• AR-15/M16 GEN3-M FOLDING STOCK ADAPTER LAW TACTICAL LLC More Detail

    AR-15/M16 GEN3-M FOLDING STOCK ADAPTER LAW TACTICAL LLC

    Click here for price!$269.99 - $279.99Click here for price!$269.99 - $279.99

    Put A Folding Stock On Any AR-Pattern Rifle! Law Tactical's steel adapter enables installation of a folding stock on any AR-15 to create a smaller-profile rifle for easy deployment from a vehicle or transport in non-permissive environments. Works with standard gas impingement OR gas piston system. Accepts A2, mil-spec M4-style, and commercial carbine receiver extension tube and almost any stock that fits them. Compatible with all standard bolt carrier groups, including full-auto and .308 size. Single-button operation for quick folding and unfolding and steel locking latch keeps stock securely in place when extended. Gen3-M has a lowered hinge to avoid interference when charging the weapon, and a setscrew keeps the adapter securely affixed to the receiver. Hinge tension is adjustable so you can choose how stiff the folding mechanism is. Includes special bolt carrier extension (no tools to install/remove). Current version utilizes standard buffer retaining pin and spring. Stock adapter features DLC coating. View additional product information Will only work with compatible centerfire and mil-spec carriers. Does Not work with any AR 9mm BCG. AR-15, Issue:11, Page:048 Big Book Catalog, Issue:69, Page:047

    HOT!
  • AR-15 CTR/MOE CHEEK RISER MAGPUL More Detail

    AR-15 CTR/MOE CHEEK RISER MAGPUL

    Click here for price!$18.95Click here for price!$18.95

    Raises The Cheekweld For More Comfortable Shooting; Snap-On FitMolded polymer cheek riser snaps onto Magpul CTR and MOE buttstocks to provide added support and ensure correct eye alignment with open sights or optics for fast target acquisition. Creates a stable platform for accurate, long-range shooting. Three models let you to raise the cheekweld by ¼", ½", or ¾" for a personalized fit. No stock modification required. Designed for non-AR installations of CTR/MOE stocks; if installed on AR-15, stock must be left fully extended to allow operation of charging handle. AR-15, Issue:11, Page:045 Big Book Catalog, Issue:69, Page:043 Big Book Catalog, Issue:69, Page:046

    HOT!
  • RIFLE STICK-ON SCOPE EZE THE ORIGINAL D&E CHEEKEEZE More Detail

    RIFLE STICK-ON SCOPE EZE THE ORIGINAL D&E CHEEKEEZE

    Click here for price!$29.99 - $49.99Click here for price!$29.99 - $49.99

    Instantly Adds Comb Height For Heavy Recoiling Rifles, Slug Guns Recoil-absorbing, rubber pad raises the line of sight. Cushions the cheek from recoil for faster, more comfortable shooting. Works for both scope-mounted and open-sight-equipped rifles and shotguns. Made from extra-dense, polymer-foam rubber. Stick-On - Peel-off adhesive backing won’t shoot loose or shift position. Caution: Installation considered permanent. Adhesive may damage some stock finishes. Big Book Catalog, Issue:69, Page:370

    HOT!
  • RIFLE CHEEK-EEZ KICK-EEZ More Detail

    RIFLE CHEEK-EEZ KICK-EEZ

    Click here for price!$15.77 - $22.10Click here for price!$15.77 - $22.10

    Softens Felt Recoil Prevents Cheek BruisingPeel and stick to any cheekpiece and put an end to feeling beat up and sore the day after shooting. Genuine, Sorbothane®, recoil absorbing rubber is pre-cut with an adhesive back to fit quickly on hard-kicking shotguns or rifles. Three thicknesses allow fast comb height adjustments. Big Book Catalog, Issue:69, Page:370

    HOT!
  • LSS CHASSIS FOLDING ADAPTER MODULAR DRIVEN TECHNOLOGIES More Detail

    LSS CHASSIS FOLDING ADAPTER MODULAR DRIVEN TECHNOLOGIES

    Click here for price!$129.99Click here for price!$129.99

    The MDT Folding Stock adapter is designed to add a folding mechanism to the LSS Chassis system using AR-15 butt-stocks. There are 2 versions: One for Fixed Rifle Stocks and one for Collapsible Stocks. The folding stock adapter gives folding mechanism using ar-15 fixed rifle stocks on the MDT LSS Chassis system. Not usable on AR-15s. Big Book Catalog, Issue:69, Page:156

    HOT!
  • RIFLE STOCK PACKS TACTICAL OPERATIONS More Detail

    RIFLE STOCK PACKS TACTICAL OPERATIONS

    Click here for price!$39.99Click here for price!$39.99

    Increases Shooting Comfort & Provides Storage For Ammo & Other GearMade for the rifle shooter who requires a lot from a cheek pad, the Tac Ops pad offers a soft, synthetic suede cheek rest for increased shooting comfort with minimal increase in comb height. Stitched and reinforced nylon body has a zippered pocket for carrying little necessities like a windage and elevation card, cleaning gear, or small shooting accessories. Heavy, reinforced elastic cartridge carrier outside the pocket securely holds up to 8 rounds at your fingertips, ready to load. Three hook-and-loop cinch straps provide fast, secure installation, adjustment, and removal. Rear strap includes a hook-and-loop lined drag handle. Big Book Catalog, Issue:69, Page:370

    HOT!
  • RIFLE STRAP-ON CHEEK PIECE SMITH ENTERPRISE More Detail

    RIFLE STRAP-ON CHEEK PIECE SMITH ENTERPRISE

    Click here for price!$59.99Click here for price!$59.99

    Provides Positive Cheek-To-Stock Contact For Improved Shooting Form & ComfortComfortable, strap-on cheek pad helps you gain a positive and consistent cheekweld on buttstocks without an integral cheekrest or raised comb. Felt-like, waterproof inner pad with overlaid PVC shell cushions recoil and minimizes perceived vibration, so your face takes less of a beating when firing large caliber rifles or full automatic weapons. Outer covering of heavyweight, 1000 Denier ballistic cloth resists abrasion and perspiration. Three, extra-thick, hook-and-loop straps with loops allow you to cinch it down tight on the stock for absolutely no movement under recoil. Installs and removes in just seconds. Designed originally for the M14/M1A, but fits equally well on sporting rifles and shotguns. Available in black or tan. AR-15, Issue:10, Page:043 Big Book Catalog, Issue:69, Page:370

    HOT!
  • LSS CHASSIS FIXED STOCK ADAPTER MODULAR DRIVEN TECHNOLOGIES More Detail

    LSS CHASSIS FIXED STOCK ADAPTER MODULAR DRIVEN TECHNOLOGIES

    Click here for price!$49.00Click here for price!$49.00

    This is a new, shorter version of the Fixed Stock Adapter to reduce the LOP when using fixed stocks on our LSS chassis system.   Version 2 of the Fixed Stock Adapter.  Total Length: 22mm - 7/8"   Fixed Stock Adapter for the MDT LSS chassis allows for a fixed rifle stock to be used. Big Book Catalog, Issue:69, Page:156

    HOT!
  • RIFLE CHEEKEEZE THE ORIGINAL D&E CHEEKEEZE More Detail

    RIFLE CHEEKEEZE THE ORIGINAL D&E CHEEKEEZE

    Click here for price!$9.99 - $15.99Click here for price!$9.99 - $15.99

    Stick-On Pad Cushions Your Cheek From Recoil PainPuts an easy-to-install cushion between your tender cheek and any rifle or shotgun stock. Space age, peel-and-stick polymer foam actually absorbs the force of recoil to help alleviate the pain caused by a hard-kicking rifle or shotgun. A great way to make small adjustments to comb height. Big Book Catalog, Issue:69, Page:370

    HOT!
  • SCAR BUTTSTOCK ADAPTERS VLTOR WEAPON SYSTEMS More Detail

    SCAR BUTTSTOCK ADAPTERS VLTOR WEAPON SYSTEMS

    Click here for price!$161.45Click here for price!$161.45

    The VLTOR SCAR Receiver Extension/ Stock Adapter provides a rock solid solution to installing a standard, Mil-Spec M4/AR-15 collapsible stock onto the SCAR. This lightweight attachment is made in a variation for either the Semi-Auto version or Select Fire. Does not allow for stock to be folded.

    HOT!
  • AR-15 A2 BUTTSTOCK WEIGHT BROWNELLS More Detail

    AR-15 A2 BUTTSTOCK WEIGHT BROWNELLS

    Click here for price!$27.99Click here for price!$27.99

    Balances The Rifle For Consistent AccuracyPre-formed lead ingot increases the rear weight; balances out muzzle-heavy, match AR-15's for consistent, shot-to-shot accuracy. Denser than loose, lead shot; conveniently drops into the A-2 buttstock and is retained by the trap door. Can be cut, drilled or trimmed to achieve required balance. AR-15, Issue:11, Page:048 Big Book Catalog, Issue:69, Page:047

    HOT!
  • AK-47 COLLAPSIBLE STOCK ADAPTER VLTOR WEAPON SYSTEMS More Detail

    AK-47 COLLAPSIBLE STOCK ADAPTER VLTOR WEAPON SYSTEMS

    Click here for price!$89.99Click here for price!$89.99

    Gives Your AK The Adjustability & Convenience Of An M4 StockAluminum receiver extension replaces the standard, fixed buttstock on your AK-47 to let you install an M4 collapsible stock on your rifle. Provides five locking positions; corresponding white index numbers are visible through the release pin access hole found on many buttstocks. Near-receiver sockets on each side of the extension accept quick-detach, push-button swivels for single-point sling attachment. An internal storage compartment is accessible by removing screw-on cap from the rear of the extension. Includes mounting hardware. Big Book Catalog, Issue:69, Page:190

    HOT!
  • AK-47/74 REAR TRUNNION DDI LLC More Detail

    AK-47/74 REAR TRUNNION DDI LLC

    Click here for price!$59.95Click here for price!$59.95

    DDI's US manufactured AK-74 style rear trunnion. This is used on all DDI stamped fixed-stock rifles ( stamped 47 and 74 variants). Can be used with most AK-74 parts kits.

    HOT!
  • AK-47 M4 STOCK ADAPTER RIFLE DYNAMICS More Detail

    AK-47 M4 STOCK ADAPTER RIFLE DYNAMICS

    Click here for price!$65.00Click here for price!$65.00

    Jim Fuller and Rifle Dynamics have wanted to bring this stock adapter to market for a long time. Earl Pittman of IWC got involved and helped refine Fuller’s design to bring this project home. The Rifle Dynamics adapter offers the somewhat unique feature of allowing the use of an AR-15 end plate and different sling set-ups. This feature allows many different sling-mounting options for the individual users. Any sling adapter that fits on the AR buffer tube should work like the MagPul ASAP. This adapter is easy to install without modification to the AK with no need to cut off the stock tang, as it fits inside the adapter and tube.

    HOT!
  • RIFLE AK TO AR BUFFER TUBE ADAPTER STRIKE INDUSTRIES More Detail

    RIFLE AK TO AR BUFFER TUBE ADAPTER STRIKE INDUSTRIES

    Click here for price!$29.95Click here for price!$29.95

    Strike Industries stock adapter allows for the replacement of any standard fixed AK stock to be converted to accept an AR buffer tube assembly. This adapter is easy to install without any modifications to your AK.  With no need to permanently alter the stock tang as it fits inside the adapter and tube. This product will take your AK into the twenty first century with the looks and the adjust-ability of a M4. Strike Industries also incorporated QD (quick disconnects) on both sides of the AK stock adapter.

    HOT!
  • RIFLE STAP-ON SCOPE EZE THE ORIGINAL D&E CHEEKEEZE More Detail

    RIFLE STAP-ON SCOPE EZE THE ORIGINAL D&E CHEEKEEZE

    Click here for price!$29.99 - $49.99Click here for price!$29.99 - $49.99

    Recoil-absorbing, rubber pad raises the line of sight. Cushions the cheek from recoil for faster, more comfortable shooting. Works for both scope-mounted and open-sight-equipped rifles and shotguns. Made from extra-dense, polymer-foam rubber. Strap-On - Removable/replaceable; velcro and elastic straps attach pad to stock. Big Book Catalog, Issue:69, Page:370

    HOT!
  • AR-15 6-POSITION STOCK CHEEK REST COMMAND ARMS ACC More Detail

    AR-15 6-POSITION STOCK CHEEK REST COMMAND ARMS ACC

    Click here for price!$15.99Click here for price!$15.99

    Two Different Heights Help Align Eye With Iron Sights & Optics Cheek pieces snap onto most standard M4-style collapsible stocks and provide comfortable and stable support, proper eye alignment and consistent precision when using optics or iron sights. Quick, easy installation and removal require no gunsmithing or tools. Each unit anchors into the stock's horizontal ribs and can be positioned along the length of the stock for optimal eye relief. Made of rugged, fiberglass, reinforced polymer to withstand harsh tactical conditions.

    HOT!
  • AK-47 CHEEK REST SAMSON MANUFACTURING CORP More Detail

    AK-47 CHEEK REST SAMSON MANUFACTURING CORP

    Click here for price!$71.25Click here for price!$71.25

    All metal construction Hard coat anodized finish Easy to install Clamps to side rail 4 attaching Allen head screws Fully adjustable for height and distance Attaches either left or right side of stock Fits forward folding stocks Stock can be foldedThe problem with most folding stocks is there is no comb to rest your face against for stability and proper shooting grip. The Samson AK47 Cheek Rest has an answer for proper long gun face weld and better accuracy without giving up the convenience and compactness of the forward folding AK-47 stock that we love so well. The Samson cheek rest is made of metal with a hard coat anodized finish to resist corrosion. It is easy to install by simply clamping it to the side rail of your folding stock. Four attaching Allen head screws secure the rest in the position you desire, with adjustments for height and distance being entirely up to you. It mounts on either the left or right side of forward folding stocks. Don’t give up your folding stock in order to gain better accuracy with a more secure shooting grip, just install the Samson AK47 Cheek Rest and see what a difference it makes.

    HOT!
  • 17VS BULLSEYE STOCK INLAY STUD WHITE PLASTIC MARLIN More Detail

    17VS BULLSEYE STOCK INLAY STUD WHITE PLASTIC MARLIN

    Click here for price!$3.99Click here for price!$3.99

    FITS: 17VS, .17 Mag; 1894 - Common Parts; 1895 - Common Parts; 39A, .22 LR; 60SS, .22 LR; 336C, .35 Rem, .30-30; 336CB, .38-55; 336SS, .30-30; 444, .444; 882, .22 Mag; 882L, .22 Mag; 883, .22 Mag; 883SS, .22 Mag; MR-7 Big Book Catalog, Issue:68, Page:621 Big Book Catalog, Issue:68, Page:622 Big Book Catalog, Issue:68, Page:623 Big Book Catalog, Issue:68, Page:626 Big Book Catalog, Issue:68, Page:627 Big Book Catalog, Issue:68, Page:628 Big Book Catalog, Issue:68, Page:629 Big Book Catalog, Issue:68, Page:630 Big Book Catalog, Issue:68, Page:631

    HOT!
  • AI CHASSIS CHEEKPIECE THUMB SCREW ACCURACY INTERNATIONAL More Detail

    AI CHASSIS CHEEKPIECE THUMB SCREW ACCURACY INTERNATIONAL

    Click here for price!$19.99Click here for price!$19.99

    Factory replacement thumbscrews for the Accuracy International Chassis System. Features the Accuracy International logo on the face of the screw. Sold as a single thumbscrew.

    HOT!
  • M1A FRONT FERRULE UNFINISHED STEEL SPRINGFIELD ARMORY More Detail

    M1A FRONT FERRULE UNFINISHED STEEL SPRINGFIELD ARMORY

    Click here for price!$7.50Click here for price!$7.50

    FITS: M1A, .308 Big Book Catalog, Issue:68, Page:692

    HOT!
  • AK-47/74 6 POSITION ALUMINUM BUTTSTOCK TUBE COMMAND ARMS ACC More Detail

    AK-47/74 6 POSITION ALUMINUM BUTTSTOCK TUBE COMMAND ARMS ACC

    Click here for price!$89.99Click here for price!$89.99

    Six position stock adapters allow for the use of M4 carbine style stocks on AK-47/74 rifles. Adapters available in aluminum, with designs for milled, stamped or under folding receivers. Stock angle is higher and flatter for a higher cheek weld. Increases length of pull beyond standard AK stocks.

    HOT!
  • AR-15 STANDARD M4 STOCK SADDLE COMMAND ARMS ACC More Detail

    AR-15 STANDARD M4 STOCK SADDLE COMMAND ARMS ACC

    Click here for price!$16.99Click here for price!$16.99

    Lightweight Cheek Support Plus Convenient Battery StorageProvides added cheek support for increased comfort and shooting accuracy to AR-type rifles equipped with M4-style collapsible stocks. Plus, gives an advanced tactical appearance similar to the SOPMOD stock. Made from a very lightweight, fiberglass reinforced plastic thats as strong as it is functional. Waterproof, sealed compartments on each side will hold four AA or six CR123 cell batteries. No gunsmithing required for installation; saddle locks onto stock with accessory sling loop hardware thats provided. Rubberized model includes all the features of the standard model and adds a rubberized, no-slip coating that gives an exceptionally solid cheekweld for even greater shooter comfort and control. AR-15, Issue:11, Page:048 Big Book Catalog, Issue:69, Page:048

    HOT!
  • AK-47 1/2 More Detail

    AK-47 1/2" CHEEK RISER MAGPUL

    Click here for price!$9.45Click here for price!$9.45

    Tool-less clip-on cheek risers for the MOE AK and Zhukov-S Stocks. Gives the user the option to raise the cheek weld .50 inches in height. Will not interfere with storage access on MOE Stock or the folding mechanism on the Zhukov-S Stock. Big Book Catalog, Issue:68, Page:199

    HOT!

Subscribe our newsletter

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Ex, velit!