• 1911 TRIGGER PULL KITS CYLINDER & SLIDE More Detail

    1911 TRIGGER PULL KITS CYLINDER & SLIDE

    Click here for price!$99.99 - $179.99Click here for price!$99.99 - $179.99

    Match Quality Trigger Pull In A Drop-In KitEach kit is tested on a Series 70-style frame to make certain it will produce the specified pull weight with little or no fitting. Parts are wire EDM cut from bar stock, honed and polished, then heat treated for years of service life. All profiles and through-holes are mechanically correct to function without hand fitting. Sear nose has correct relief angle, sear spring is narrowed to reduce pull weight. Exposed hammer edges on Ultra-Light, Super?Match and Tactical II are chamfered to minimize slide drag and clothing wear. Each kit contains a hammer, sear, disconnector, sear spring and hammer spring. ULTRA LIGHT KIT - 3.5 lb. pull weight. Ultra light, skeletonized, hammer; relieved to prevent frame rub. Ultra light match sear and disconnector. Lightened sear spring, 18 lb. hammer spring. ULTRA LIGHT SPEED II KIT - 3 lb. pull weight. Low-profile, skeletonized hammer relieved to prevent frame rub; ultra-light weight cuts lock time to a minimum. Deep, crisp serrations ensure secure thumb contact for fast, positive cocking. Properly matched spring weights give the specified pull weight and ensure positive ignition. SUPER MATCH KIT - 3.5 lb. pull weight. Ultra match, lightened hammer. Relieved to prevent frame rub. Ultra light match sear and disconnector. Light pull sear spring, 18 lb. hammer spring. TACTICAL II KIT - 4 lb. pull weight. Tactical II hammer with relieved sides, ultra match sear and disconnector, light sear spring, 18 lb. hammer spring. TACTICAL MATCH KIT - 4.5 lb. pull weight. Tactical hammer, sear, disconnector, light pull sear spring, 18 lb. hammer spring. Great for carry guns. WARP SPEED KIT - 3 lb. pull weight. Very low mass hammer, relieved to prevent frame rub. Low mass sear and disconnector, 18 lb. hammer spring, light pull sear spring. DUTY/CARRY KIT - 4½ lb. pull weight for duty or carry pistols. Comes with classic, military-style spur hammer, for those who prefer that style or are required to have it on duty weapons. Includes sear, disconnector, 23 lb. hammer spring, and sear spring. PROFESSIONAL KIT - 5 lb. of pull weight and is designed for military and police shooters. Gives complete trigger control in high-stress situations. Contains hammer, sear, disconnector, 23 lb. hammer spring and tactical sear spring. 1911, Issue:11, Page:018 Big Book Catalog, Issue:69, Page:111 Sinclair, Issue:1A, Page:002 Sinclair, Issue:1A, Page:016 Sinclair, Issue:1A, Page:017

    HOT!
  • P220/P226/P229/P239 SHORT RESET TRIGGER KITS SIG SAUER More Detail

    P220/P226/P229/P239 SHORT RESET TRIGGER KITS SIG SAUER

    Click here for price!$50.99 - $53.99Click here for price!$50.99 - $53.99

    Factory Sig Sauer kits reduce the reset distance on Sig P239, P226, P229 & P220 pistols.  Kits include all parts needed to improve your trigger pull.  Sig Sauer P239 kit includes new safety lever, sear & trigger bar spring.  Sig Sauer P226 & P229 kit includes new sear & safety lever.  Sig Sauer P220 kit includes new decocking lever, safety lever & sear. Big Book Catalog, Issue:69, Page:227

    HOT!
  • S&W M&P ACTION ENHANCEMENT COMPONENTS APEX TACTICAL SPECIALTIES INC. More Detail

    S&W M&P ACTION ENHANCEMENT COMPONENTS APEX TACTICAL SPECIALTIES INC.

    Click here for price!$92.99 - $97.99Click here for price!$92.99 - $97.99

    Drop-In Upgrade Parts Improve Trigger Pull For Competition Or Carry Drop-in replacements for factory components enhance reliability and optimize the performance of your M&P for different applications. Installing the Competition Kit yields a smooth, consistent, trigger pull of slightly less than 3 lbs., with shorter over-travel and faster reset than a factory-stock M&P. Retain the factory sear spring to get a slightly heavier 3½ lb. pull. Designed for IDPA, USPSA, Steel Challenge, 3-gun, and similar types of action shooting competition. Not for duty, carry, or self-defense applications. Duty/Carry Kit delivers a smooth, consistent 5½ lb. trigger pull with less over-travel and shorter reset. Improves performance of your pistol while maintaining its safety features for daily carry. Retain the factory sear spring to get a slightly lighter 5 lb. pull. Both kits engineered for a drop-in fit, though gunsmith installation is recommended. Big Book Catalog, Issue:69, Page:225

    HOT!
  • 1911 AUTO HD-120 EXTREME SERVICE IGNITION COMPONENTS HARRISON DESIGN & CONSULTING More Detail

    1911 AUTO HD-120 EXTREME SERVICE IGNITION COMPONENTS HARRISON DESIGN & CONSULTING

    Click here for price!$23.99 - $139.99Click here for price!$23.99 - $139.99

    Hardened Tool Steel Components For Durability, Reliability & Precise Fit Critical ignition parts are machined from high-grade tool steel for precise fit and reliable, consistent function under the most demanding operating conditions. Each component is wire-EDM cut, CNC machined and honed to final dimensions with +/-.005" tolerances for drop-in fit on many 1911s, then heat-treated to Rc 53-56 to maintain those dimensions through thousands of firing cycles. Hammer hooks are pre-prepped and sear nose polished for precise contact and crisp, clean letoff. Commander-style hammer has elongated spur with deep serrations to provide extra-secure thumb purchase. Beveled edges resist snagging on clothing and protect the thumb from abrasion, and slightly narrower hammer body prevents unwanted slide contact. HD-120 set includes hammer, sear, and disconnector. Each component also available separately. HD-120B set features a black IonBond DLC coating on the hammer, for those who prefer the traditional “blued” look combined with wear- and corrosion-resistance similar to hard-chrome. HD-120TR set has a True Radius sear with the primary surface precision-ground and polished to an engineered radius located from the center of the sear pin. It comes with a correctly shaped and sized escape angle. 1911, Issue:11, Page:018 Big Book Catalog, Issue:69, Page:111 Sinclair, Issue:1A, Page:017

    HOT!
  • 1911 3-PIECE DROP-IN TRIGGER PULL SET CYLINDER & SLIDE More Detail

    1911 3-PIECE DROP-IN TRIGGER PULL SET CYLINDER & SLIDE

    Click here for price!$99.99 - $139.99Click here for price!$99.99 - $139.99

    Available In Two Configurations To Fit Your Specific Shooting Needs Commander-style hammer, Tactical sear, and Ultra Match disconnector drop-in to deliver reliable ignition and improved trigger function on any 1911 auto. Each component is precision EDM cut to ±.0005" tolerances from Cylinder & Slide’s Special Tool Steel. All parts are honed and polished, then heat-treated to Rc 50-53 for long service life. Tactical II Set features the popular Tactical II chamfered hammer in-the-white with standard .018" long hammer hooks for a match-grade trigger pull. Available in Tool Steel or high-grade Stainless Steel alloy. MARSOC Set includes a blued Tactical II-style hammer with longer .023" hammer hooks for added sear engagement and maximum reliability. Used in the U.S. Marine Corps MARSOC service pistols. Added material on the hooks allows fitting by the pistolsmith to achieve a truly custom trigger pull. 1911, Issue:11, Page:017 Big Book Catalog, Issue:69, Page:110 Big Book Catalog, Issue:69, Page:111 Sinclair, Issue:1A, Page:016

    HOT!
  • 1911 DROP-IN TRIGGER JOB NOWLIN More Detail

    1911 DROP-IN TRIGGER JOB NOWLIN

    Click here for price!$134.99 - $149.99Click here for price!$134.99 - $149.99

    A Professional Trigger Pull Without The Work Ready-to-drop-in parts put an ultra-smooth, clean breaking, professional quality trigger job in your 1911 Auto in only minutes. Fully prepared hammer and pre-ground, pre-polished sear, plus springs and fully-machined disconnector, will install into most models of 1911 Autos with little or no fitting required. Helps promote better trigger control and improved accuracy. Pro Match  - features wire EDM’d hammer and sear that are double heat treated, then finish ground for outstanding durability - 3 1/2 lb. pull weight. Commander Match - Carry Defense Style! A professional 4 lb. trigger pull. 1911, Issue:11, Page:019 Big Book Catalog, Issue:69, Page:112 Sinclair, Issue:1A, Page:017

    HOT!
  • SPRING KITS FOR NEW MODEL RUGER® SINGLE ACTION REVOLVERS BROWNELLS More Detail

    SPRING KITS FOR NEW MODEL RUGER® SINGLE ACTION REVOLVERS BROWNELLS

    Click here for price!$7.99 - $19.99Click here for price!$7.99 - $19.99

    "Guaranteed Superior" An excellent base from which to build a beautiful, smooth and reliably functioning gun. Includes a redesigned trigger spring and a reduced power hammer spring to give controlled trigger pull. Also includes extra power, base pin latch spring. Factory hammer spring is 23 lb. Kit includes (3) different, reduced power hammer springs; 17 , 18 & 19 lb. (Factory is 23 lb.), (1) 35% reduced power trigger spring, plus (1) extra power base pin latch spring. Springs fit the New Single Six®, New Blackhawk®, Super Blackhawk®, Maximum Blackhawk®, Bisley™, Vaquero® and Bisley Vaquero. Big Book Catalog, Issue:69, Page:232 Big Book Catalog, Issue:69, Page:233

    HOT!
  • 1911 TRIGGER PULL SET ED BROWN More Detail

    1911 TRIGGER PULL SET ED BROWN

    Click here for price!$99.99 - $104.99Click here for price!$99.99 - $104.99

    These Trigger Pull Kits include the Ed Brown parts needed for superior trigger function. The machined-from-barstock hammer features a long list of custom modifications for a match-quality trigger pull without a lot of work. Sear hooks are cut to height, then precision surface ground so just a light stoning is all that's necessary to achieve a crisp, clean-breaking trigger pull. Half-cock notch is narrowed to help prevent sear damage and pin holes are CNC-machined for location; lowered strut pin hole reduces full-cock spring pressure. Narrowed spur minimizes slide drag; larger-than-factory, Commander-style opening reduces weight for a fast fall and even faster locktimes. Fully-chamfered edges eliminate sharp points that can abrade clothing and skin. The disconnector is designed to work with Ed Brown’s Perfection Sear and Hardcore Hammer for crisp, high performance trigger jobs. Heat treated for super durability in rugged service. All machined surfaces are finished and dimensionally precise to ensure perfect fit and smooth functioning. Gunsmith installation required. The Perfection Sear is pre-fit to provide the least amount of hand work prior to installation. Primary angle is already cut; simply stone the correct relief angle and install. 1911, Issue:11, Page:017 Big Book Catalog, Issue:69, Page:110

    HOT!
  • 1911 ULTRA LITE HAMMER CYLINDER & SLIDE More Detail

    1911 ULTRA LITE HAMMER CYLINDER & SLIDE

    Click here for price!$98.99 - $160.99Click here for price!$98.99 - $160.99

    Premium-Quality Parts To Produce A Long-Wearing, Match Quality Trigger PullSkeletonized for low mass and faster lock time without sacrificing long wearability and strength. 2 lb. trigger pulls can be achieved without shortening the hooks below .018". All engagement surfaces are highly polished and ready for installation. Ultra Lite components are CNC machined from aerospace-quality, maraging alloy tool steel that's age- hardened to prevent stress, warpage and tolerance loss. All profiles are mechanically correct, through-holes are properly aligned so they function the first time without time consuming fitting. Exposed hammer edges are chamfered to minimize slide drag and clothing wear. Set contains the Ultra Lite Hammer plus matching Sear and Disconnector. 1911, Issue:11, Page:017 Big Book Catalog, Issue:69, Page:110 Sinclair, Issue:1A, Page:017

    HOT!
  • TRIGGER GROUP COMPETITION PAK for GLOCK® WOLFF More Detail

    TRIGGER GROUP COMPETITION PAK for GLOCK® WOLFF

    Click here for price!$9.00Click here for price!$9.00

    Easily Improve & Lighten Trigger Pull Without Permanent Modifications Contains the correctly calibrated springs you need to lower pull weight and improve trigger pull quality of your Glock® pistol without complicated gunsmithing or permanent alterations. Installing this kit will not disable or diminish the effectiveness of the well-proven Glock® Safety System. Designed specifically to meet the needs of competitive shooters; this alteration is not recommended for duty pistols. “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products. Big Book Catalog, Issue:69, Page:223

    HOT!
  • HIGH PERFORMANCE KIT FOR THE RUGER® MARK III® 22/45 TANDEMKROSS More Detail

    HIGH PERFORMANCE KIT FOR THE RUGER® MARK III® 22/45 TANDEMKROSS

    Click here for price!$99.99Click here for price!$99.99

    The TANDEMKROSS High Performance Kit will transform your 22/45 from good to incredible. This kit is loaded with essential drop in precision parts made right here in the America.  Don’t settle for anything less than high performance!   Compatible with ANY Ruger MKIII 22/45! Stainless Steel Hammer Bushing Removes magazine disconnect and reduces fail to feeds Allows magazines to drop free Simplifies disassembly and cleaning “Eagle’s Talon” Precision Extractor Reduces fail to extract and “stove pipe” malfunctions Precision made (not stamped) Sharpened positive hook with adjusted angle Loaded Chamber Indicator Filler Removes Loaded Chamber Indicator feature Reduces fail to feed Greatly simplifies chamber cleaning “Kanewolf” Slingshot Bolt Plate Allows “sling shot” action when the bolt is locked back Reduces wear on the bolt face and bolt plate Does not interfere with last round hold open “Fire Starter” Titanium Firing Pin Performance grade titanium Non-corrosive and highly durable 40% lighter than steel and reduces lock time Extended Magazine Release 20% longer than original magazine release Eyes free, easy to find control Perfect compliment to thick grips

    HOT!
  • S&W SHIELD 45 DUTY/CARRY KIT APEX TACTICAL SPECIALTIES INC. More Detail

    S&W SHIELD 45 DUTY/CARRY KIT APEX TACTICAL SPECIALTIES INC.

    Click here for price!$75.99Click here for price!$75.99

    Apex Fully Machined Sear: Reduces trigger pull weight and reduces over travel. Apex Shield 45 Duty/Carry Spring Kit: The Trigger return spring sets the trigger pull weight into the 5-5.5lb. range; Striker Block Spring provides a smooth uptake and reset; Sear Spring aids in returning the Sear to its ready to fire position and maintains trigger pull weight; Shield Slave Pin is used to hold tension on the trigger return spring during installation. Expected results: Reduces trigger pull Reduces trigger pre-travel and over-travel Smooth uptake and reset Applicable to what guns: Works with all Smith & Wesson M&P Shield 45 Pistols Works in conjunction with the Apex Shield 45 Action Enhancement Trigger, or as a stand-alone with the factory trigger.  

    HOT!
  • 1911 DELUXE COMPLETION KIT PRACTICAL SHOOTING SUPPLIES More Detail

    1911 DELUXE COMPLETION KIT PRACTICAL SHOOTING SUPPLIES

    Click here for price!$55.00 - $59.99Click here for price!$55.00 - $59.99

    Every Pin & Spring You Need For Building A 1911 AutoComplete and convenient kit has every pin and spring you need when building, or rebuilding, a 1911 Auto pistol. All are made from premium, heat-treated carbon or stainless steels. Oversized hammer and sear pin are ground to maximum diameter on the 1911 print for a close fit in worn, frame-pin holes. 1911, Issue:11, Page:034 Big Book Catalog, Issue:69, Page:126 Sinclair, Issue:1A, Page:032

    HOT!
  • M&P SPRING KITS APEX TACTICAL SPECIALTIES INC. More Detail

    M&P SPRING KITS APEX TACTICAL SPECIALTIES INC.

    Click here for price!$20.99 - $25.99Click here for price!$20.99 - $25.99

    Drop-In Upgrade Parts Improve Trigger Pull For Competition Or Carry Drop-in replacements for factory components enhance reliability and optimize the performance of your M&P for different applications. Same springs found in the Action Enhancement Kits can be used as high-quality replacements for worn or tired factory springs. Duty/Carry Spring Kit includes a trigger return spring, a slave pin to aid in installing the return spring and one sear spring. Competition Spring Kit adds a competition striker spring and gives a 3 lb. trigger pull when used with the Hard Sear and Ultimate Striker Kit. Big Book Catalog, Issue:69, Page:225

    HOT!
  • 17113 RUGER® SP-101® KIT WOLFF More Detail

    17113 RUGER® SP-101® KIT WOLFF

    Click here for price!$9.79Click here for price!$9.79

    Gives Smoother, Lighter Trigger Pull Contains (1) 9 lb., (1) 10 lb., and (1) 12 lb. reduced power hammer spring for tailoring trigger pull.Includes (1) 8 lb. reduced power trigger return spring. Does not fit SP101 .22 manufacturered during & after 2011. Big Book Catalog, Issue:69, Page:233

    HOT!
  • NEW VAQUERO/ANNIVERSARY BLACKHAWK SHOOTERS PAKS WOLFF More Detail

    NEW VAQUERO/ANNIVERSARY BLACKHAWK SHOOTERS PAKS WOLFF

    Click here for price!$13.50 - $13.99Click here for price!$13.50 - $13.99

    For A Smooth Action, Fast Follow-Up Shots, Helps Improve Accuracy Give your New Vaquero®, 50th Anniversary Blackhawk®, or other Ruger single-action revolver, a lighter cocking pull and ultra-smooth trigger with these easy-to-install, high-grade replacements for the factory springs. No time-consuming honing, filing, and other reworking of parts. These precision action springs are carefully manufactured for easy fitting to your revolver with only minor disassembly. Reduced power springs make cocking easier, lighten trigger pull, and improve accuracy. Kits include reduced power, 14 lb. hammer spring for easier cocking, and a choice of light 30 oz. or 40 oz. trigger spring, plus extra-power base pin latch spring for positive cylinder latching. Big Book Catalog, Issue:69, Page:233

    HOT!
  • 1911 RETRO HAMMER & IGNITION SET HARRISON DESIGN & CONSULTING More Detail

    1911 RETRO HAMMER & IGNITION SET HARRISON DESIGN & CONSULTING

    Click here for price!$87.99 - $159.99Click here for price!$87.99 - $159.99

    Low-profile, “bite free” hammer spur prevents hammer pinch even when used with the standard 1911A1 grip safety. “Retro” design has the look of a bobbed 1911A1 hammer. Available alone or in a kit with top-quality machined sear and disconnector. All components precision machined from tool steel, heat treated, and polished for optimum fit and durability. Primary and breakaway angles on the sear are prepped and ready to go, but can be gunsmith modified to change trigger pull if desired. 1911, Issue:11, Page:018 Big Book Catalog, Issue:69, Page:111

    HOT!
  • #246 RUGER GP100 SPRING KIT WILSON COMBAT More Detail

    #246 RUGER GP100 SPRING KIT WILSON COMBAT

    Click here for price!$9.99Click here for price!$9.99

    Add Reliability, Improve FunctionHigh quality springs drop-in to improve handgun performance. High tensile strength wire delivers reliable function. #246 Ruger GP-100 - RP 9, 10, and 12 lb. hammer springs; RP 8 and 10 lb. trigger return spring. Big Book Catalog, Issue:69, Page:233

    HOT!
  • SERIES 80 TRIGGER PULL REDUCTION KIT CYLINDER & SLIDE More Detail

    SERIES 80 TRIGGER PULL REDUCTION KIT CYLINDER & SLIDE

    Click here for price!$47.99Click here for price!$47.99

    Super-Slick Parts Lighten The Series 80 PullTitanium-nitrided parts, with an exclusive moly-disulfide coating, reduce trigger pull weight without risky modifications to Series 80 Colt's firing pin safety system. Reduces the creep and jump in the takeup that's inherent in these guns. When used with custom, after-market parts, trigger pulls as low as 2- lbs. can be safely achieved without hammer-follow. 1911, Issue:11, Page:030 Big Book Catalog, Issue:69, Page:122 Sinclair, Issue:1A, Page:028

    HOT!
  • 1911 IGNITION SET WITH COMMANDER HAMMER HARRISON DESIGN & CONSULTING More Detail

    1911 IGNITION SET WITH COMMANDER HAMMER HARRISON DESIGN & CONSULTING

    Click here for price!$85.99 - $158.99Click here for price!$85.99 - $158.99

    Manufactured from top grade tool steel to provide precise fit and reliable, consistent function under the most demanding conditions. Each part is wire EDM'd and CNC machined for a precise +/- .0005" tolerance then heat treated to Rc 53 - 56, then honed and mirror polished to give Extreme Service in your pistol. The hammer is slightly narrowed to avoid unwanted contact with the slide or ejector and features the standard original round hole configuration. The spur has deep serrations to help you keep the hammer under control and all exterior corners are CNC machine beveled to minimize snagging and abrasion. The sear is shaped to minimize excess material, reducing weight. The sear nose features a polished primary angle and breakaway angle. Fully polished surfaces mean smooth operation in the points of contact between the disconnector, sear and hammer. Available in the white or with an IonBond Black hammer. 1911, Issue:11, Page:018 Big Book Catalog, Issue:69, Page:111

    HOT!
  • BERETTA 92/96 RECOIL SPRINGS WOLFF More Detail

    BERETTA 92/96 RECOIL SPRINGS WOLFF

    Click here for price!$7.89 - $24.99Click here for price!$7.89 - $24.99

    For optimum reliability with hardball and hot handloads. Improves overall function by matching the spring to the specific loads being fired. 13lb., factory standard weight, recoil spring only. Recoil Calibration Pak: - 1 each 15 lb., 16 lb., 18 lb., and 20 lb. extra power recoil springs, plus (3) extra power firing pin springs. Performance Pak: - 1 each 10 lb. reduced power, and (1) 15 lb. extra power recoil spring, plus (1) extra power, firing pin spring and (1) 18 lb. reduced power hammer spring. Big Book Catalog, Issue:69, Page:223

    HOT!
  • SAA SHOOTERS PAK WOLFF More Detail

    SAA SHOOTERS PAK WOLFF

    Click here for price!$23.99Click here for price!$23.99

    Unique Design Smooths Action, Reduces Trigger PullComplete set of springs to improve reliability, smooth trigger pull, and improve accuracy. Includes reduced power mainspring and sear/bolt spring, extra power base pin spring, stainless steel ejector spring. Wire features wire sear/bolt spring; flat uses traditional flat sear/bolt spring. Big Book Catalog, Issue:69, Page:233

    HOT!
  • RGP-103 PRO-SPRING KIT FOR RUGER® GP-100® BROWNELLS More Detail

    RGP-103 PRO-SPRING KIT FOR RUGER® GP-100® BROWNELLS

    Click here for price!$11.84Click here for price!$11.84

    "Guaranteed Superior"Kit contains (3) reduced power hammer springs, 9, 10 and 12 lb. (factory is 14 lb.), plus (2) reduced power trigger springs, 8 and 10 lb. (factory is 11 lb.). Gives choice of best springs for individual gun. Reduces, smooths hammer actuation and trigger pull, yet ensures reliability on factory issued or professionally tuned guns. Big Book Catalog, Issue:69, Page:232

    HOT!
  • #322 BERETTA 92F SPRING KIT WILSON COMBAT More Detail

    #322 BERETTA 92F SPRING KIT WILSON COMBAT

    Click here for price!$14.99Click here for price!$14.99

    Add Reliability, Improve FunctionHigh quality springs drop-in to improve handgun performance. High tensile strength wire delivers reliable function. #322 Beretta 92F - RP 18 lb. hammer spring; XP firing pin spring; RP 10 lb. and XP 15 lb. recoil springs. Big Book Catalog, Issue:69, Page:222

    HOT!

Subscribe our newsletter

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Ex, velit!