• AR-15 KAK SHOCKWAVE BLADE PISTOL BRACE KAK INDUSTRY LLC. More Detail

    AR-15 KAK SHOCKWAVE BLADE PISTOL BRACE KAK INDUSTRY LLC.

    Click here for price!$48.95 - $49.95Click here for price!$48.95 - $49.95

    Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). No special receiver extension needed. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation. This veteran-designed and U.S.A.-manufactured shooting aid improves your marksmanship by providing additional support of your pistol while you still hold and operate it with one hand. The Blade incorporates a vertical “fin,” which you stabilize against the inside of your forearm when in the firing position. Or, you can stabilize the Blade against your cheek for a perfect, steady sight picture. Features: Fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter)—AR pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc. Available in Black, Flat Dark Earth, OD Green and Grey Quick and easy to install Provides additional support during firing Weighs a scant 5.0 ounces ATF approved for pistol use Veteran designed, engineered, marketed, and sold Made in U.S.A.  

    HOT!
  • GUIDE ROD ASSEMBLY for GLOCK® LONE WOLF DIST. More Detail

    GUIDE ROD ASSEMBLY for GLOCK® LONE WOLF DIST.

    Click here for price!$23.99Click here for price!$23.99

    Stainless Steel Prevents Rod Flex & Spring Bind For More Reliable Cycling Hardened stainless steel guide rod won’t break or flex and bind the spring like the factory plastic rod. Helps prevent cycling problems, improves reliability and overall performance. Features a captured, ISMI chrome silicon flat spring that’s heat-treated, shot peened, and calibrated to the factory-spec 17 lb. weight. Steel Allen head screw and washer secure the spring to the rod, yet enable easy disassembly for spring replacement. “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products. Big Book Catalog, Issue:69, Page:212

    HOT!
  • KAK SHOCKWAVE PISTOL BRACE PACKAGE KAK INDUSTRY LLC. More Detail

    KAK SHOCKWAVE PISTOL BRACE PACKAGE KAK INDUSTRY LLC.

    Click here for price!$95.00Click here for price!$95.00

    Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). No special receiver extension needed. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation. This veteran-designed and U.S.A.-manufactured shooting aid improves your marksmanship by providing additional support of your pistol while you still hold and operate it with one hand. The Blade incorporates a vertical “fin,” which you stabilize against the inside of your forearm when in the firing position. Or, you can stabilize the Blade against your cheek for a perfect, steady sight picture. Features: Fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter)—AR pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc. Available in black and flat dark earth (this listing is for black) Quick and easy to install Provides additional support during firing Weighs a scant 5.0 ounces ATF approved for pistol use Veteran designed, engineered, marketed, and sold Made in U.S.A. Includes: Shockwave Blade Pistol Stabilizer KAK Shockwave Tube Castle Nut Mil-Spec Endplate Carbine Buffer Spring Standard Carbine Buffer  

    HOT!
  • KAK SHOCKWAVE PISTOL BRACE & LAW TACTICAL FOLDING STOCK ADAPTER BROWNELLS More Detail

    KAK SHOCKWAVE PISTOL BRACE & LAW TACTICAL FOLDING STOCK ADAPTER BROWNELLS

    Click here for price!$364.99Click here for price!$364.99

    Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). No special receiver extension needed. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation. Law Tactical's steel adapter enables installation of a folding stock on any AR-15 to create a smaller-profile rifle for easy deployment from a vehicle or transport in non-permissive environments. Works with standard gas impingement OR gas piston system. Accepts A2, mil-spec M4-style, and commercial carbine receiver extension tube and almost any stock that fits them. Compatible with all standard bolt carrier groups, including full-auto and .308 size. Single-button operation for quick folding and unfolding and steel locking latch keeps stock securely in place when extended. Gen3-M has a lowered hinge to avoid interference when charging the weapon, and a setscrew keeps the adapter securely affixed to the receiver. Hinge tension is adjustable so you can choose how stiff the folding mechanism is. Includes special bolt carrier extension (no tools to install/remove). Current version utilizes standard buffer retaining pin and spring. Stock adapter features DLC coating. INCLUDES Shockwave Blade Pistol Stabilizer-Black KAK Shockwave Tube Castle Nut MIL-Spec Endplate Carbine Buffer Spring Standard Carbine Buffer Law Tactical Folding Stock Adapter  

    HOT!
  • RECOIL GUIDE ROD ASSEMBLY SMITH & WESSON More Detail

    RECOIL GUIDE ROD ASSEMBLY SMITH & WESSON

    Click here for price!$11.99Click here for price!$11.99

    FITS: M&P (Semi-Auto), 9mm, .357, .40 Big Book Catalog, Issue:68, Page:673

    HOT!
  • AR-15/M16 PISTOL BUFFER TUBE PHASE 5 TACTICAL More Detail

    AR-15/M16 PISTOL BUFFER TUBE PHASE 5 TACTICAL

    Click here for price!$49.95 - $69.99Click here for price!$49.95 - $69.99

    Foam-Covered Tube For A Custom AR-Style Pistol Machined aluminum buffer tube assembly gives your AR-style pistol a neat, finished look. Nitrile foam rest padding resists chemicals, abrasions and temperatures from -20° F to 220° F. Includes mil-spec endplate and castle nut; accepts a mil-spec carbine buffer and spring. AR-15, Issue:11, Page:042 Big Book Catalog, Issue:69, Page:040

    HOT!
  • KAK SHOCKWAVE TUBE KAK INDUSTRY LLC. More Detail

    KAK SHOCKWAVE TUBE KAK INDUSTRY LLC.

    Click here for price!$20.00Click here for price!$20.00

    Features -  12 length adjustment settings. Anti-rotation and anti-thrust design stays put without sliding forward or spinning. Tube is flush with rear of SHOCKWAVE BLADE when fully collapsed. When fully adjusted out the assembly is very rigid. Strong CASTLE NUT design accepts all mil spec endplates and any aftermarket endplate. Accepts all carbine buffer systems..

    HOT!
  • AR-15/M16 HEX 2 PISTOL BUFFER TUBES PHASE 5 TACTICAL More Detail

    AR-15/M16 HEX 2 PISTOL BUFFER TUBES PHASE 5 TACTICAL

    Click here for price!$59.99 - $79.99Click here for price!$59.99 - $79.99

    The Phase 5 Hex 2 pistol buffer tube has been specifically designed to utilize the Sig Sauer SB15 Pistol Stabilizing Brace. The Hex-2 is a heavy duty USA certified 7075 T7 billet aluminum pistol buffer tube with the versatility to use the Phase 5 nitrile Foam Pad (included) or the SB15 Pistol Stabilizing brace (sold separately). Working closely with Sig Sauer the Phase 5 Hex-2 was a special project that involved a number of firearms instructors, law enforcement professionals and AR Pistol enthusiasts alike. While asking questions along the way and updating the design based on the recommendations given by all; the Hex-2 has become the perfect component for any AR pistol build. Both the Hex 2 pistol buffer tube and Hex2 pistol buffer tube kit include a castle nut, end plate and foam pad. The Hex 2 pistol buffer tube kit also includes a Phase 5 Enhanced Buffer Spring and carbine buffer.  AR-15, Issue:11, Page:042 Big Book Catalog, Issue:69, Page:040

    HOT!
  • GOVERNMENT MODEL VARIABLE POWER RECOIL SPRING WOLFF More Detail

    GOVERNMENT MODEL VARIABLE POWER RECOIL SPRING WOLFF

    Click here for price!$7.89 - $43.99Click here for price!$7.89 - $43.99

    Variable rate springs function correctly with a wider range of loads than fixed rate springs can. Rate increases as spring is compressed; gives greater protection against frame battering, more consistent lockup and improved feeding, while allowing easier manual cycling of the action. Recoil Calibration Pak contains 1 each of seven different springs; 16 lb., 15 lb., 14 lb., 13 lb., 11 lb., 10 lb. and 9 lb., plus three extra power firing pin springs. Individual Spring Pak contains one variable power recoil spring and one extra power firing pin spring. Factory weight is 16 lb. 1911, Issue:11, Page:033 Big Book Catalog, Issue:69, Page:126 Sinclair, Issue:1A, Page:031

    HOT!
  • AR-15 PISTOL SBX STABILIZING ARM BRACE SIG SAUER More Detail

    AR-15 PISTOL SBX STABILIZING ARM BRACE SIG SAUER

    Click here for price!$167.99Click here for price!$167.99

    SIG SAUER offers the SBX Pistol Stabilizing Brace, an second generation to the SB15 Pistol Stabilizing brace, a shooter's aid that is designed to improve the single-handed shooting performance of buffer tube equipped pistols. The SBX features a more slim design with a thicker strap for extra stability. This veteran-designed accessory enhances accuracy and reduces felt recoil when using an AR-style pistol. Made from high-quality, elasto-polymer, the SBX15 is manufactured to close tolerances and fits all pistols equipped with an AR-style buffer tube 1.0” – 1.2” in diameter. The Pistol Stabilizing Brace uses the operator’s forearm to provide stable support, thereby minimizing accuracy-robbing spin and shift. A flexible cuff with two adjustable nylon straps allows the SBX15 to be custom fit to any user. ATF has reviewed this product and determined that attaching the SB15 to a handgun does not alter the classification of the firearm or subject the firearm to NFA control if the SB15 is used as designed—to assist shooters in stabilizing a handgun while shooting with a single hand. The Sig Stabilizing Brace is not to be used as a shoulder stock. Using the brace as a stock while installed on a pistol constitutes a “redesign” of the device according to the ATF and misuse of the brace may subject the user to severe criminal penalties. If used as a stock, the resulting firearm will be subject to all provisions of the NFA and all NFA rules would apply.

    HOT!
  • SB PDW ADJUSTABLE PISTOL STABILIZING BRACE SB TACTICAL More Detail

    SB PDW ADJUSTABLE PISTOL STABILIZING BRACE SB TACTICAL

    Click here for price!$239.99 - $255.99Click here for price!$239.99 - $255.99

    The SBPDW brings 3-position adjustability to the AR pistol. Compatible with standard bolt carrier groups and buffers, the SBPDW gives you all of the advantages of a pistol with improved control by adding a third point of contact for stabilization. Features: Complete Assembly 3-Position Adjustable Compatible with mil-spec BCG and carbine buffers Comes with adjustable nylon strap for custom fit ATF Compliant

    HOT!
  • RECOIL SPRING ASSEMBLY GLOCK More Detail

    RECOIL SPRING ASSEMBLY GLOCK

    Click here for price!$7.99Click here for price!$7.99

    FITS: Model 17, 9mm; Model 22, .40 S&W; Model 31, .357 SIG; Model 34, 9mm; Model 35, .40 S&W Recoil Spring Assembly - fits G17-G17R-G18-G22-G22P-G24-G31-G34-G35-G37 (silver spring - marked 5579 on end of recoil spring guide) “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products. Big Book Catalog, Issue:68, Page:606 Big Book Catalog, Issue:68, Page:607 Big Book Catalog, Issue:68, Page:608

    HOT!
  • TYPE A RECOIL SPRING FOR TARGET (SOFTBALL) LOADS WOLFF More Detail

    TYPE A RECOIL SPRING FOR TARGET (SOFTBALL) LOADS WOLFF

    Click here for price!$3.99 - $35.60Click here for price!$3.99 - $35.60

    Fine Tune For Light, Standard Or Heavy LoadsLike all Wolff springs, these for the 1911 Auto in .45, .38 Super or 9mm are the finest, most reliable, longest lasting ones available. The springs of choice for most of the nation's top builders. Except where noted, all recoil springs are supplied with an extra power firing pin spring that keeps the firing pin stop in place and prevents firing pin float; an addition recommended by pistolsmith Bill Wilson.TYPE A - For Target (Softball) Loads were originally recommended to us by Major F. B. Conway, U.S.A. - M.T.U. Whenever lighter than standard bullets or powder charges are being used, a lighter recoil spring is a must for correct functioning; however, they MUST NOT BE USED WITH STANDARD (HARDBALL) LOADS. The 10 lb. Type A spring is the old favorite (for reduced loads) and for that reason we also make it available as a single item (without the extra power firing pin spring). 1911, Issue:11, Page:033 Big Book Catalog, Issue:69, Page:125 Sinclair, Issue:1A, Page:031

    HOT!
  • 1911 RECOIL SPRING GUIDE WILSON COMBAT More Detail

    1911 RECOIL SPRING GUIDE WILSON COMBAT

    Click here for price!$29.99 - $36.99Click here for price!$29.99 - $36.99

    Eliminate Spring Kink & Bind; One-& Two-Piece Styles With a full-length guide rod in place giving no chance for recoil spring bind, a 1911 will chamber, cycle and extract more reliably. One-piece style available for Government/Gold Cup and Commander; Two-piece for Government/Gold Cup in both standard full-length and long slide for pistols equipped with partial or full-style compensators. Reverse Plug model fits Govt. length slides altered to accept tapered sleeve bushing. These are for standard recoil springs only, not Flat Wire Springs. 1911, Issue:11, Page:016 Big Book Catalog, Issue:69, Page:109 Sinclair, Issue:1A, Page:015

    HOT!
  • 1911 GUIDE RODS EGW More Detail

    1911 GUIDE RODS EGW

    Click here for price!$89.99 - $124.99Click here for price!$89.99 - $124.99

    Weight-Adding Tungsten Or Tough Stainless Steel 5" One Piece Guide Rod: Fits flush with the slide so you can turn the bushing to disassemble the gun. This guide rod also features a takedown hole. This tungsten guide rod should be checked by a gunsmith familiar with the 1911 design. It may require minor fitting to contact the frame evenly. Failure to do so may lead to premature wear and/or breakage which will not be covered under warranty. The head of the guide rod has smooth beveled edges to make for a seamless look.   1911, Issue:11, Page:015 Big Book Catalog, Issue:69, Page:109 Sinclair, Issue:1A, Page:015

    HOT!
  • SEMI-AUTO RECOIL MANAGEMENT SYSTEM SPRINCO USA More Detail

    SEMI-AUTO RECOIL MANAGEMENT SYSTEM SPRINCO USA

    Click here for price!$79.99 - $94.99Click here for price!$79.99 - $94.99

    Reduces Felt Recoil, Muzzle Climb & Frame Damage Drop-in sytem provides significant reduction in felt recoil and grip fatigue. Plus, it keeps the gun “flat” so your sights stay on target to help you shoot faster. Bright polished, stainless steel guide rod fitted with a chrome silicon, secondary spring that reduces slide-to-frame impact with no loss of reliable cycling. Softens the recoil impulse by gradually slowing the slide to prevent frame battering; helps extend your pistol’s service life. Models marked with a * include a new recoil spring, others use your factory or aftermarket spring. Drop-in installation requires no modifications to your pistol. Glock® Models fit gen 3 and earlier guns only. “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products. 1911, Issue:11, Page:016 Big Book Catalog, Issue:69, Page:109 Big Book Catalog, Issue:69, Page:213 Sinclair, Issue:1A, Page:015

    HOT!
  • 1911 GOVERNMENT RECOIL SPRINGS ISMI More Detail

    1911 GOVERNMENT RECOIL SPRINGS ISMI

    Click here for price!$7.99Click here for price!$7.99

    Designed For Maximum Consistency & ReliabilityCAD designed and built to aerospace specifications from chrome silicon or corrosion resistant stainless steel for maximum durability, consistency and reliable performance. Heat treated, shot peened and fully stress relieved to minimize spring set. 1911, Issue:11, Page:031 Big Book Catalog, Issue:69, Page:124 Sinclair, Issue:1A, Page:030

    HOT!
  • 1911 CHROME SILICON RECOIL SPRING WOLFF More Detail

    1911 CHROME SILICON RECOIL SPRING WOLFF

    Click here for price!$7.95 - $7.99Click here for price!$7.95 - $7.99

    Resists Taking A Set; Choice Of Three Weights To Match Your GunChrome silicon steel recoil spring resists taking a set even after thousands of compression cycles for improved performance and reliability. Available in three power ratings, so you can match spring weight to your specific gun and the type of load you shoot. Use Reduced Power 14 lb. spring for target loads with lighter than standard bullets or powder charges, Factory Standard 16 lb. spring for all-around reliability with the widest range of ammo, and Extra Power 18 lb. spring for smoother cycling and less slide battering with heavy loads. Each spring comes with an extra power firing pin spring to ensure positive ignition and an extra margin of safety in preventing accidental discharges. 1911, Issue:11, Page:032 Big Book Catalog, Issue:69, Page:126 Sinclair, Issue:1A, Page:031

    HOT!
  • AR-15 PISTOL BUFFER TUBE ASSEMBLY BROWNELLS More Detail

    AR-15 PISTOL BUFFER TUBE ASSEMBLY BROWNELLS

    Click here for price!$49.99Click here for price!$49.99

    AR-15 Pistol Buffer Tube Assembly ready for your next build. Assembly includes buffer tube, castle nut, endplate, spring & carbine buffer. Tube is extruded from 6061-T6 aluminum & has a matte black hardcoat anodized finish. Included buffer weighs 3.0oz.

    HOT!
  • 1911 TWO-PIECE GUIDE ROD ED BROWN More Detail

    1911 TWO-PIECE GUIDE ROD ED BROWN

    Click here for price!$29.99Click here for price!$29.99

    Prevents Recoil Spring Bind; Makes Takedown EasierFull-length, two piece design fully supports the recoil spring to help the pistol chamber, extract and cycle smoother. Helps prevent spring bind, makes slide takedown fast and simple. Long wearing, shock-resistant head and hardened stainless steel shaft stand up to both competition and duty use. 1911, Issue:11, Page:015 Big Book Catalog, Issue:69, Page:108 Sinclair, Issue:1A, Page:004 Sinclair, Issue:1A, Page:014

    HOT!
  • 1911 SHOK-BUFFS® WILSON COMBAT More Detail

    1911 SHOK-BUFFS® WILSON COMBAT

    Click here for price!$6.99Click here for price!$6.99

    Softens The Blow Of Recoil; Helps Prevent Frame DamagePrevents expensive frame damage when shooting high-pressure, major power factor loads. Replaceable, poly-fiber washer installs behind the recoil spring on any length guide rod. The shock absorbing action stops the slide from battering the frame. Injection molded for the optimum balance between shock absorption and longevity. Replace every 1,000 rounds. 1911, Issue:11, Page:016 Big Book Catalog, Issue:69, Page:110 Sinclair, Issue:1A, Page:016

    HOT!
  • AR-15/M16 PISTOL BUFFER TUBES MIDWEST INDUSTRIES, INC. More Detail

    AR-15/M16 PISTOL BUFFER TUBES MIDWEST INDUSTRIES, INC.

    Click here for price!$44.99 - $74.99Click here for price!$44.99 - $74.99

    Fits Flush With Rear Of Brace Constructed of 6061 aluminum, these tubes are designed to be used as a stand-alone buffer tube or with the Sig Sauer SB15 Pistol Brace. Tube is proper length to fit flush with the end of pistol brace. A machined shoulder on tube keeps the brace from shifting forward. Tube has Mil-Spec diameter behind the threads and will accept a variety of end plates. Kit includes tube, lock ring, end plate, buffer spring and buffer.

    HOT!
  • 1911 SHOK-BUFF RECOIL SYSTEM WILSON COMBAT More Detail

    1911 SHOK-BUFF RECOIL SYSTEM WILSON COMBAT

    Click here for price!$38.99Click here for price!$38.99

    Improves Accuracy, Functioning; Elimnates Frame Cracking From RecoilEasy-to-install kit instantly improves cycling, reliability and accuracy without modifying the frame or the slide. Exclusive, injection-molded, polyfiber buffers slip onto the guide rod be- tween the head and spring and keep the slide from hitting the frame. Prevents expensive frame damage and softens the felt recoil of high power competition loads. Full-length guide rod keeps the recoil spring straight for smoother functioning and longer spring life. Together they provide consistent barrel lockup and increased accuracy. 1911, Issue:11, Page:016 Big Book Catalog, Issue:69, Page:110 Sinclair, Issue:1A, Page:016

    HOT!
  • BERETTA 92/96 FULL SIZE GUIDE ROD WILSON COMBAT More Detail

    BERETTA 92/96 FULL SIZE GUIDE ROD WILSON COMBAT

    Click here for price!$21.99Click here for price!$21.99

    The Wilson Combat Beretta® 92/96 steel fluted guide rod is a practical and handsome addition to your full size Beretta® pistol. Drops in with no modifications to your handgun. Drop in recoil spring guide rod for full-size Beretta®handguns. Unique spiral flute design holds lubrication and traps grit ensuring smooth spring travel. Non-captured CNC machined from 4140 heat-treated steel with a corrosion resistant and attractive black Melonite finish. Fits all Beretta® full sized series 90 pistols. Will retrofit to 92A1/96A1. Will not fit Compact, Centurion, or Compact Type M pistols. Big Book Catalog, Issue:69, Page:213

    HOT!

Subscribe our newsletter

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Ex, velit!