• AR-15 AMBIDEXTROUS SAFETY SELECTOR BLUE BATTLE ARMS DEVELOPMENT INC. More Detail

    AR-15 AMBIDEXTROUS SAFETY SELECTOR BLUE BATTLE ARMS DEVELOPMENT INC.

    Click here for price!$57.00 - $79.00Click here for price!$57.00 - $79.00

    Oversized, Deeply Grooved Levers For Positive Operation With Either Hand Machined, heat-treated steel safety selector puts oversized levers on both sides of the receiver for easy ambidextrous operation. Large surface area lets you operate the safety while wearing gloves, and eliminates fumbling in the dark. Pads are deeply grooved for an ultra-secure grip under stress or when hand is wet. Can be customized by positioning the larger pad on either side of the receiver, or by applying high-visibility paint. Mounting hardware included. Individual Safety Selector Levers are available for customization. AR-15, Issue:11, Page:036 Big Book Catalog, Issue:69, Page:035 Sinclair, Issue:5B, Page:250

    HOT!
  • AR-15 AMBIDEXTROUS SAFETY DPMS More Detail

    AR-15 AMBIDEXTROUS SAFETY DPMS

    Click here for price!$29.99 - $33.99Click here for price!$29.99 - $33.99

    Easier Engagement For Left-Handed Shooters Puts the same, easy-to-operate safety lever on both sides of the receiver for fast, easy operation by left-handed shooters or when shooting with the weak hand. Swings through the same arc as the standard safety; will not interfere with grip position or thumb placement. LR-08B is a safety lever for semi-auto AR-15s. LR-08C is an ambi selector/safety lever for M16-type full-auto rifles only.   AR-15, Issue:11, Page:036 Big Book Catalog, Issue:69, Page:035

    HOT!
  • SAFETY SELECTOR KIT, AMBIDEXTROUS, BLACK SEEKINS PRECISION More Detail

    SAFETY SELECTOR KIT, AMBIDEXTROUS, BLACK SEEKINS PRECISION

    Click here for price!$34.19Click here for price!$34.19

    90 degree standard throw lever 60 degree short throw lever Available in black Drop in replacement for Mil-Spec selector switch Fully ambidextrous Not recommended to be used with the Hipertouch trigger

    HOT!
  • AR-15 TALON SAFETY SELECTOR AMBIDEXTROUS RADIAN WEAPONS More Detail

    AR-15 TALON SAFETY SELECTOR AMBIDEXTROUS RADIAN WEAPONS

    Click here for price!$56.99 - $66.99Click here for price!$56.99 - $66.99

    The Radian Weapons (formerly AXTS) Talon™ ambidextrous safety selector is a modular design that can be installed as a standard 90° or as a 45° short throw by simply rotating the shaft 180° inside the lower receiver. Selector levers install using a precision machined dovetail interface with spring-loaded retention stud to lock the lever in place – no screws to come loose or break. The Talon is compatible with most semi-automatic AR15 & AR10/SR25-pattern rifles. Patent pending. Designed & Manufactured in the USA 2-Lever Combo: Short + Long Levers Machined from Billet 7075-T6 Aluminum w Milspec Type 3 Hard Coat Anodized Finish or Cerakote Center Shaft Machined from Hardened Steel w/ Black Nitride Finish

    HOT!
  • AR-15 SAFETY SELECTOR CMMG More Detail

    AR-15 SAFETY SELECTOR CMMG

    Click here for price!$29.99Click here for price!$29.99

    Gives Safety Ambidextrous Function Safety selector drops in to standard AR-15 and DPMS-pattern .308 lower receivers to give ambidextrous function. Opposite-side lever secures with set screw ad can be easily installed or removed. Ridges give positive purchase for fast operation. AR-15, Issue:11, Page:036 Big Book Catalog, Issue:69, Page:035

    HOT!
  • AK-47/74 ENHANCED SAFETY KREBS CUSTOM, INC. More Detail

    AK-47/74 ENHANCED SAFETY KREBS CUSTOM, INC.

    Click here for price!$58.99Click here for price!$58.99

    FEATURES: Extended lower pad Bolt hold open notch Precision stamped from 1mm 1050 steel Heat treated to 50c One piece exterior construction Made in USA Matte black painted finish Fits standard AK-47 and AK-74 riflesBENEFITS: Extended safety allows for easier manipulation using the firing hand Bolt hold open notch allows for the AK bolt to be locked to the rear by holding the charging handle Heat treated one piece outer construction will hold up to repeated use Matte black painted finish matches traditional AK finishes Big Book Catalog, Issue:69, Page:155

    HOT!
  • AR-15 SHORT THROW SELECTOR NOVESKE RIFLEWORKS LLC More Detail

    AR-15 SHORT THROW SELECTOR NOVESKE RIFLEWORKS LLC

    Click here for price!$37.95 - $39.95Click here for price!$37.95 - $39.95

    60/ Selector With Magpul SSG Levers Noveske’s STS (Short Throw Selector) gives your AR’s selector a short 60° throw for fast, easy transition between the “Fire” and “Safe” positions. It uses Magpul’s popular SSG selector lever (included) for the FN SCAR for enhanced ergonomic feel, and is available in both standard right-hand and ambidextrous versions. For further versatility, the Noveske kit includes both long and short levers to help you get the best feel and function. The central shaft is machined from hardened stainless steel with a nitride coating for surface wear resistance. AR-15, Issue:11, Page:037 Big Book Catalog, Issue:69, Page:035

    HOT!
  • AR-15 AMBIDEXTROUS SAFETY SELECTOR SHORT THROW 45 BLACK BATTLE ARMS DEVELOPMENT INC. More Detail

    AR-15 AMBIDEXTROUS SAFETY SELECTOR SHORT THROW 45 BLACK BATTLE ARMS DEVELOPMENT INC.

    Click here for price!$79.95Click here for price!$79.95

    Short Throw Safety Selector shortens the throw distance to 45o instead of 90o.  This short throw distance allows for a rapid transition from “Safe” to “Fire”.  The Short Throw Safety Selector can only be used in 45o compatible lower receivers. Available with a Matte Black finish. AR-15, Issue:11, Page:036 Big Book Catalog, Issue:69, Page:035

    HOT!
  • AR-15 57/90 DEGREE AMBIDEXTROUS SELECTOR V SEVEN WEAPON SYSTEMS More Detail

    AR-15 57/90 DEGREE AMBIDEXTROUS SELECTOR V SEVEN WEAPON SYSTEMS

    Click here for price!$66.99Click here for price!$66.99

    Convertible Ambi Features Both 57° &  90° Lever Throw Options Allows Customer To Choose Between A Short Or Standard Throw Compatible With Both Ar-15 & Ar-10 Style Rifles (Semi-Auto) Corrosion Resistant Levers & Core Includes 4/40X1/4 Grade 5 Titanium Torx Socket Head Screws,  Mil-  Spec Safety Detent & Spring. (Black Ti Selector Ships W/ Black Steel Screws.) 100% Lifetime Warranty Made In The United States Of America Weighs Approx. 11.77 Grams  Core: Constructed From Grade 5 Heat Treated, Hardened Titanium Coated Black With Ion Bond Finish  Lever: Constructed From Titanium Raw Titanium Finish Levers Come Loosely Assembled. We Recommend Customer To Degrease Core And Screw Threads And Assemble With Blue Loctite Applied To Screw Threads.  Do Not Over Tighten The Selector Screws!! Screws Should Be Tightened To 20 Inch Pounds Maximum. ?Ambidextrous Version Is Not Compatible With Hyperfire Triggers Or Ruger Precision Bolt Action Rifles.

    HOT!
  • AR-15 LIGHTWEIGHT AMBIDEXTROUS SAFETY SELECTOR BATTLE ARMS DEVELOPMENT INC. More Detail

    AR-15 LIGHTWEIGHT AMBIDEXTROUS SAFETY SELECTOR BATTLE ARMS DEVELOPMENT INC.

    Click here for price!$59.95Click here for price!$59.95

    Same as their BAD-ASS Ambidextrous Safety Selectors but with a Lightweight Skeletonized Center/Core and Lightweight Billet 7075-T6 Aluminum Skeletonized Standard and Short Levers! Each Retail Package Comes With: (1) SAFETY CENTER (0°-90° SEMI AUTO) - Lightweight Skeletonized Steel Core (2) LEVERS - Lightweight 7075-T6 Aluminum (Standard and Short) - No other lever options (2) TORX SCREWS BLACK OXIDE (1) HARDENED STAINLESS STEEL SAFETY DETENT (by KNS Precision) (1) T10 TORX L-Key (1) SELECTOR DETENT SPRING PRECISION CNC MACHINED FROM BAR STOCK STEEL & BILLET ALUMINUM MADE IN U.S.A. WEIGHT = 0.42 oz

    HOT!
  • AR-15 AMBIDEXTROUS SAFETY KIT KNIGHTS ARMAMENT More Detail

    AR-15 AMBIDEXTROUS SAFETY KIT KNIGHTS ARMAMENT

    Click here for price!$62.94Click here for price!$62.94

    Choose The Right-Hand Lever Configuration That Suits Your Shooting Requirements Knight's semi-auto safety lever gives true ambidextrous selector operation to your AR. Comes with three different right-hand levers, so you can choose the exact size/position to suit your personal shooting preferences. Choose a full-size right-side lever that mirrors the left-side lever, a low-profile, semi-scalloped lever that is minimally obtrusive, or an indicator arrow that gives instant visual verification of the rifle's firing mode.  Easy to install, too: with the selector fully installed in the gun, you simply remove a recessed setscrew to swap the right-hand lever. All-steel construction to handle hard use, with smooth, positive operation.

    HOT!
  • BUEHLER-STYLE LOW SAFETY TIMNEY More Detail

    BUEHLER-STYLE LOW SAFETY TIMNEY

    Click here for price!$39.99 - $52.99Click here for price!$39.99 - $52.99

    Positive Stops At On & Off; Simple, Fast InstallationThe re-make of the famous Buehler Low Safety. Faster and much more convenient to operate than the factory safety plus, it will not interfere with even the lowest mounted scopes. Rotates through a 70 arc on the right side of the rifle with positive stops in both the "on" and "off" positions. Securely holds the bolt and the striker in the locked position. Precision CNC machined from high-quality steel, hardened at all wear points, polished and blued. No machining required for installation on M98. M93/96 may require grinding of cocking piece. Big Book Catalog, Issue:69, Page:160

    HOT!
  • AR-15 AMBIDEXTROUS SEMI-AUTO SAFETY TROY INDUSTRIES, INC. More Detail

    AR-15 AMBIDEXTROUS SEMI-AUTO SAFETY TROY INDUSTRIES, INC.

    Click here for price!$55.99Click here for price!$55.99

    Lets You Control Safety From Either Side Of Your AR All-steel selector lever installs like the original and adds a lever to the right side of the gun for left-handed shooters or right-handed shooters shooting from unorthodox positions. Right-side lever has a low profile to avoid interfering with the trigger finger of right-handed shooters and is retained with a detent - no screws or pins to work loose. Small and large lever can be reversed and used on either side. Made of tool steel to last a lifetime. AR-15, Issue:11, Page:037 Big Book Catalog, Issue:69, Page:035

    HOT!
  • AR-15 SAFETY SELECTOR DPMS More Detail

    AR-15 SAFETY SELECTOR DPMS

    Click here for price!$9.99Click here for price!$9.99

    FITS: AR-15 - Common Parts, .223 AR-15, Issue:06, Page:095 Big Book Catalog, Issue:68, Page:605

    HOT!
  • AR-15 AMBIDEXTROUS SAFETY SELECTOR FULL AUTO BLACK BATTLE ARMS DEVELOPMENT INC. More Detail

    AR-15 AMBIDEXTROUS SAFETY SELECTOR FULL AUTO BLACK BATTLE ARMS DEVELOPMENT INC.

    Click here for price!$99.00Click here for price!$99.00

    Machined, heat-treated steel safety selector puts oversized levers on both sides of the receiver for easy ambidextrous operation. Large surface area lets you operate the safety while wearing gloves, and eliminates fumbling in the dark. Pads are deeply grooved for an ultra-secure grip under stress or when hand is wet. Can be customized by positioning the larger pad on either side of the receiver, or by applying high-visibility paint. Mounting hardware included. AR-15, Issue:11, Page:036 Big Book Catalog, Issue:69, Page:035

    HOT!
  • TWO POSITION SAFETY KIT WISNER More Detail

    TWO POSITION SAFETY KIT WISNER

    Click here for price!$32.99Click here for price!$32.99

    Converts Military Safety To Convenient Side Swing PositionModernizes the original military shroud and vertical safety to an easier-to-operate, two-position, side swing. Complete, ready-to-install kit provides increased clearance for lower mounting of scopes. Vertical grooving on thumb lever gives a positive, no-slip grip. Fully hardened and heat treated to resist wear. Requires machining of your shroud. Big Book Catalog, Issue:69, Page:160

    HOT!
  • MARK II SAFETY DAYTON TRAISTER More Detail

    MARK II SAFETY DAYTON TRAISTER

    Click here for price!$22.99Click here for price!$22.99

    Clears Lowest Scope MountingGraceful design sets low, allowing lowest possible scope mounting. One-piece construction, beautiful, non- glare, blued finish. Right-hand operation only. Easily installed, requiring slotting of bolt sleeve. Big Book Catalog, Issue:69, Page:159

    HOT!
  • AR-15 ADJUSTABLE/REVERSIBLE/AMBIDEXTROUS SAFETY SELECTOR J P ENTERPRISES More Detail

    AR-15 ADJUSTABLE/REVERSIBLE/AMBIDEXTROUS SAFETY SELECTOR J P ENTERPRISES

    Click here for price!$66.99Click here for price!$66.99

    Eliminates "Fitting" The Safety; Works With Factory & Aftermarket Triggers Easy-to-install, reversible safety selector ensures ultra-reliable engagement and eliminates the time-consuming job of “fitting the safety” to a factory or aftermarket trigger—the perfect upgrade to accompany a J.P. Enterprises Adjustable Trigger. Eliminates the risk of damaging the trigger during fitting and shortens installation time by as much as one-third. An adjustment screw on the selector drum lets you quickly and easily set the correct trigger/safety relationship to completely block trigger movement when the selector is set to “safe.” A second screw inside the drum ensures the adjustment screw stays locked in place. Deeply grooved control pad gives positive thumb engagement even when wearing gloves, and can be installed in the standard position on the left-side of the receiver or on the right side for fast, natural operation by left-handed shooters. Includes a low-profile ambidextrous lever for the other side that adds minimal bulk while giving you the flexibility to operate the safety with the off hand in an emergency or if the strong hand is injured. Or add the JPFC-SL1 Ambidextrous Selector Lever to give your rifle a full-size safety lever on both sides of the receiver for fully ambidextrous operation. Ideal for tactical and competition shooters who may need to operate the selector with the weak hand to accommodate an unconventional shooting position. AR-15, Issue:11, Page:036 Big Book Catalog, Issue:69, Page:035

    HOT!
  • AR6721 FIRE CONTROL SELECTOR, SEMI COLT More Detail

    AR6721 FIRE CONTROL SELECTOR, SEMI COLT

    Click here for price!$18.99Click here for price!$18.99

    FITS: AR-15 - Common Parts AR-15, Issue:06, Page:092 Big Book Catalog, Issue:68, Page:601

    HOT!
  • REMINGTON 700 THREE-POSITION SAFETY SHROUD GENTRY CUSTOM LLC More Detail

    REMINGTON 700 THREE-POSITION SAFETY SHROUD GENTRY CUSTOM LLC

    Click here for price!$154.99Click here for price!$154.99

    Side Swing-Style To Upgrade Factory Guns Or Build Custom Rifles All-machined steel shroud and lever upgrades the Remington 700 action to a three-position safety. Lets you use match grade triggers that lack a safety. Provides bolt locked, bolt open and fire positions with positive detents. No tools needed to field strip for cleaning, service. Available polished blued. Requires gunsmith installation. Big Book Catalog, Issue:69, Page:158

    HOT!
  • AR-15 SAFETY SELECTOR LEVERS BLACK BATTLE ARMS DEVELOPMENT INC. More Detail

    AR-15 SAFETY SELECTOR LEVERS BLACK BATTLE ARMS DEVELOPMENT INC.

    Click here for price!$17.05 - $22.75Click here for price!$17.05 - $22.75

    Oversized, Deeply Grooved Levers For Positive Operation With Either Hand Replacement levers are deeply grooved for sure-grip and available in various lengths, widths, and styles to facilitate easy safety operation in any condition.                 The Battle Arms Development BAD-CASS Scallop Lever has been designed to offer the best of all worlds. The Scallop has been shortened and scalloped to limit interference with the trigger finger.                 The Battle Arms Development BAD-CASS Short Crank Lever is designed to remain out of the way of your trigger finger while providing adequate leverage. AR-15, Issue:11, Page:036 Big Book Catalog, Issue:69, Page:035

    HOT!
  • AR-15 STAR SAFETY SELECTOR ROCK RIVER ARMS More Detail

    AR-15 STAR SAFETY SELECTOR ROCK RIVER ARMS

    Click here for price!$9.99Click here for price!$9.99

    Round Profile Rolls Under Your ThumbRound thumb pad gives fast, positive operation; especially important when wearing gloves. Rolls easily under your thumb for faster application or release. AR-15, Issue:11, Page:036 Big Book Catalog, Issue:69, Page:035

    HOT!
  • M&P 15-22 AMBIDEXTROUS SAFETY SELECTOR BLACK BATTLE ARMS DEVELOPMENT INC. More Detail

    M&P 15-22 AMBIDEXTROUS SAFETY SELECTOR BLACK BATTLE ARMS DEVELOPMENT INC.

    Click here for price!$51.30Click here for price!$51.30

    Ambidextrous Safety Selector (BAD-ASS-MP15-22) for the Smith & Wesson M&P15-22 rifle only. The Levers are detachable and interchangeable on both sides for maximum flexibility and user preference. The BAD-ASS is a must have for the "South Paw" and Ambidextrous Shooters! AR-15, Issue:11, Page:036 Big Book Catalog, Issue:69, Page:035

    HOT!
  • TAVOR LUMA SAFETY MANTICORE ARMS, INC More Detail

    TAVOR LUMA SAFETY MANTICORE ARMS, INC

    Click here for price!$34.99Click here for price!$34.99

    The Tavor LUMA (Lever, Upgraded Metal Ambidextrous) is a drop-in replacement for your factory safety.  The LUMA will work on both the right and left side of the gun.  Made of 6061 aluminum and finished in black anodizing.  The LUMA comes in a medium profile, mimicking the size of the IWI safety, and a slim, providing a much smaller profile. Big Book Catalog, Issue:69, Page:160

    HOT!

Subscribe our newsletter

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Ex, velit!