the weapon system. Textured on both front and back, the profile of the KAG creates a channel for consistent and positive engagement which translates directly into improved efficiency in weapons manipulation and target to target transitions.

    HOT!
  • AR-15 PISTOL GRIP DANIEL DEFENSE More Detail

    AR-15 PISTOL GRIP DANIEL DEFENSE

    Click here for price!$28.00Click here for price!$28.00

    The Daniel Defense Pistol Grips feature a soft touch overmolded gripping area, allowed for improved retention and comfort.  Ergonomic design follows the class 1911 grip angle, for superior comfort, especially when shooting with a collapsed stock.  Integrated trigger guard simplifies trigger guard installation, and allows for a larger trigger area.  Available in black or DD Milspec+ brown. Big Book Catalog, Issue:69, Page:056

    HOT!

Subscribe our newsletter

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Ex, velit!