• PICATINNY RVG RAILED VERTICAL GRIP MAGPUL More Detail

    PICATINNY RVG RAILED VERTICAL GRIP MAGPUL

    Click here for price!$23.70Click here for price!$23.70

    Lightweight vertical grips position your support hand close to the barrel to help you maintain maximum weapon control at all times. Ergonomically shaped design is optimized for use with the “thumb break” method of grasping the weapon, yet works just as well with a traditional vertical grip stance. Aggressive horizontal serrations on the front and back, plus crackle texturing on the sides ensure a secure grasp in all weather conditions. RVG™ (Rail Vertical Grip) combines the MVG’s ergonomic features with a conventional Picatinny attachment system for use on standard railed handguards. Includes an adapter that enables installation on many non-railed forends, too. AR-15, Issue:11, Page:058 Big Book Catalog, Issue:69, Page:058

    HOT!
  • M-LOK VERTICAL GRIP MAGPUL More Detail

    M-LOK VERTICAL GRIP MAGPUL

    Click here for price!$21.80Click here for price!$21.80

    The M-LOK MVG is a light weight vertical foregrip that attaches directly to M-LOK compatible hand guards and forends. The M-LOK MVG is made from the same high quality polymer as other Magpul products, and uses the new Magpul TSP texture for positive control in all environments. With rounded contours and a shorter length, the M-LOK MVG has been optimized for use with the “thumb break method” of shooting and can also be used as a traditional vertical foregrip. AR-15, Issue:11, Page:058 Big Book Catalog, Issue:69, Page:058

    HOT!
  • PICATINNY MODULAR COMBAT GRIP TROY INDUSTRIES, INC. More Detail

    PICATINNY MODULAR COMBAT GRIP TROY INDUSTRIES, INC.

    Click here for price!$64.99 - $69.99Click here for price!$64.99 - $69.99

    Easily Converts From Full-Length To Stubby ConfigurationDeeply knurled vertical forend grip provides a comfortable, secure grasp for outstanding recoil control and ultra-fast pointability. Modular design lets you choose a secure, full-palm configuration, or by unscrewing and removing the center section, a low-profile “stubby” grip. Full-length, spring-loaded locking bar, plus front and rear rail lugs ensure a rock-solid installation on any Picatinny rail. Flush-fit crossbolt to minimize risk of snagging on other gear. Rugged, all-aluminum construction with waterproof O-ring seals to keep contents of the roomy internal storage compartment dry. AR-15, Issue:11, Page:058 Big Book Catalog, Issue:69, Page:057

    HOT!
  • KEYMOD BCMGUNFIGHTER SHORT VERTICAL GRIP BRAVO COMPANY More Detail

    KEYMOD BCMGUNFIGHTER SHORT VERTICAL GRIP BRAVO COMPANY

    Click here for price!$39.99Click here for price!$39.99

    Quick detachable, Patent Pending, Tool-less, Direct Mount Keymod interface. Low-profile length for increased mobility and decreased “snag” factor. The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle. Can be mounted in reverse angle to increase control when grabbing handguard and grip. Flat sides give better yaw control during firing and non-firing manipulations. Aggressive texture. Storage inside the grip. Requires three Keymod attachment hole mounting points. Spring-loaded clamps make installation and removal easier. AR-15, Issue:11, Page:057 Big Book Catalog, Issue:69, Page:057

    HOT!
  • KEYMOD BCMGUNFIGHTER MOD 3 VERTICAL GRIP BRAVO COMPANY More Detail

    KEYMOD BCMGUNFIGHTER MOD 3 VERTICAL GRIP BRAVO COMPANY

    Click here for price!$18.99Click here for price!$18.99

    Low-profile length for increased mobility and decreased “snag” factor. The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle. Can be mounted in reverse angle to increase control when grabbing handguard and grip. Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations. Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces. AR-15, Issue:11, Page:057 Big Book Catalog, Issue:69, Page:057

    HOT!
  • MOE MVG VERTICAL GRIP MAGPUL More Detail

    MOE MVG VERTICAL GRIP MAGPUL

    Click here for price!$18.95Click here for price!$18.95

    For Positive, Comfortable Weapon Control At All Times Lightweight vertical grips position your support hand close to the barrel to help you maintain maximum weapon control at all times. Ergonomically shaped design is optimized for use with the “thumb break” method of grasping the weapon, yet works just as well with a traditional vertical grip stance. Aggressive horizontal serrations on the front and back, plus crackle texturing on the sides ensure a secure grasp in all weather conditions. MVG™ (MOE® Vertical Grip) is designed to clamp easily to Magpul MOE handguards and the handguard of the Bushmaster ACR™ (Adaptive Combat Rifle) without the need for an accessory rail. AR-15, Issue:11, Page:058 Big Book Catalog, Issue:69, Page:058

    HOT!
  • PICATINNY STUBBY GRIP TANGODOWN More Detail

    PICATINNY STUBBY GRIP TANGODOWN

    Click here for price!$61.20Click here for price!$61.20

    Improves Weapon Control, Adds Minimal Bulk Low-profile vertical forend grip gives you better control of your M4 carbine, breaching shotgun, or other CQB weapon without adding weight or excess bulk. Compact design won’t interfere with most vehicle gun racks, so weapon accessibility from a vehicle is not impaired. Rounded, ribbed surface helps prevent hand fatigue and cramping during long periods in the ready position. Quick-release, dual locking bars provide a rock-solid mounting interface to MIL-STD 1913 accessory rails. Waterproof storage compartment with O-ring seal on cap holds spare batteries or small parts. AR-15, Issue:11, Page:058 Big Book Catalog, Issue:69, Page:058

    HOT!
  • PICATINNY STANDARD VERTICAL GRIP TANGODOWN More Detail

    PICATINNY STANDARD VERTICAL GRIP TANGODOWN

    Click here for price!$67.25Click here for price!$67.25

    Tough, Combat-Tested Grips With Built-In Utility Features Quick-release, dual locking bars provide a rock-solid mounting interface to Mil-Std 1913 rails. Large diameter, ribbed grip helps prevent hand fatigue and cramping during long periods in the ready position. Oversized storage compartment is large enough for spare batteries or parts, including a complete M4/M16 bolt assembly. O-ring on cap forms a waterproof seal down to 66 ft. deep. Remove side filler panel to mount a light/laser remote pressure switch in the integral switch pocket. AR-15, Issue:11, Page:058 Big Book Catalog, Issue:69, Page:058

    HOT!
  • PICATINNY BCMGUNFIGHTER SHORT VERTICAL GRIP BRAVO COMPANY More Detail

    PICATINNY BCMGUNFIGHTER SHORT VERTICAL GRIP BRAVO COMPANY

    Click here for price!$35.99Click here for price!$35.99

    Short Vertical Grip Enhances Control, But Won't Snag Polymer vertical grip attaches to Picatinny rail to help improve weapon handling and control. Cross-bolt design allows installation with field expedient tools, like coin or cartridge rim, and mounting clamps are reversible. Short grip won't snap on slings and gear, and forward angle gives more natural wrist position. Texture and ridges give superior grip, and storage compartment holds spare batteries or other accessories. Available in black or Flat Dark Earth. AR-15, Issue:11, Page:057 Big Book Catalog, Issue:69, Page:057

    HOT!
  • SHIFT  VERTICAL GRIPS FORTIS MANUFACTURING More Detail

    SHIFT VERTICAL GRIPS FORTIS MANUFACTURING

    Click here for price!$75.95Click here for price!$75.95

    The new Shift™ fore-end vertical grip integrates form with functionality.  The hybrid design allows the operator to use as a full-on vertical grip or as a comfortable hand stop when going with the thumb over method.  The grip allows the operator to manipulate the weapon with confidence and the organic design enables the operator to handle the weapon in ways that's not quite as fluid with other vertical grip designs. Look for the Fortis distinctive grip design and you'll see the difference. Keep your speed and accuracy up.  Put more down range and on target. Fortis and the distinctive hand grip design are trademarks of Fortis Manufacturing, Inc. Features: One Piece Billet Design Aircraft Grade 6061-T6 Aluminum Military Specification Type III Hard Coat Anodized Light weight 3.8 oz Made in the USA

    HOT!
  • AR-15/M16 FOLDING VERTICAL FOREND GRIP ADVANCED TECHNOLOGY More Detail

    AR-15/M16 FOLDING VERTICAL FOREND GRIP ADVANCED TECHNOLOGY

    Click here for price!$24.99Click here for price!$24.99

    Helps You Get On Target Fast & Improves Recoil Control; Folds Away For StorageFold-away vertical grip clamps to any forend with a bottom accessory rail and provides a comfortable platform for the support hand to improve control. Makes weapon easier to point to help you get on target—or change targets—fast. Pronounced finger grooves, textured surface, and a hand-filling shape help you maintain steady downward force to counteract muzzle rise during rapid fire. Hit the pushbutton on the left side of the grip to change between five locking positions: vertical, 45° forward/rearward, or folded forward/backward parallel with the handguard for storage or carry. Constructed of lightweight, yet robust, fiberglass-reinforced molded nylon to stand up to hard use; slides over Picatinny forend rail and locks in place with a steel crossbolt for solid, wobble-free installation. AR-15, Issue:11, Page:058 Big Book Catalog, Issue:69, Page:057

    HOT!
  • PICATINNY BCMGUNFIGHTER MOD 3 VERTICAL GRIP BRAVO COMPANY More Detail

    PICATINNY BCMGUNFIGHTER MOD 3 VERTICAL GRIP BRAVO COMPANY

    Click here for price!$19.99Click here for price!$19.99

    Low-profile length for increased mobility and decreased “snag” factor. The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle. Can be mounted in reverse angle to increase control when grabbing handguard and grip. Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations. Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces. AR-15, Issue:11, Page:057 Big Book Catalog, Issue:69, Page:057

    HOT!
  • PICATINNY VERTICAL FOREGRIP DANIEL DEFENSE More Detail

    PICATINNY VERTICAL FOREGRIP DANIEL DEFENSE

    Click here for price!$28.00Click here for price!$28.00

    The Daniel Defense Vertical Pistol Grips feature a soft touch overmolded gripping area, allowed for improved retention and comfort.   Grips mount to standard Picatinny rails and feature a built-in dual O-ring, water tight storage.  Available in black or DD Milspec+ brown.

    HOT!
  • PICATINNY ABS VERTICAL GRIP SOG ARMORY More Detail

    PICATINNY ABS VERTICAL GRIP SOG ARMORY

    Click here for price!$39.99Click here for price!$39.99

    Rubber-Coated Gripping Surface For Maximum Weapon Control Molded vertical grip with tread-like, rubber coating ends the potential for loss of weapon control in wet, slippery conditions, or when hands become slick with sweat. Made from a new, graphite blend that reduces weight without compromising strength or rigidity. Will not heat up during high volume shooting sessions or after exposure to sunlight for long periods. Deep, textured, block pattern sticks to your hand for an exceptional grip. Dovetail locks onto any Picatinny or Weaver-style, handguard rail. Lockdown post with threaded cap provides a snug, pressure fit that won’t rattle loose under recoil or rigorous use. AR-15, Issue:11, Page:057 Big Book Catalog, Issue:69, Page:059

    HOT!
  • PICATINNY VERTICAL GRIP DANIEL DEFENSE More Detail

    PICATINNY VERTICAL GRIP DANIEL DEFENSE

    Click here for price!$0.00Click here for price!$0.00

    Lightweight, Streamlined, No-Snag Design Improves Weapon Control & Maneuverability Ergonomically shaped vertical forend grip gives the shooter a secure, comfortable hold for positive control and easy maneuvering in close-quarter environments. Durable, lightweight molded nylon construction with checkered finger positions and ribbed panels to ensure a full, positive grip. Attaches securely to any Picatinny handguard rail simply by tightening the cap of the internal storage compartment – no nuts, clamps, or thumbscrews on the exterior to snag on other gear or foliage. O-ring sealed, water-tight inner chamber holds one AA or AAA battery, or two CR-123 batteries. No tools required for installation. AR-15, Issue:09, Page:049 Big Book Catalog, Issue:67, Page:052

    HOT!
  • PICATINNY VERTICAL GRIP KNIGHTS ARMAMENT More Detail

    PICATINNY VERTICAL GRIP KNIGHTS ARMAMENT

    Click here for price!$67.13Click here for price!$67.13

    Forward, vertical pistol grip designed to mount to any MIL-STD-1913 rail.

    HOT!
  • KEYMOD LONG VERTICAL GRIP SAMSON MANUFACTURING CORP More Detail

    KEYMOD LONG VERTICAL GRIP SAMSON MANUFACTURING CORP

    Click here for price!$56.99Click here for price!$56.99

    Improves Control & Hold On Rifle Specifically made for Keymod rails, these solid aluminum grips allow the user to have a proper hand placement on the foreend with no gap or Picatinny rail interference. Solid aluminum grip mounts directly to handguard using the supplied attachment point. Grip features a solid steel rod through the center for added strength and to permit quick detachment. Low profile mounting plate will not get in the way even when the grip is removed and the stainless steel backer bar keeps the plate securely in place.

    HOT!
  • PICATINNY BCMGUNFIGHTER VERTICAL GRIP BRAVO COMPANY More Detail

    PICATINNY BCMGUNFIGHTER VERTICAL GRIP BRAVO COMPANY

    Click here for price!$39.99Click here for price!$39.99

    Angled Grip Mounts Forward Or Rearward, Has Built-In Storage Slightly angled vertical grip attaches facing forward or in reverse, providing added comfort while accommodating preference and shooting style. A forward tilt increases the rigidity of the forearm and allows for more natural wrist angle, or switch to a rearward mount to enhance control when grabbing the handguard and grip. Flat sides with aggressive texturing and raised horizontal ridges on the frontstrap and rearstrap ensure rotational control and solid grasp. Hinged trap door on the bottom opens by squeezing two tabs on each side to access an internal storage compartment, sealed with a water-resistant rubber plug and generously sized for spare parts and accessories. Metal crossbolt securely fastens removable clamps to any 1913 Picatinny tactical rail, and clamps can be swapped so the screw head is on either side of your carbine. Two springs keep the bolt-side clamp open when loosened and make for easy installation and removal. Bolt has a flat head that works with improvised tools, like a quarter, for simple adjustment and retightening, while an octagonal nut on the threaded end of the bolt fits into a molded recess to prevent it from spinning. Top of the grip has two recoil lugs to keep the bolt centered in a rail slot. AR-15, Issue:11, Page:057 Big Book Catalog, Issue:69, Page:057 Big Book Catalog, Issue:69, Page:058

    HOT!
  • PICATINNY FOLDING VERTICAL GRIP COMMAND ARMS ACC More Detail

    PICATINNY FOLDING VERTICAL GRIP COMMAND ARMS ACC

    Click here for price!$30.00Click here for price!$30.00

    Improves Handling, Comfort & Controllability Injection-molded, polymer-resin, forend grips improve stability and overall rifle control by giving your forward hand a comfortable, hand filling, textured gripping surface. Helps you maintain a natural fighting stance, reduces on-target time, and helps maintain muzzle control during rapid fire. Hollow center provides convenient storage space for spare batteries or other small items; rubber cap keeps out dust and moisture. Clamps securely to forends with Picatinny or Weaver-style rails on underside. Five-position locking system with push-button release allows the grip to be extended 90° from handguard or at a 45° forward or rearward angle. Folds parallel with the handguard, forward or rearward, when not in use. Clamps to rail with a steel crossbolt. AR-15, Issue:11, Page:058 Big Book Catalog, Issue:69, Page:058

    HOT!
  • MODULAR VERTICAL FOREGRIP LASER LIGHT CRIMSON TRACE CORPORATION More Detail

    MODULAR VERTICAL FOREGRIP LASER LIGHT CRIMSON TRACE CORPORATION

    Click here for price!$419.99Click here for price!$419.99

    Self-Contained System With Laser Sight & Dual-Output Tactical Light Crimson Trace® presents the MVF-515 Red; a revolutionary, patent-pending concept that combines three tactical tools for your AR style rifle into a single modular package. With a rock-solid 6061-T6 aircraft aluminum hard-anodized tang as the foundation of the foregrip, the unit also features a red laser sight and a 150/200 Lumen-LED light module. The laser and light are instinctively activated as you hold the weapon, and activation switches are ambidextrous. This allows operators to select the light or the laser individually or simultaneously. Both laser and light functions are programmable with three illumination modes to select from including: independent momentary, strobe or constant beam. A master on/off switch permits complete shutdown of either laser or light. Being a modular unit, users may separately purchase a green laser module for direct replacement. AR-15, Issue:11, Page:103 Big Book Catalog, Issue:67, Page:093

    HOT!
  • PICATINNY VERTICAL FOREGRIP GG&G, INC. More Detail

    PICATINNY VERTICAL FOREGRIP GG&G, INC.

    Click here for price!$32.50Click here for price!$32.50

    Better Control & Recoil Management; Reduced Hand Fatigue In The Ready PositionLightweight vertical grip clamps securely to Picatinny forend rail to give the operator a more comfortable shooting stance and better weapon control. Helps control muzzle climb during sustained fire for quicker, more accurate follow-up shots, and minimizes hand fatigue when holding weapon in the ready position for long periods of time. Shape is narrow at the top for secure purchase by the thumb and forefinger, with a palm-filling swell at the middle, and wide, deep, concentric ribs around the lower 1/3 of the grip for a comfortable, ultra-secure grasp. Removable core has a large, waterproof storage compartment that can hold a spare bolt assembly, two AA or CR123 batteries, or other small parts. Screw-on, O-ring sealed cap removes easily and has padded interior to prevent rattling of items inside. Easy-to-use clamping system attaches simply by unscrewing the entire core, sliding the grip onto the rail, and lining it up over a slot with the aid of the alignment windows. Then screw the core back in tight for a rock-solid attachment that wont let loose. Reinforced, Acetal cold polymer construction handles the knocks and dings of tactical operations, as well as extremes of heat, cold, and humidity. AR-15, Issue:11, Page:058 Big Book Catalog, Issue:69, Page:058

    HOT!
  • PICATINNY VG1 FINGER GROOVE VERTICAL GRIP MISSION FIRST TACTICAL, LLC More Detail

    PICATINNY VG1 FINGER GROOVE VERTICAL GRIP MISSION FIRST TACTICAL, LLC

    Click here for price!$19.99Click here for price!$19.99

    Improves Handling, Comfort & Controllability; Provides Extra Storage Injection-molded, polymer-resin, forend grips improve stability and overall rifle control by giving your forward hand a comfortable, hand filling, textured gripping surface. Helps you maintain a natural fighting stance, reduces on-target time, and helps maintain muzzle control during rapid fire. Hollow center provides convenient storage space for spare batteries or other small items; rubber cap keeps out dust and moisture. Clamps securely to forends with Picatinny or Weaver-style rails on underside. Ergonomically designed grooves keep your fingers properly positioned for repeatable hand placement and excellent recoil control, even in full-auto mode. VG1 has quick-detach push-button locking system with slimmer profile and straight backstrap. AR-15, Issue:11, Page:058 Big Book Catalog, Issue:68, Page:056

    HOT!
  • KEYMOD SHORT VERTICAL GRIP SAMSON MANUFACTURING CORP More Detail

    KEYMOD SHORT VERTICAL GRIP SAMSON MANUFACTURING CORP

    Click here for price!$52.99Click here for price!$52.99

    Specifically made for Keymod rails, these solid aluminum grips allow the user to have a proper hand placement on the foreend with no gap or Picatinny rail interference. Solid aluminum grip mounts directly to handguard using the supplied attachment point. Grip features a solid steel rod through the center for added strength and to permit quick detachment. Low profile mounting plate will not get in the way even when the grip is removed and the stainless steel backer bar keeps the plate securely in place.

    HOT!
  • PICATINNY CX4 FOLDING GRIP POLYMER BLACK BERETTA USA More Detail

    PICATINNY CX4 FOLDING GRIP POLYMER BLACK BERETTA USA

    Click here for price!$60.71Click here for price!$60.71

    FITS: CX4 Storm Big Book Catalog, Issue:68, Page:580

    HOT!

Subscribe our newsletter

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Ex, velit!